Eyeball this one ...

[WHX?? 48,828]

Possible score here. Yah Techy I know. Looks to be all orginal and complete  and fairly decent shape but what do I know.  500 clams OBO seller says.  Crap ...hang tight I gotta go get some pics off a email....

Edited September 24, 2022 by WHX??

[rjg854 11,378]

[WHX?? 48,828]

Sorry Randy... didn't mean to get you all worked up... 

100% chance I'll go look at 50/50 on will it come home. Like  Dan said no room at the inn tho and would kill me to see it set outside. Maybe I'll low ball the guy or play pawn stars with him. Kinda diggin the plow..

EB come finance me a another barn...  Heard tell the banks come to you when they need money....

Edited September 25, 2022 by WHX??

[squonk 41,142]

I thought the early frt. Eng round hoods came with the foot trip side shifter plow?

[WHX?? 48,828]

Got me Squonky that's why I'm asking pros for help...

[Pullstart 62,905]

3 hours ago, squonk said:

I thought the early frt. Eng round hoods came with the foot trip side shifter plow?

Huh what?  Pics please?

[ri702bill 8,327]

9 hours ago, squonk said:

I thought the early frt. Eng round hoods came with the foot trip side shifter plow?

They did - that appears to be a mid 1960's 42 inch plow, like on Dad's 702.

Is that really a 502??? Maybe a 552? I see an electric starter and battery like a 552, but no ammeter - it has the correct 502 kill switch in the 2" round plug in the dash.....

Maybe the battery is only there for the lights??

[953 nut 55,290]

Comes complete with a spittoon in case you take up chewin or dippin!                 

[squonk 41,142]

7 hours ago, Pullstart said:

Huh what?  Pics please?

[ri702bill 8,327]

8 hours ago, Pullstart said:

Huh what?  Pics please?

@Pullstart, @squonk Notice too how the plow mounts in the rear - not with a quick attach rear axle bracket, but rather loosely bolted to the lower holes in the sides of the "F" plate gussets...

Saw one of these locally on a bought new in 1963 model 603 tractor that was a dedicated plow tractor all its life...

[WHX?? 48,828]

Was wondering what that dash switch was all about. Maybe a repo then with that motor so not an orginal. So that means a guy could drop a 161 or a 181 in it without feeling guilty about messing up an orginal. 

Thanks Bill... 

[wallfish 17,011]

 

1 hour ago, squonk said:

Don't remember ever seeing this type before. I've owned plenty of the old A frame type plows for the early short frame tractors over the years but all had the typical type pin release on the index handle like Jim's pic. Those type must be pretty rare

[wallfish 17,011]

8 minutes ago, WHX?? said:

Was wondering what that dash switch was all about. Maybe a repo then with that motor so not an orginal. So that means a guy could drop a 161 or a 181 in it without feeling guilty about messing up an orginal. 

Thanks Bill... 

Never ever felt guilty for upgrading one of those tractors to a Kohler engine. Actually felt pretty good to have them be able to start and run! LoL

[squonk 41,142]

37 minutes ago, wallfish said:

 

Don't remember ever seeing this type before. I've owned plenty of the old A frame type plows for the early short frame tractors over the years but all had the typical type pin release on the index handle like Jim's pic. Those type must be pretty rare

I saw one of them for sale on a 702 once. The rear axle brackets were bolted to the plow frame with a single bolt on each side and then had the std. 2 bolts and plate to connect it to the axle. Had the foot pedal tang thingy to release the angle sector and the little shifter and black knob to adj the angle. I didn't think it was a WH plow at first. I believe I've seen 3 in the wild now.

 

Maybe @Wild Bill in VA has some insight.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

[Pullstart 62,905]

1 hour ago, WHX?? said:

Was wondering what that dash switch was all about. Maybe a repo then with that motor so not an orginal. So that means a guy could drop a 161 or a 181 in it without feeling guilty about messing up an orginal. 

Thanks Bill... 

 

502 or 552, they’re all sweet!

 

 

[ri702bill 8,327]

1 hour ago, WHX?? said:

Was wondering what that dash switch was all about. Maybe a repo then with that motor so not an orginal. So that means a guy could drop a 161 or a 181 in it without feeling guilty about messing up an orginal. 

Thanks Bill... 

I don't think there are any repro dash plugs and ground switches - what you have does look like my 502. Am I seeing an ignition switch at the bottom of the hood stand - 552 would have one, 502 not.

You do have the correct 2 piece leak prone gas tank there found on the 502 and 552 - fixable if it leaks. 702 had the one piece aluminum tank and the removable bolt on cast iron dash.

[Lane Ranger 10,968]

8 hours ago, wallfish said:

 

Don't remember ever seeing this type before. I've owned plenty of the old A frame type plows for the early short frame tractors over the years but all had the typical type pin release on the index handle like Jim's pic. Those type must be pretty rare

this is the 1962.  BD-4262. Snowplow made for 702.   I have one.     
 

Here it is on my 854.   The right hand lever is nice and the pedal real eases the pivot point for the blade upfront. 
 

 

here is the manual:  

 

 

Edited September 25, 2022 by Lane Ranger

[Handy Don 12,233]

2 hours ago, Lane Ranger said:

this is the 1962.  BD-4262. Snowplow made for 702.   I have one.     

Here it is on my 854

That looks great. What sort of tire clearance do you have with the blade tilted?

[WHX?? 48,828]

Thanks fellas.. some good info and some good bargaining ammo. 

[oliver2-44 9,758]

On 9/25/2022 at 9:53 AM, ri702bill said:

I don't think there are any repro dash plugs 

A seller on the bay has been selling Hole Covers. They look identical to A 2” conduit hole cover. 

Edited September 27, 2022 by oliver2-44

[Jeff-C175 7,202]

12 hours ago, oliver2-44 said:

Hole Covets

 

"Though shalt not covet"

 

[Lane Ranger 10,968]

15 hours ago, Handy Don said:

That looks great. What sort of tire clearance do you have with the blade tilted?

 

The plow face clears fine Don.  Not a problem.

[Handy Don 12,233]

11 minutes ago, Lane Ranger said:

 

The plow face clears fine Don.  Not a problem.

I am definitely intrigued by the pedal pin release. Have no real need for a plow (not enough snow or other work). A grader, though, that might be useful (short frame style)