Search the Community
Showing results for tags 'valve'.
Found 3 results
-
I borrowed this photos from a member here, but the hydraulic valve on my C-161 looks just like it. Are these "stack-able". Since this is made up of an inner and outer plate which are contain the hydraulic supply and return, are the valve bodies internally ported so that multiple valves can be stacked together?
-
Hi there, I'm new to the forum. I come from a family of tractor enthusiasts, but I am currently just looking for a dependable mower. I know very little about wheel horses, other than I was impressed by one I used when I was a teenager. I am hoping to get advice about a 520h in my area. I checked it out tonight in the dark. It is very clean, and appears to have been maintained by a careful old man (RIP). The son in law started it after I struggled with the choke. It was chilly out, and I thought I heard a little tick in the onan 20hp. I took it for a short ride. Everything works. Hydro deck lift, pto, gauges, lights all seem good. The 48" deck sounded different than I expected, but keep in mind I haven't used a riding mower for years. After the ride I idled it down and she purred without the tick I heard upon starting. I did a final walk around and noticed a little grease shining from the left transaxle. Right side looked clean and dry. I don't have a trailer, so I left it there until Thursday. I am a little concerned about the engine tick, the left transaxle grease, and the general reliability of all this hydro. I am not shopping for a collection piece, so I would rather go simple if the hydraulics are prone to problems. We agreed on $1,000 final price. Am I worrying too much about the (very quiet) engine tick and the transaxle grease? Thank you
-
bought a 520h used and all seems good but has random misfire when running, vac gauge drops from 10psi to 5psi and engine looses power. not sure were to start hoping no valve issue! only other issue is unit is very slow in reverse. new to the forum hope not a frequent question
