520-8 Wiring Repair

[Handy Don 12,217]

Just now, WHX?? said:

Wow and I thought I was a 520 hog.. I had five but give one to Dan just to share the misery. 

Might be mistaken EB but same tank across the 3 4 500s. Take a 520 tank with the sending unit and slide it under a 300 and add the gauge & appropriate wiring.  

Hey EB, just happen to have a tank with a sending unit (no gauge, though).

[ebinmaine 67,484]

2 minutes ago, WHX?? said:

Wow and I thought I was a 520 hog.. I had five but give one to Dan just to share the misery. 

Might be mistaken EB but same tank across the 3 4 500s. Take a 520 tank with the sending unit and slide it under a 300 and add the gauge & appropriate wiring.  

Neat.  

I have three 400 series tractors here. All have the gauge in the fuel cap on the tank. Didn't know the 520s had a separate gauge on the dash.

 

I'd like to find a universal one with a universal sending unit that I could wire up into Cinnamon Horse and also Colossus. Two very different size tanks though.

[Handy Don 12,217]

1 minute ago, ebinmaine said:

Neat.  

I have three 400 series tractors here. All have the gauge in the fuel cap on the tank. Didn't know the 520s had a separate gauge on the dash.

 

I'd like to find a universal one with a universal sending unit that I could wire up into Cinnamon Horse and also Colossus. Two very different size tanks though.

The sending units on the WH tanks fit into a separate opening on the tank. Nothing fancy, but the plastic around it was molded smooth so the gasket would seal properly.

A while back @Ed Kennell found a source for sending units of different sizes and with adjustments for different sending voltage ranges but I can't find the thread just now. Gauges are about $25 new all over the net.

[Bow_Extreme 544]

51 minutes ago, WHX?? said:

Wow and I thought I was a 520 hog.. I had five but give one to Dan just to share the misery. 

Might be mistaken EB but same tank across the 3 4 500s. Take a 520 tank with the sending unit and slide it under a 300 and add the gauge & appropriate wiring.  

I might have a few….lol.

520-8

520HC

520 Power Steering Prototype

520H Custom

 

 

 

[ebinmaine 67,484]

2 minutes ago, Bow_Extreme said:

Power Steering Prototype

That's a cool one

[cleat 5,953]

2 hours ago, ebinmaine said:

Got any info on that?

I used a 520H fuel tank and gauge in my 312H.

 

Just had to add the appropriate wires to the harness and I mounted the gauge where the hourmeter was and installed a small hourmeter in an alternate location.

 

 

Here is the fuel gauge in the dash with angle rings so I can see it easier.

 

 

Here is the 520H fuel tank with sender unit. It fits the same as the original tank.

 

 

Here is the small hour meter.

 

Fuel gauge.pdf

 

This is the wiring diagram

 

 

This is the wire harness almost complete, just needs the last connectors installed.

 

[cleat 5,953]

2 hours ago, ebinmaine said:

Got any info on that?

I used a 520H fuel tank and gauge in my 312H.

 

Just had to add the appropriate wires to the harness and I mounted the gauge where the hourmeter was and installed a small hourmeter in an alternate location.

 

 

Here is the fuel gauge in the dash with angle rings so I can see it easier.

 

 

Here is the 520H fuel tank with sender unit. It fits the same as the original tank.

 

 

Here is the small hour meter.

 

Fuel gauge.pdf

 

This is the wiring diagram

 

 

This is the wire harness almost complete, just needs the last connectors installed.

 

[cleat 5,953]

2 hours ago, ebinmaine said:

Got any info on that?

I used a 520H fuel tank and gauge in my 312H.

 

Just had to add the appropriate wires to the harness and I mounted the gauge where the hourmeter was and installed a small hourmeter in an alternate location.

 

 

Here is the fuel gauge in the dash with angle rings so I can see it easier.

 

 

Here is the 520H fuel tank with sender unit. It fits the same as the original tank.

 

 

Here is the small hour meter.

 

Fuel gauge.pdf

 

This is the wiring diagram

 

 

This is the wire harness almost complete, just needs the last connectors installed.

 

[cleat 5,953]

Don't know why that was posted 3 times. Can a moderator delete the extra posts please.

[Ed Kennell 38,170]

5 hours ago, Handy Don said:

The sending units on the WH tanks fit into a separate opening on the tank. Nothing fancy, but the plastic around it was molded smooth so the gasket would seal properly.

A while back @Ed Kennell found a source for sending units of different sizes and with adjustments for different sending voltage ranges but I can't find the thread just now. Gauges are about $25 new all over the net.

I don't remember this Don.     But....now where are my glasses?

[ebinmaine 67,484]

35 minutes ago, Ed Kennell said:

I don't remember this Don.     But....now where are my glasses?

Check the top of your head. That's where mine usually are when I've lost them...... 

[Horse Newbie 7,069]

10 hours ago, Bow_Extreme said:

DT & DTP connectors

Can we get a pic of those ?

[Horse Newbie 7,069]

10 hours ago, squonk said:

wire nuts from Wheel Horse tractors

I can’t stand that ! 

[WHX?? 48,815]

11 minutes ago, Horse Newbie said:

I can’t stand that ! 

Guilty as charged... but only in a pinch to get her running so take it easy on those lashes with the worn out drive belt. 

Like @Achto I solder and shrink wrap all my stuff but I think he uses scotch locks too. Wraps them up with a roll of black tape... 

[ebinmaine 67,484]

34 minutes ago, WHX?? said:

scotch locks too. Wraps them up with a roll of black tape

I believe 1 roll cheap garbage black tape per 1 scotch lock is an acceptable ratio.  

[WHX?? 48,815]

37 minutes ago, ebinmaine said:

I believe 1 roll cheap garbage black tape per 1 scotch lock is an acceptable ratio.  

I believe yer on crack EB  you use them at tall...  

[ebinmaine 67,484]

11 minutes ago, WHX?? said:

I believe yer on crack EB  you use them at tall...  

Me Bear don't even own any scotch locks.  

[Handy Don 12,217]

4 hours ago, Ed Kennell said:

I don't remember this Don.     But....now where are my glasses?

Well I finally found the post and figured out why you don't remember, Ed.

It was in the fall of 2020 and it was Lynn who did this post.

My apologies for the confusion and thanks for the info @lynnmor!

[Ed Kennell 38,170]

45 minutes ago, Handy Don said:

it was Lynn who did this post.

You were close Lynn and I are neighbors.

[WHX?? 48,815]

12 hours ago, ebinmaine said:

Me Bear don't even own any scotch locks.  

I'll send ya a couple hundred... 

[ebinmaine 67,484]

1 minute ago, WHX?? said:

I'll send ya a couple hundred... 

Whoa whoa WHOA!!

 

Easy there big fella...

If I wanted something that didn't work right I would go buy a green tractor.  

[WHX?? 48,815]

Lol.. the correct response EB is "No thanks trying to quit" 

[Bow_Extreme 544]

On 9/21/2022 at 6:09 PM, Horse Newbie said:

Can we get a pic of those ?