peter lena 8,589 #1 Posted September 28, 2022 had a W/H # 102741 mule belt getting thin , just starting the buzzing state , went to tractor supply , hopefully for a replacement , got the HUSKEE 1/2 " X 95 " ARAMID , STOCK # 44-62042, install was easy , also have a solid inch back thread gain reserve on the mule adjustment knob. best part is the thread screw adjustment , is on the strong side of gain , when you get those pulleys swinging out at angle you are past the strong support stage . re lubed all related movement areas , spin up was solid smooth quiet on deck . have other aramid belts on my stuff , lots of hours , no issues , belt cost $ 22.32 with tax . good price , pete 3 Share this post Link to post Share on other sites
peter lena 8,589 #2 Posted September 28, 2022 @The Freightliner Guy . @elcamino/wheelhorse , also have those on my snow blower idler pully drive set up , regreased pulleys and a stiffer drive spring , drive engagement is very solid . belts have not given me any problems . pete 2 Share this post Link to post Share on other sites
