Evguy 556 #1 Posted December 21, 2022 I noticed a panel is missing from my b100, I can make a new one if needed but I haven’t found a good picture of it. question is, is it supposed to have ammeter in the panel? Side note, if anyone has one, I would be interested in purchase. Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #2 Posted December 21, 2022 Not an amp meter…I think the voltage regulator goes in that space. 2 Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #3 Posted December 21, 2022 I might be wrong….amp meter and the voltage regulator goes there.. 5 1 Share this post Link to post Share on other sites
Tonytoro416 1,034 #4 Posted December 21, 2022 Sparky you are correct. I will look tomorrow to see if the one I have in the barn is worth anything 1 1 Share this post Link to post Share on other sites
Evguy 556 #5 Posted December 21, 2022 8 minutes ago, Sparky said: I might be wrong….amp meter and the voltage regulator goes there.. Dash Looks different, mine is 1977, Share this post Link to post Share on other sites
Tonytoro416 1,034 #6 Posted December 21, 2022 Dash could be a tad different but I believe the regulator and gauge definitely goes below. I think the b100 I have is 76. I’ll look tomorrow for you see if it’s any good or not 1 Share this post Link to post Share on other sites
ebinmaine 67,464 #8 Posted December 21, 2022 6 hours ago, Evguy said: Ok, thanks Where is your VR now? Share this post Link to post Share on other sites
Racinbob 11,075 #9 Posted December 21, 2022 Originally it was the regulator and ammeter. The ammeter often gets swapped out for a voltmeter. My 76 here. 4 1 Share this post Link to post Share on other sites
ebinmaine 67,464 #10 Posted December 21, 2022 1 minute ago, Racinbob said: Originally it was the regulator and ammeter. The ammeter often gets swapped out for a voltmeter. My 76 here. Similar to the setup I'm doing on the Automatic restoration. 6 Share this post Link to post Share on other sites
Evguy 556 #11 Posted December 21, 2022 5 hours ago, ebinmaine said: Where is your VR now? I haven’t spent much time on this project, engine was swapped, either different regulator or maybe no regulator 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,041 #12 Posted December 21, 2022 Item 8-47 https://www.partstree.com/models/61-10k803-b-100-toro-lawn-tractor-1976/8-000-sheet-metal-and-covers-fig-8-8/ 2 Share this post Link to post Share on other sites
Racinbob 11,075 #13 Posted December 21, 2022 1 hour ago, Evguy said: I haven’t spent much time on this project, engine was swapped, either different regulator or maybe no regulator A lot of replacement engines have the regulator mounted here. 40 engine hours ago I put a rebuilt K-341 on it and went back to the original style regulator. The engine in this picture is the K-341 I installed in the 70's. 1 Share this post Link to post Share on other sites
Evguy 556 #14 Posted December 21, 2022 3 minutes ago, Racinbob said: A lot of replacement engines have the regulator mounted here. 40 engine hours ago I put a rebuilt K-341 on it and went back to the original style regulator. The engine in this picture is the K-341 I installed in the 70's. I went to barn and had a look, regulator is mounted on the engine. Share this post Link to post Share on other sites
Tonytoro416 1,034 #15 Posted December 22, 2022 I looked in the barn at my B-100 and it’s missing that plate as well Sorry I couldn’t remember 1 1 Share this post Link to post Share on other sites
Evguy 556 #16 Posted December 22, 2022 5 minutes ago, Tonytoro416 said: I looked in the barn at my B-100 and it’s missing that plate as well Sorry I couldn’t remember I’ll probably just fabricate one, thanks Share this post Link to post Share on other sites
WHX?? 48,815 #17 Posted December 22, 2022 (edited) I might have one you can have for shipping EV dude. Havta look if the magic parts shed she don't get snowed in! Fab would be easy if you have a template. @Achto just made a similar one for a 953 tunnel. Edited December 22, 2022 by WHX?? 3 Share this post Link to post Share on other sites
WHX?? 48,815 #18 Posted December 22, 2022 12 hours ago, ebinmaine said: Similar to the setup I'm doing on the Automatic restoration. I can see you misplaced your rose colored glasses again... 1 1 Share this post Link to post Share on other sites
ebinmaine 67,464 #19 Posted December 22, 2022 1 hour ago, WHX?? said: I can see you misplaced your rose colored glasses again... Apparently got white paint on 'em. 1 Share this post Link to post Share on other sites
WHX?? 48,815 #20 Posted December 31, 2022 You ever find one @Evguy I did spy one in the parts shed if interested. 3 Share this post Link to post Share on other sites
Evguy 556 #21 Posted December 31, 2022 41 minutes ago, WHX?? said: You ever find one @Evguy I did spy one in the parts shed if interested. I resigned myself to making one, but if you have a spare I’m interested. 1 Share this post Link to post Share on other sites
