Search the Community
Showing results for tags 'model 79361'.
Found 1 result
-
Hi all you movers of snow, I have a Wheel horse 520 H 1996 Model 73501 and just reattached my model 79361 snowthrower on it and the belt is very loose. I had used the blower last season and it had performed great (it came with the blower already on) I removed it for mowing use and reattached a month ago with the same belt. Even with the belt on the inner/larger PTO pulley, the belt was so loose that it would barely turn the auger without engagement into snow and completely stopped in snow. the belt then came off and was damaged so that the steel cords started to protrude and I replaced the belt. (belt: # 116332) The new belt slips also and the symptoms are the same, even on the larger PTO sheave. The belt tension spring is mounted and functioning and as far as I can tell I have routed the belt correctly. I tried to visit pages that show images of this, but was not allowed to view the content?? Are there any additional ways to make the belt fit better? I'll post some key pictures of what it all looks like shortly When I removed the cover for the belt at the PTO I noticed that I had it on the smaller/outside sheave and moved it to the larger. this did tension the belt better and perhaps it will work. However I am concerned about the Belt guard that is situated between the 3 pulleys on the thrower- is it in the right position?
