WHCC 2023 Show Buy Sell Trade

[adsm08 2,064]

15 minutes ago, cafoose said:

With the show coming up, I'll bet you can find a hydro for that short frame. Maybe you can get rid of some at the show? I may be interested in a trade for the tiller depending what you have. Tillers are getting scarce so maybe you should get this while you can

 

The tractors that I am trying to get rid of are a 1971 800 Special that needs some TLC. The big things that I know of are a leaking fuel shutoff, a weak S/G unit (charges ok, won't restart well on a hot-soak) and 3rd gear on the Peerless works, but pops out. Also, the cable clamp for the choke rattled loose and is MIA. I tried to sell it last year but had no takers.

 

Also trying to get rid of a pair of 66 JDs. A 110 and a 112. Both need a lot of work.

 

I'd give you all three in trade for the tiller. Even if I can't use in on anything I have it would take up less space.

Edited May 6, 2023 by adsm08

[rmaynard 15,501]

38 minutes ago, cafoose said:

With the show coming up, I'll bet you can find a hydro for that short frame. Maybe you can get rid of some at the show? I may be interested in a trade for the tiller depending what you have. Tillers are getting scarce so maybe you should get this while you can

 

Someone need a hydro? I have one from either an 875 or 877 just sitting in my shed.

[cafoose 3,355]

1 hour ago, adsm08 said:

 

I'd give you all three in trade for the tiller.

Nothing personal but I'm not interested in any green things Also I only like horizontal shaft . I suggest checking on that hydro needing a hydro that you mentioned and also the hydro unit from @rmaynard

[stevasaurus 22,759]

 

Edited May 10, 2023 by stevasaurus

[adsm08 2,064]

9 hours ago, cafoose said:

Nothing personal but I'm not interested in any green things Also I only like horizontal shaft . I suggest checking on that hydro needing a hydro that you mentioned and also the hydro unit from @rmaynard

 

The 800 is horizontal. It's an 8HP horizontal Briggs.

 

And I don't know what the one I drive by is, just a short frame that looks like it has no rear end. It sits far enough from the road and at an angle that I can't see much of it. I just l know it's a short frame square hood.

Edited May 6, 2023 by adsm08

[cafoose 3,355]

1 hour ago, adsm08 said:

 

The 800 is horizontal. It's an 8HP horizontal Briggs.

 

And I don't know what the one I drive by is, just a short frame that looks like it has no rear end. It sits far enough from the road and at an angle that I can't see much of it. I just l know it's a short frame square hood.

I would inquire about that short frame if I was you. You may get it really cheap. You did say the 800 has a peerless rear? If so, I'm not interested in that either.

[adsm08 2,064]

17 minutes ago, cafoose said:

I would inquire about that short frame if I was you. You may get it really cheap. You did say the 800 has a peerless rear? If so, I'm not interested in that either.

I would love to, but I literally HAVE to get rid of these other tractors before I even consider bringing anything else home. There is nowhere to put it.

[FAST 87]

I’m looking for the dates of the Big Show in Pennsylvania. Can’t find them anywhere. Not on the calendar on this site or anything I search here no dates come up. Never been to one and would love to see if I can make the trip this year. Any help is appreciated.

[Sparky-(Admin) 21,318]

11 minutes ago, FAST said:

I’m looking for the dates of the Big Show in Pennsylvania.  Any help is appreciated.

https://wheelhorseclub.com/

 

[Monstrosity 1,128]

Anyone looking for a white 10hp techumseh solid state engine? I'll be bringing one to the show if anyone is interested message me. 

Edited May 8, 2023 by Monstrosity

[squonk 41,136]

Selling top axle bracket. Picture for comparison. It was used on my 953. Not sure if it was correct one or not. $25 SOLD!!!

 

Edited May 31, 2023 by squonk

[squonk 41,136]

48" deck with mule drive. Going to need a little TLC. $150 or BO

 

 

[clueless 3,002]

Anybody going to have a nice 854 for sell?

 

[stevebo-(Moderator) 8,330]

I have a 42” plow with rear bracket and mid mount down pressure bracket. Blade bent some and cutting edge needs replace. Po painted it. Came with machine I recently purchased but do not need. $200 for all delivered to the big show!

[Ed Kennell 38,196]

Most of you know I am assisting Guy Myers in the liquidation of Jay's  (Roadapples) wheel Horse collection.

The collection has been listed in the classified section for several months and many items have been sold and delivered or held for pick up at the big show.

