Dennis C. 142 #1 Posted November 6, 2022 Parts and repair still available for the Eaton trans on my 1996 314 H? Share this post Link to post Share on other sites
ebinmaine 67,483 #2 Posted November 6, 2022 There are plenty of that vintage around so repairs and maintenance should be fine. A to Z Tractor in PA would likely have a good stock of used parts. Is there a particular concern? 3 Share this post Link to post Share on other sites
Dennis C. 142 #4 Posted November 7, 2022 ebinmaine. Actually the tractor is in extremely good condition with only 560 hours on it. Looks almost new but the previous owner thought he was a mechanic and destroyed the engine. I have since had that rebuilt with a newer block. The only reason i asked about the transmission was out of concern I may need some repair down the rode. So far the trans operates as it should. Thanks for responding. 2 Share this post Link to post Share on other sites
Dennis C. 142 #5 Posted November 7, 2022 Now that you mention it. My tractor almost comes to a stop when I make a turn. It slows down very noticeably and returns to normal speed once the turn is completed. I've checked the motion friction on the control lever and it has enough drag. Thoughts? Share this post Link to post Share on other sites
ebinmaine 67,483 #6 Posted November 7, 2022 I won't be much help on a newer hydro. Hopefully somebody else can chime in... 1 Share this post Link to post Share on other sites
oldlineman 1,481 #7 Posted November 7, 2022 I believe some models had a speed reducing option when turning, not sure if this is one of them. I have nothing that new. Bob 1 1 Share this post Link to post Share on other sites
