WHCC 2023 Show Buy Sell Trade

[jimt1971 237]

Karen is looking to sell her 701. Here are the pictures $1000 or best offer. Contact her here kthack657.

[Sparky-(Admin) 21,318]

3 hours ago, squonk said:

Nice pair of 8" front wheels 6 1/2" wide. Fits 3 3/4" spindles. Sealed bearings. I think these were off of a WorkHorse. $50.00

 

 

 

 

 

I’ll take the front wheels Mike. 
  @squonk

[JoeM 7,874]

ISO one 8 1/2" wide rear wheel with WH offset. (reasonably priced) 

[stevebo-(Moderator) 8,330]

I have a couple more items to bring:

 

1. nice 8 speed 1 1/8” axle tranny $175. Hubs were drilled and bolt/nut used to hold rims on. 
 

2. 6x12 waffle tires. Bridgestones. Decent shape probably need to tube them but hard to find. $75 

SOLD !!

 

3. 1055 motor. Almost complete but carb and fuel pump removed. Runs great with very small puff smoke on start up. I heard it run. $175

 

4. Locked up 953 or 1054 motor. Complete. $50

 

5. 953 rear axle tach a matic $60

 

6. homemade rear tach matic $25

 

 

7. 953 style steering wheel $30 each 

[fast88pu 3,324]

Onan 20hp. Ran off carb cleaner. Was on a tractor I took parts off of. It's pretty much complete. $100

[ljsdad414 101]

D series 56” plow. Missing angle lever, good shape.  
I will be at the show Friday morning 

 

$200.  SOLD

 

 

 

 

Edited June 16, 2023 by ljsdad414

[Raposo 530]

- 23” tire chains $35 (two repair links on one of them) 

- small craftsman wheel weights, could be used as front weights or have custom brackets to use with 12” rear rims - $45

- 12” rear rims, 7.5x12 tires- tires are dry rotted but rims are in decent shape $50

- Mule drive, cracked knob otherwise good shape $25

- seat pan off newer toro style with seat bracket $35

[wallfish 17,002]

11 hours ago, fast88pu said:

Onan 20hp. Ran off carb cleaner. Was on a tractor I took parts off of. It's pretty much complete. $100

 

Interested in the engine Kyle. I'll take it.

[whfan74 2,066]

Loving the build up!  Still packing for sale items.

Just over a week away!

[fast88pu 3,324]

1 hour ago, wallfish said:

Interested in the engine Kyle. I'll take it.

Sold ill bring it down

[stevebo-(Moderator) 8,330]

33 minutes ago, fast88pu said:

Sold ill bring it down

John and Jay will have it running on a tractor by Friday at 10am 😂

[wallfish 17,002]

3 hours ago, stevebo said:

John and Jay will have it running on a tractor by Friday at 10am 😂

Ha, that's the plan. Find a roller for it and get it driving around by Saturday. Hopefully on Friday.

It helps the vendors out with selling parts because we buy all the parts needed, someone gets a running driving tractor for a fair price plus we get to wrench away on one.

I can use the pulley and muffler for something else anyway even if that plan falls through and the motor isn't 100%. Still a fair price from Kyle just for those.

Last years trans swap was a time consuming challenge for doing that in a field with limited tools. It wasn't a straight bolt on thing. The only saving grace was getting an 8 speed from Van @Wheel-N-It and James or we would of been $100 in the red.

 

4 hours ago, fast88pu said:

Sold ill bring it down

Thanks Kyle. Looking forward to seeing you down there

[fast88pu 3,324]

No problem, see you there

[Wheel-N-It 2,969]

My pleasure John. It was an honor to help my Wheel Horse Brother 

I'll be seeing you next week !

 

[stevebo-(Moderator) 8,330]

I have a 42” 300 series snow plow with rear tach a matic bracket. Plow blade and frame were repainted by po but it is complete with all hardware and lift link. Plow itself has slight bend but overall good usable plow. $150 for all delivered to the show. 

[ljsdad414 101]

GT 14 deck, not pretty but works $50

GT 14 fuel tank, no leaks $75

GT 14 seat one corner is ripped, $50

Eaton rear from a running 520H, $60
520 front wheels, tires are shot, $60

prices negotiable 
I will be at the show Friday morning 

 

 

Edited June 18, 2023 by ljsdad414

[ljsdad414 101]

ISO a C161 auto, the Kohler single cylinder model.   If anyone is bringing one to the show, I will be there Friday.  Thanks in advance 

[S416-8 325]

I am bringing down the following to sell:

 

416-8 that I have listed in the classifieds. 

A couple plows, 1 complete,  $75  1 at 95% complete $50  and an extra blade $25

Plastic WH wheel weights $75

At least one set of wheel chains, $25

2 mule drives  $25 ea

Spacers $50

New tires with rims $225

Tires still have a paper tag. Maybe a partial trade for 529 deep dish rims.
 

 

 

 

Never been to the show so not sure of what the selling process is but will be bringing the stuff in on Thur afternoon and staying until late afternoon on Fri.

 

Edited June 19, 2023 by S416-8
added pics

[Ed Kennell 38,196]

3 hours ago, S416-8 said:

not sure of what the selling process is

You must be a member of the Wheel Hore Collectors Club to sell.   You can join at the show or on line.

[S416-8 325]

thanks and already joined so good there... guess I'll show up with the trailer and see where I am directed thanks

[Ed Kennell 38,196]

22 minutes ago, S416-8 said:

see where I am directed thanks

Pretty much...find a spot...first come..

[zigzag 127]

I have a seat bracket that came off a 312-8 and a lift lever free to whoever wants them. I will be there Friday. 

[stevebo-(Moderator) 8,330]

Dig out some more items for sale… 

 

1. RJ58 original mower deck ready to install asking $175

 

2. Restored RJ58 mower deck with NOS recycling kit (very rare) $425

 

3. Front mule drive in good shape $40

 

4. 953/1054 4 link-v bar tire chains $40

 

5. 520xi feint mule drive (no pic) missing front knob $75

6. RJ 58 or any round hood (round seat pan) cover that is high quality older and not eBay cover $50

7. 520 throttle and choke cables $25

 

[cafoose 3,355]

1 hour ago, stevebo said:

953/1054 tire chains $40

If the tire chains are 2 link I'll take them.

[stevebo-(Moderator) 8,330]

1 minute ago, cafoose said:

If the tire chains are 2 link I'll take them.

Let me check. I also have a rear plow bracket if interested