Jump to content
clueless

1979 RD deck?

Recommended Posts

clueless

Anybody got the model number for the 36 rd deck for the C-121 can't seem to find it in the manual section, need the parts diagram.

Chris.

Share this post


Link to post
Share on other sites
 
Ed Kennell

Are you out there Garry?     @gwest_ca

Share this post


Link to post
Share on other sites
 
gwest_ca

Corrected the first reply - wrong deck size

 

The 1978 model was 85-36MR01

but you could have any of these

Mower DNA

1972 model 5-0620 replaced by

1973-1974 model 5-0621

1975 model 5-0622

1976 model 65-36XR01

1977 model 75-36XR01

1977 model 75-36XR02

1978 model 85-36MR01

1979 model 95-36MR00 (Blades up to this point have the 5/8" x 3/4" double-D center hole unless the spindle has been upgraded)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------

(These decks used blades with a 3/4" center hole)

1979 model 95-36MR01 replaced by

1980-1982 model 05-36MR01 - Last year for bearings with 3/4" ID

1983-84 model 05-36MR02 - First year for bearings with 17mm ID unless older spindles were updated.

1985 model 05-36MR03

1986-1990 model 05-36MR04

1991-1993 model 05-36MR05

1993-2006 model 78305

 

Note - 17mm is .669"

Share this post


Link to post
Share on other sites
 
clueless

Thank's Garry, the '78 and '79 C-121 had the cradle mount engines, just trying to find out if the mule drive belt was different because of the cradle.

Chris.

Share this post


Link to post
Share on other sites
 
clueless

So is the mule drive deck belt Toro 102741 and what size is it?

Share this post


Link to post
Share on other sites
 
gwest_ca

If you click on the fuzzy picture in the link above this is what you will see.

 

Fits B-Series and C-Series tractors
 

Drive belt 102607 (1/2" x 89.12") when used on medium frame 43-1/2" wheelbase tractors
1972 Commando 800 model 1-0110
1973 8hp 4-Speed model 1-0120
1974 B-80 4-Speed models 1-0140 and 1-0145
1974 B-100 Auto model 1-0510
1975 B-80 4-Speed model 1-0141
1975 B-100 Auto model 1-0511
 

Drive belt 102741 (1/2" x 96.6") for B-Series & C-Series tractors with 45-1/2" wheelbase (Gates replacement BladeRunner 6638BR 17/32" x 96.75")

 

Spindle belt 8411 (1/2" x 76.94")

Share this post


Link to post
Share on other sites
 
clueless
2 hours ago, gwest_ca said:

If you click on the fuzzy picture in the link above this is what you will see.

 

Fits B-Series and C-Series tractors
 

Drive belt 102607 (1/2" x 89.12") when used on medium frame 43-1/2" wheelbase tractors
1972 Commando 800 model 1-0110
1973 8hp 4-Speed model 1-0120
1974 B-80 4-Speed models 1-0140 and 1-0145
1974 B-100 Auto model 1-0510
1975 B-80 4-Speed model 1-0141
1975 B-100 Auto model 1-0511
 

Drive belt 102741 (1/2" x 96.6") for B-Series & C-Series tractors with 45-1/2" wheelbase (Gates replacement BladeRunner 6638BR 17/32" x 96.75")

 

Spindle belt 8411 (1/2" x 76.94")

:handgestures-thumbupright:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...