C-160 buyer package

[GAJoe 842]

I bought my C-160 it was from the original buyer's family. They had all of the manuals, a service bulletin, dealer key fob, and even the punch card.

[ebinmaine 67,380]

That's just fantastic.  

 

 

 

 

@JCM

Check it out.  

[23 Reo 229]

I noticed that the spark plug gap spec is .025". I've always set the gap at .035" on my K301s, K321 and K341. I have seen .025" before but have always disregarded it.

Am I setting my spark plug gap correctly?

[ebinmaine 67,380]

7 hours ago, 23 Reo said:

I noticed that the spark plug gap spec is .025". I've always set the gap at .035" on my K301s, K321 and K341. I have seen .025" before but have always disregarded it.

Am I setting my spark plug gap correctly?

 

Might be .025 on the K series and .035 for the Magnum. 

 

We've been using .025 on all our K. 

[953 nut 55,155]

3 hours ago, ebinmaine said:

 

Might be .025 on the K series and .035 for the Magnum. 

 

We've been using .025 on all our K. 

Other way around, 0.025 for Magneto and 0.035 for battery Ignition.

[23 Reo 229]

Are the K341S spec 71128A and 71141A magneto?

[ebinmaine 67,380]

14 minutes ago, 23 Reo said:

71128A

Not that one. Not sure if the other. 

 

My spec  charts show differing information on plug gaps. 

 

I'm not sure what the effect of wrong gaps would be.  

[953 nut 55,155]

2 hours ago, ebinmaine said:

Not that one. Not sure if the other. 

 

My spec  charts show differing information on plug gaps. 

 

I'm not sure what the effect of wrong gaps would be.  

This chart is in the Kohler Service Manual, same gaps.

[ebinmaine 67,380]

18 minutes ago, 953 nut said:

This chart is in the Kohler Service Manual, same gaps.

 

May-happs it's me that's bassackwards???