Bill D 1,922 #26 Posted December 31, 2022 7 hours ago, c-series don said: @Blasterdad I’m finally getting around to removing the clutch today. I can see the balls ready to fall out just looking at it, so I assume the bearing is shot. Plus it makes a heck of a noise when running and not engaged. I’ll gladly compensate you for your time and the clutch if you can fix yours. Does anyone know why it’s not bolted solid and has a pin with a cotter pin to keep it from spinning? Can the bearing be replaced? I know people have rebuilt them. 1 Share this post Link to post Share on other sites
Blasterdad 2,692 #27 Posted December 31, 2022 7 minutes ago, Bill D said: Can the bearing be replaced? I know people have rebuilt them. Yes, a reply on the first page of this thread shows how to do it, I think it has the part numbers too... Share this post Link to post Share on other sites
Blasterdad 2,692 #28 Posted December 31, 2022 @Bill D Share this post Link to post Share on other sites
c-series don 8,712 #29 Posted January 22, 2023 (edited) Update: I fixed the charging problem, couple loose connections and a bad ground. Also a battery that would no longer take a charge. Then did a complete service on it. The electric clutch had a bad bearing, thanks to @daveoman1966 for posting the proper way to remove the clutch. I used this method and it came right off! I was doing this for the owner of the tractor who I think is well into his eighties and the original owner of this machine. I mentioned earlier that I wasn’t charging him anything, I am just very happy to be able to help him. He really loves his Wheel Horse! Upon reading this post Blasterdad contacted me to say he had a clutch, he informed me that there would be no charge since I was just helping this gentleman. He sent me the clutch and even covered the shipping cost! So a BIG SHOUTOUT to @Blasterdad to say I genuinely would like to thank you for making both myself and my buddy Bill happy! Thank you to all that chimed in to help. @ebinmaine @Bill D @953 nut @pfrederi @peter lena @Handy DonHe’s back up and running now and drove it home yesterday. Amazing how much joy these tractors bring all of us! Here he is on his way home. Edited January 22, 2023 by c-series don 6 5 Share this post Link to post Share on other sites
TractorEd 633 #30 Posted January 27, 2023 On 1/22/2023 at 6:38 PM, c-series don said: Amazing how much joy these tractors bring all of us! Here he is on his way home That is so darned awesome! Great! 1 2 Share this post Link to post Share on other sites
