Morganic 22 #1 Posted September 17, 2022 Where’s the best place to get a replacement carburettor for a Kohler K301AS? Theres lot advertised on eBay but I’m told by collectors here in the UK that they’re rubbish - cheap but nasty. Where would I get a good replacement? Share this post Link to post Share on other sites
953 nut 55,324 #2 Posted September 17, 2022 (edited) Presuming yours has not been run over by a steam roller I would suggest rebuilding the one you have, the results will be much more satisfactory. Kits are only about $ 5.00 in the US on and the rebuild is easy to do. This site will give you more than you need to know on rebuilding the carter carbs found on http://gardentractorpullingtips.com/carbfuel.htm Edited September 17, 2022 by 953 nut 2 Share this post Link to post Share on other sites
Snoopy11 5,714 #3 Posted September 17, 2022 Isavetractors... expensive... but quality. Don 2 Share this post Link to post Share on other sites
EB-80/8inPA 1,655 #4 Posted September 17, 2022 3 hours ago, Snoopy11 said: Isavetractors... expensive... but quality. Don Agreed. Nothing but good luck with Norman’s stuff here. I think the prices only look expensive when compared to those being charged for the junk-o stuff. I really like that he’s making them in Maine! 1 Share this post Link to post Share on other sites
pfrederi 17,741 #5 Posted September 17, 2022 (edited) 48 minutes ago, EB-80/8inPA said: Agreed. Nothing but good luck with Norman’s stuff here. I think the prices only look expensive when compared to those being charged for the junk-o stuff. I really like that he’s making them in Maine! He does not make carbs... I think they come from Taiwan Also original poster is in England I do not know if IST shops overseas... Edited September 17, 2022 by pfrederi 2 Share this post Link to post Share on other sites
EB-80/8inPA 1,655 #6 Posted September 17, 2022 2 hours ago, pfrederi said: He does not make carbs... I think they come from Taiwan Also original poster is in England I do not know if IST shops overseas... Well that’s news; I thought they were. Oh, well, that’s one more disappointment to throw on the pile, I guess. They do work well wherever they come from. 1 Share this post Link to post Share on other sites
DZG 32 #7 Posted September 21, 2022 Do not fall for a cheap ebay carb. We bought one to put on our 48 farmall cub and i could never get it tuned right...ever. Either it would flood on low RPM or lean out when you were pulling it hard on the high end. Ended up rebuilding the stock carb and it runs like a top. Share this post Link to post Share on other sites
