davidfindlay 49 #1 Posted October 9, 2022 Can anyone recommend replacement hoses for the mower deck to the impeller and from the impeller to the trailer? Mine are sturdy but not very flexible and tend to pop out of the trailer on a change of gradient. I’d love clear ones to better see when they get blocked but something a little more flexible than the current ones would be great. Also if anyone has a good solution for covering the end of the deck attachment to make it mulch I’d love to know. Share this post Link to post Share on other sites
squonk 41,040 #2 Posted October 9, 2022 I would try McMaster Carr https://www.mcmaster.com/ 1 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,297 #3 Posted October 9, 2022 I purchased some hose from a woodworking supplier some years ago. They were designed to sawdust removal. They worked find. You may want to try D R ( they sell left vac etc. ) 1 1 Share this post Link to post Share on other sites
953 nut 55,120 #4 Posted October 9, 2022 https://www.harborfreight.com/4-inch-x-10-ft-transparent-dust-collector-hose-96478.html?utm_source=google&utm_medium=cpc&utm_campaign=12144821732&campaignid=12144821732&utm_content=113736761421&adsetid=113736761421&product=96478&store=&gclid=Cj0KCQjw4omaBhDqARIsADXULuXucCSZn-YxDOFWaJZGxhFmAVcMiT5n8fc_HEwNhXc9TAUUT2fzxz4aAhQPEALw_wcB 2 Share this post Link to post Share on other sites
daveoman1966 3,745 #5 Posted October 10, 2022 I have a 4" diameter fexible Stainless Steel hose coming off of a fuel oil furnace in my garage. Quite flexible and also won't rot out. May be a pricey alternative and I don't recall what I paid for the stuff. 1 Share this post Link to post Share on other sites
Pullstart 62,812 #6 Posted October 10, 2022 Not knowing your dimensions, is it assumed that these are all 4” tubes? Share this post Link to post Share on other sites
davidfindlay 49 #7 Posted October 10, 2022 7 minutes ago, Pullstart said: Not knowing your dimensions, is it assumed that these are all 4” tubes? ID is about 5.75”. Share this post Link to post Share on other sites
Pullstart 62,812 #8 Posted October 10, 2022 And how long? I have a 6” piece of stainless steel chimney sleeve… Share this post Link to post Share on other sites
davidfindlay 49 #9 Posted October 10, 2022 59 minutes ago, Pullstart said: And how long? I have a 6” piece of stainless steel chimney sleeve… 48” for deck to impeller 32” for impeller to trailer Share this post Link to post Share on other sites
Pullstart 62,812 #10 Posted October 11, 2022 Oh. I don’t think I have enough for two pieces… Share this post Link to post Share on other sites
davidfindlay 49 #11 Posted October 11, 2022 11 minutes ago, Pullstart said: Oh. I don’t think I have enough for two pieces… No worries, I appreciate the thought! 1 Share this post Link to post Share on other sites
