Red-Bovine 309 #51 Posted January 26, 2023 Thank you! It is a GX630, rated at 20.8 hp. So it is about the same as the 20 hp Onan it replaced. The engine and kit from Repower Specialists in Oregon worked very well and the engine fit in perfectly. A slight modification of the clutch bracket was all I needed to do. Working great for ten years now. It has been relegated to just a snow machine for the last 5 years. Getting too old and lazy to switch things around seasonally. 1 Share this post Link to post Share on other sites
ebinmaine 67,464 #52 Posted January 26, 2023 Just now, Red-Bovine said: lazy There's a fine line between laziness and efficiency. I like to say I'm EFFICIENT. 1 Share this post Link to post Share on other sites
Handy Don 12,217 #53 Posted January 26, 2023 2 minutes ago, ebinmaine said: There's a fine line between laziness and efficiency. I like to say I'm EFFICIENT. In my experience, laziness (of a sort) drives efficiency. But that’s just my experience when I wasn’t too lazy to think about it. 1 1 Share this post Link to post Share on other sites
Racinbob 11,074 #54 Posted January 26, 2023 We about tripled what we've had all season so far. About 3". I wanted to get it off the drive because it was so wet and frigid temperatures are on the way. This one got the call today. The 76 is trying to hide behind it. I'm not going to ask what those two do when I'm not around. 3 3 2 Share this post Link to post Share on other sites
mr biggs 187 #55 Posted January 26, 2023 2 hours ago, Red-Bovine said: Thank you! It is a GX630, rated at 20.8 hp. So it is about the same as the 20 hp Onan it replaced. The engine and kit from Repower Specialists in Oregon worked very well and the engine fit in perfectly. A slight modification of the clutch bracket was all I needed to do. Working great for ten years now. It has been relegated to just a snow machine for the last 5 years. Getting too old and lazy to switch things around seasonally. I suppose it wasn't cheap huh, a couple 2-3 grand I'm sure?? Share this post Link to post Share on other sites
Lane Ranger 10,968 #56 Posted January 26, 2023 Used my B-80 and 42 inch Wheel Horse snowplow today on neighbors drive and mine. I forgot to turn my handle around to the other side ( I was using plow on other tractors) before installing. I will have to do this tomorrow! 1 1 Share this post Link to post Share on other sites
mr biggs 187 #57 Posted January 26, 2023 (edited) 5t 17 hours ago, Lane Ranger said: Used my B-80 and 42 inch Wheel Horse snowplow today on neighbors drive and mine. I forgot to turn my handle around to the other side ( I was using plow on other tractors) before installing. I will have to do this tomorrow! Ahhhhh long lives the b80 I used to mow my ditch with one for years Edited January 27, 2023 by mr biggs 1 Share this post Link to post Share on other sites
ebinmaine 67,464 #58 Posted January 26, 2023 Today Trina and I cleared the driveway with a great set-up. She used her go-to worker Pigpen 867 and I hopped on our fantabulous @wallfishbuilt Wally Digger machine to move some muck !! 1 Share this post Link to post Share on other sites
Red-Bovine 309 #59 Posted January 26, 2023 4 hours ago, mr biggs said: I suppose it wasn't cheap huh, a couple 2-3 grand I'm sure?? It was about 2k back in 2013. I think the kit with engine is about 3.5k now. It is very complete and easy to install. 1 Share this post Link to post Share on other sites
Lane Ranger 10,968 #60 Posted January 27, 2023 On 1/25/2023 at 11:15 AM, lynnmor said: And then there are the ones without wings. I took the wings off to fit in the garage! Four other Wheel Horse tractors behind the 314 with Snowblower -plus a large rolling tool box! I think I clear the door by about three inches! 2 1 Share this post Link to post Share on other sites
Evguy 556 #61 Posted January 27, 2023 I don’t have a wheelhorse for snow…🙁. Yet… 1 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #62 Posted January 27, 2023 3 hours ago, Evguy said: I don’t have a wheelhorse for snow…🙁. Yet… That thing is DOPE! Looks like a Transformer... 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,553 #63 Posted January 27, 2023 Steiner? @Evguy Share this post Link to post Share on other sites
Evguy 556 #64 Posted January 28, 2023 24 minutes ago, SylvanLakeWH said: Steiner? @Evguy Steiner s-20, pretty awesome plowing machine 1 Share this post Link to post Share on other sites
ML3 1,201 #65 Posted April 25, 2023 1984 C105 w/snowblower 1964 654 w/plow 4 1 Share this post Link to post Share on other sites
JCM 9,155 #66 Posted April 25, 2023 520-H 418-A and 417-8 1 3 Share this post Link to post Share on other sites
ML3 1,201 #67 Posted April 25, 2023 4 hours ago, JCM said: 520-H 418-A and 417-8 Share this post Link to post Share on other sites
ML3 1,201 #68 Posted April 25, 2023 Your 2 stage setups are just what I eventually want to get. Nice!!!! 1 Share this post Link to post Share on other sites
