RandyLittrell 3,877 #1 Posted December 2, 2022 Saw this loader on facebook and had to share it just for the design of it. Beware it's green!!! If not appropriate here please move and sorry! It is compact and looks to be simple to remove if set up right. It is on Just Garden Tractors facebook group. Here are a couple of pics, go search to find it, I don't think I can post a link. 4 1 Share this post Link to post Share on other sites
ebinmaine 67,329 #2 Posted December 2, 2022 Other than the obnoxious color that's cute as a button. I wonder what the safe weight capacity would be considering the mechanism is mounted in front of the front tire. Even if it's only a hundred or 200 lb it still would come in extremely handy. Really would have to make VERY sure of the rear ballast is appropriately distributed. Share this post Link to post Share on other sites
JCM 9,130 #3 Posted December 2, 2022 Obnoxious color ? You've come up with some strange recipe's Sorry bud. couldn't resist. 2 Share this post Link to post Share on other sites
ri702bill 8,296 #4 Posted December 2, 2022 1 hour ago, ebinmaine said: would have to make VERY sure of the rear ballast is appropriately distributed. I think it would become apparent quickly - hopefully not too quickly...... 1 Share this post Link to post Share on other sites
JCM 9,130 #5 Posted December 2, 2022 1 minute ago, JCM said: Obnoxious color ? You've come up with some strange recipe's Sorry bud. couldn't resist. Where is @WHX?? when you need some more pokin. 2 Share this post Link to post Share on other sites
ebinmaine 67,329 #6 Posted December 2, 2022 1 hour ago, JCM said: ? You've come up with some strange recipe's At least, to my benefit, the TWO horses I have ever had painted were red white and blue and a color that contains RED. Wait till you see the Automatic I'm doing right now. You boys are going to fall head over heels for that one. Hell I might even redeem myself a little bit...... 1 2 Share this post Link to post Share on other sites
RandyLittrell 3,877 #7 Posted December 2, 2022 4 hours ago, ebinmaine said: Other than the obnoxious color that's cute as a button. I wonder what the safe weight capacity would be considering the mechanism is mounted in front of the front tire. Even if it's only a hundred or 200 lb it still would come in extremely handy. Really would have to make VERY sure of the rear ballast is appropriately distributed. The pic I didn't post shows a support running down to mid frame and I would be there is one that doesn't show in this side. I am sure the pics were just for show, he know doubt has ballast he puts on. Randy 1 Share this post Link to post Share on other sites
WHX?? 48,801 #8 Posted December 2, 2022 Is that oem JD? Kinda looks like it. But then again extensive use of hoses & tie wraps versus clamps maybe not? We were just having a discussion on single bucket cylinder. Note how it looks to bigger than should be. 4 hours ago, JCM said: Where is @WHX?? when you need some more pokin. 1 2 Share this post Link to post Share on other sites
ebinmaine 67,329 #9 Posted December 2, 2022 3 minutes ago, WHX?? said: Is that oem JD? Kinda looks like it. But then again extensive use of hoses & tie wraps versus clamps maybe not? We were just having a discussion on single bucket cylinder. Note how it looks to bigger than should be. Ever notice that when someone says "no comment", what they really mean is "1000 comments"?? 😂😂 2 Share this post Link to post Share on other sites
JCM 9,130 #10 Posted December 2, 2022 332 is a diesel and the loader used on those back then was a 44 I believe. Not sure who built that loader @WHX?? 1 Share this post Link to post Share on other sites
WHX?? 48,801 #11 Posted December 3, 2022 17 minutes ago, ebinmaine said: Ever notice that when someone says "no comment", what they really mean is "1000 comments"?? 😂😂 Yep... saving my comments on color choices 'till both barrels loaded. 18 minutes ago, JCM said: 332 is a diesel and the loader used on those back then was a 44 I believe. Not sure who built that loader @WHX?? How is it you know anything about JDs Plunge... 1 1 Share this post Link to post Share on other sites
Handy Don 12,177 #12 Posted December 3, 2022 The 332 has a very heavy and wide frame. With the links to the midframe, I'm sure it lifts 200-300 pretty comfortably. 1 Share this post Link to post Share on other sites
kpinnc 11,938 #13 Posted December 4, 2022 Interesting design. I wish we could see the rear where it connects to the frame. Definitely like how compact it is. 1 Share this post Link to post Share on other sites