case442 130 #1 Posted December 13, 2022 Hello all, I have a 1997 314H that I’m looking for the lift arm or bracket to attach the snow blade to the rock shaft. I see that there are two different lengths available. Would anyone know which arm would be used on this tractor? I appreciate your help. Thank you, Mike Share this post Link to post Share on other sites
Achto 27,517 #2 Posted December 13, 2022 41 minutes ago, case442 said: Would anyone know which arm would be used on this tractor? If you do not need down pressure you can use a chain. Down pressure is nice to have though. 3 Share this post Link to post Share on other sites
953 nut 55,124 #3 Posted December 13, 2022 If you want to go directly to the rock shaft the long link should be the one you want. If you want to connect to the mower lift arm so the blade has float and follows the couture of the driveway which I would advise then you want the short one or a chain. 4 Share this post Link to post Share on other sites
peter lena 8,589 #4 Posted December 13, 2022 @case442 done an aerosol lubrication spray / soak down to all bearing / bushing related end areas ? look up a breakdown drawing , especially end areas , make the rust run out , that will make all related movement area s move as they should , pete Share this post Link to post Share on other sites
Racinbob 11,046 #5 Posted December 13, 2022 Here you go. 2 1 Share this post Link to post Share on other sites
peter lena 8,589 #6 Posted December 13, 2022 @case442 also a very good opportunity to , lubrication detail in that steering quadrant , set up plow on a couple of milk crates , so its supported like under tractor , roller stool around it as you go , aerosol red grease , in the spring loaded slide pin , pop off top and bottom push in covers for access. small channel lock plyers , to snug up lever linkage sloppy / play areas. elastic lock nuts on bolt ends at lever bottom area , grease , dial in and secure consistent smooth / easy lever squeeze and plow swing . hair pin clips 1/8" on back axel lever swing , push thru to last hole , they won't fall out . love doing those , easy ,and so worth it , my plows swing with total ease , zero rust , spray blade face with lubricant , how easy does that work ? don,t have a hydro , so made up a forward front end spring assist , love having easy to use anything , just me , pete Share this post Link to post Share on other sites
case442 130 #7 Posted December 13, 2022 Thank you all, it’s much appreciated now I have a direction to go in. mike 2 Share this post Link to post Share on other sites
