953 help

[Ed Kennell 38,048]

Started to but Fred back together.       I didn't take pictures cause I know every parts location on a ....wrong.

Is this the proper location of the deck attachment bracket ?   I couldn't find it in the manuals and I don't have a deck.

Are you there Richard? @953 nut      thanks

[Pullstart 62,812]

It LOOKS correct Ed.  Could you use shoulder bolts from the inside?

[Ed Kennell 38,048]

2 minutes ago, Pullstart said:

It LOOKS correct Ed.  Could you use shoulder bolts from the inside?

Thanks Kev.    No shoulder bolts or bushings when I disassembled, but it does look they should be used.

[peter lena 8,589]

@Ed Kennell  would not hesitate to washer and elastic lock nut  that set up , pete

[RandyLittrell 3,877]

Maybe some tubing for a bushing? 

 

 

 

Randy

[Ed Kennell 38,048]

6 minutes ago, RandyLittrell said:

Maybe some tubing for a bushing? 

 

 

 

Randy

Yep, all ready in the works Randy.  Thanks

[953 nut 55,120]

14 hours ago, Ed Kennell said:

Are you there Richard? @953 nut 

Had a heavy storm last night and the internet was down. Your memory is better than you give yourself credit for.      

[squonk 41,040]

I don't want to jinx you Ed, but that fuel pump is one that hasn't performed the best in the past. Is it easy to get too? 

 

I mounted my Facet pump right under the tool box slot in the rear for easy service.

Edited December 15, 2022 by squonk

[Ed Kennell 38,048]

14 minutes ago, squonk said:

Is it easy to get too? 

Yes it is.         I had a couple fail early as well as an expensive one.     There is some indication failure of the electric pumps may be caused by dirt or running dry.

I started putting a filter on the pump inlets and it seems to help.

[Ed Kennell 38,048]

OK 953 owners, I need more help.    Is this the correct hose layout?

 

BTW, 1/4" pipe was the exact ID and OD to make the bushings for the deck hanger.