 We appreciate the response and thank all those that bought a part of Jay's collection.

I have updated the ads to show the items that have been sold.

Thanks to Karl, the ads have been reposted in the classifieds.

Many items remain for sale and can be picked up at the big show.   We will be bringing the remaining collection to the show in June.

I will try to add links to the classified ads here, but if it doesn't work, you can search the classifieds for "Roadapples" and they should pop up.

If you are interested in a purchase, PM me and I will put you in contact with Guy to arrange payment and delivery or pick up at the show.

 

.Roadapples seats, hubs,520 steering,spindles,hitches,misc. - Wheel Horse for Sale - RedSquare Wheel Horse Forum

 

Roadapples snow blower, decks, wheels, tires, rubber chains - Wheel Horse for Sale - RedSquare Wheel Horse Forum

 

Roadapples tub cart, snow plow, Brinly furrow plow - Wheel Horse for Sale - RedSquare Wheel Horse Forum

 

Roadapples Engines and Transmissions - Wheel Horse for Sale - RedSquare Wheel Horse Forum

 

Roadapples tractor collection - Wheel Horse for Sale - RedSquare Wheel Horse Forum

 

Check the ads closely......I did not delete the pictures of the sold items, but they are marked   SOLD.

 

 

                                                                     

 

 

 

 

 

 

 

 

 

 

 

 

[953 nut 55,280]

16 minutes ago, Ed Kennell said:

We will be bringing the remaining collection to the show in June.

Ed, if you need a trailer and truck to haul some of Jay's collection I will be glad to help once my trailer is empty.      

[Ed Kennell 38,196]

1 minute ago, 953 nut said:

Ed, if you need a trailer and truck to haul some of Jay's collection I will be glad to help once my trailer is empty.      

Thanks Richard,  when we get closer to the date and know what we need to move. we may need your help.

[Ed Kennell 38,196]

I started to dig out some of the Junque I'll be bringing to the show.     

 

I'll bring the 953 if anyone is interested for $400.   It starts and runs but smokes..  The pump and lift work.  The Ross steering box could be rebuilt.   The PTO lever support bracket is missing.    Tail light and choke lever knob missing.

 

 

Round fenders     $40

 

 

PTOs      $30

 

Spring loaded mule drive used on 520s with 60" deck       $35

 

Older style frame mounted mule drive   $30      

 

New TORO   #106636   mower blade set     $30

 

Kohler, Onan, and B&S   new parts.     Please   PM for part numbers and prices.

 

 

Buckets of deck, attach-o-matic, lift levers, spindles, axles, seat, tire chains, belts, and other misc hardware will also be coming.

 

 

Edited May 14, 2023 by Ed Kennell

[kthack657 279]

I will be selling my (old) restored 701...will supply pictures if requested.  Looking for $1000 OBO

[elcamino/wheelhorse 9,314]

On 5/13/2023 at 12:47 PM, Ed Kennell said:

I started to dig out some of the Junque I'll be bringing to the show.     

 

I'll bring the 953 if anyone is interested for $400.   It starts and runs but smokes..  The pump and lift work.  The Ross steering box could be rebuilt.   The PTO lever support bracket is missing.    Tail light and choke lever knob missing.

 

 

Round fenders     $40

 

 

PTOs      $30

 

Spring loaded mule drive used on 520s with 60" deck       $35

 

Older style frame mounted mule drive   $30      

 

New TORO   #106636   mower blade set     $30

 

Kohler, Onan, and B&S   new parts.     Please   PM for part numbers and prices.

 

 

Buckets of deck, attach-o-matic, lift levers, spindles, axles, seat, tire chains, belts, and other misc hardware will also be coming.

 

 

I get dibs on the first to look in magic buckets 

[Handy Don 12,233]

1 hour ago, elcamino/wheelhorse said:

I get dibs on the first to look in magic buckets 

Right. 

[squonk 41,136]

[S416-8 325]

I’m thinking of bring down my 416-8 and some plow parts to sell so I can feed and get a nice and low hour 520 follow me home. 

[squonk 41,136]

@Mike'sHorseBarn I'll offer $20 for the deck if you aint junked it yet

 

[Mike'sHorseBarn 2,998]

5 hours ago, squonk said:

@Mike'sHorseBarn I'll offer $20 for the deck if you aint junked it yet

 

I actually got that sold. Couldn't edit the post to say so, sorry!