Jump to content
Joe Shmo

1964 1054 needs help

Recommended Posts

Joe Shmo

Gas went bad in tank and gummed up the strainer bowl under tank.  Trying to clean bowl and wondering how and what would work best.  Thanks for any suggestions.  

  • Like 1

Share this post


Link to post
Share on other sites
 
oliver2-44

:text-welcomeconfetti:

Water based cleaners such as Purple Power may work.  I like to soak in lacquer thinner, in a closed container or a well ventilated (outside) area.  Carburetor Cleaner or Brake Kleen in a spray can should also work.

 

:wwp:

  • Like 3

Share this post


Link to post
Share on other sites
 
Pullstart

I have found some pretty decent $1 degreaser (with spray bottles!) at Dollar General.  It sure wouldn’t hurt to dump an entire bottle in straight and agitate the tank somehow.  If you have a helper to drag the dead tractor around on some rough terrain, that might help.

 

FYI, you need to drop the transmission to get the gas tank out on that model as far as I’m aware.  The best job you can clean it in the tractor, might be worth it.

  • Like 1

Share this post


Link to post
Share on other sites
 
daveoman1966

Use Lacquer Thinner.  It is a solvent for everything 'cept Egyptian Mummification. 

  • Like 3
  • Haha 1

Share this post


Link to post
Share on other sites
 
Retired Wrencher

:WRS: Good luck with the tractor.

Share this post


Link to post
Share on other sites
 
953 nut
 
ebinmaine
9 hours ago, daveoman1966 said:

 a solvent for everything 'cept Egyptian Mummification. 

You've proven this? 

Share this post


Link to post
Share on other sites
 
Lane Ranger
 
Joe Shmo

Thanks for the suggestions.  Posted some pictures in the introduction forum if interested.

Share this post


Link to post
Share on other sites
 
Joe Shmo

Should I be able to blow through the top, where it screws into tank, of the sediment bowl/strainer.  I would think you could but I am not too sure.  Seems plugged up to me.  She will run on a “fuel IV “😀

Share this post


Link to post
Share on other sites
 
953 nut
 
wallfish
6 hours ago, Joe Shmo said:

Should I be able to blow through the top, where it screws into tank, of the sediment bowl/strainer.  I would think you could but I am not too sure.  Seems plugged up to me.  She will run on a “fuel IV “😀

Yes, it should pass air when the valve is opened.

 

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...