LFDRET 21 #1 Posted November 18, 2022 Will a snow blower that fits a C-160 fit a C-195 1 Share this post Link to post Share on other sites
8ntruck 6,993 #2 Posted November 18, 2022 Good chance that it will. What is the model number on the snowthrower? Once you have that, you can look it up in the interchange chart that is posted as a sticky in this section of the forum. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,037 #3 Posted November 18, 2022 C-195 Other C's They may be the same except for the lift tube and flag. 2 Share this post Link to post Share on other sites
Alex175 784 #4 Posted November 18, 2022 (edited) 11 hours ago, gwest_ca said: They may be the same except for the lift tube and flag. Exactly what Garry said, you can use the snowblowers on the C-195, but there is a different length lift rod. For the C-195 the rod isn't separate from the flag, they are all one unit, welded together. Additionally it requires a different size belt, but I ran a tall chute blower on my C-195 last year and it worked fantastically, plenty of power to launch that snow. I only wish that the two stage blowers could be properly mounted on the C series. Edited November 18, 2022 by Alex175 added photo 1 Share this post Link to post Share on other sites
mrc 812 #5 Posted November 24, 2022 hello alex175, years ago wh used bercomac (berco) 2 stage blowers. these are made in canada. this was before the toro buy out. is it all 'C' series or just the blackhoods that have issues? thank you mike in mass Share this post Link to post Share on other sites
