Duramax7man7 506 #1 Posted October 18, 2022 Hey gang. Long time... Was wondering if anyone has modded or has seen a modded 200 Series Tractor Snow Thrower for a 300-500 Series Tractor? SO fitting a 200 series thrower to fit a 300-500 Series? 1 Share this post Link to post Share on other sites
squonk 41,040 #2 Posted October 18, 2022 Anything can be done with enough metal and a welder. I had a horizontal shaft Allis Chalmers snow blower mounted on a vertical shaft 200 series 10 HP Wheel Horse 1 Share this post Link to post Share on other sites
Pullstart 62,812 #3 Posted October 18, 2022 Using any of the 20 power take off methods in This thread here, anything is possible 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,037 #4 Posted October 19, 2022 It should be easier to modify a 200 snowthrower to a 300 than a 300 to a 200. Longer drive shaft and an extra bearing. 1 Share this post Link to post Share on other sites
Duramax7man7 506 #5 Posted October 19, 2022 Thanks for the replies. Anyone that has actually done it, please chime in... 1 Share this post Link to post Share on other sites
