ebinmaine 67,435 #1 Posted November 2, 2022 I got some VERY well built tables and carts from my work yesterday. In past years our store was responsible for building window casing extension jams for some of the windows we sold along with occasionally shutters. Also, a lot of warranty repairs were done out of our branch. A decade or two ago a guy built a 4 x 8 ft table with 4x4 PT legs and 3/4 vinyl board solid one-piece top. Also, a router table constructed the same way, perhaps 30x40 inches? The other two things are rolling carts slightly larger than the router table that were used to hold the pieces during assembly. None of these have been used in several years and inventory is coming up so we're reorganizing a little as we do every year. Well, out they go!!! I happened to be in the right place at the right time and asked about them. I've been wanting a real live router table for eons. The rolling carts will be rebuilt slightly and repurposed. Perhaps one is a table saw holder? The big table will be fortified a bit more and used as a workspace for whatever the BBT is uptah. 17 4 1 Share this post Link to post Share on other sites
EB-80/8inPA 1,641 #2 Posted November 2, 2022 At this rate, your new barn might already be too small. 1 7 Share this post Link to post Share on other sites
ebinmaine 67,435 #3 Posted November 2, 2022 3 minutes ago, EB-80/8inPA said: At this rate, your new barn might already be too small. Might need an addition to hold these pieces 1 Share this post Link to post Share on other sites
Pullstart 62,838 #4 Posted November 2, 2022 Nice! We made a router table out of a desk a couple years back. It has been quite useful, off and on! 4 Share this post Link to post Share on other sites
953 nut 55,194 #5 Posted November 2, 2022 With today's lumber cost any one of those would set you back $ 100.00 or more. 4 Share this post Link to post Share on other sites
