Search the Community
Showing results for tags 'charger 12'.
Found 9 results
-
Hello gentleman, Problem: will not crank on its own, will crank with jump box—but still not fire Recent things I did prior to this issue: cleaned fuel filter, replaced battery cables, replaced cable from ignition to starter I have my test light out and am probing around. There is no power at ignition/magneto wire or the ignition/starter wire There is power everywhere else
-
Hi I recently got an old charger 12 that had been sitting in a friends backyard for at least 20 years. The engine spins over and the starter works but it has no spark, I’ve been looking online for some solutions but I can’t seem to find any other charger 12s with my ignition setup. It seems to have a sort CDI box but I’m not sure. Does anybody know how this works or any tips on how to test for where the problem is ?
-
A Trailer Full Of "Red Stuff" Followed Us Home Last Night
RJ Hamner posted a topic in Restorations, Modifications, & Customizations
We brought my next project home last night. I think I am going to need a BIGGER shed real soon- 6 replies
-
- 8
-
-
- charger 12
- snow blower
- (and 1 more)
-
1970 Charger 12 Limited travel with the hydro lever
RJ Hamner posted a topic in Transmissions and transaxles
It acts like the lever has limited travel and doesn't go far enough to go into reverse. Something binding? Bent? The tractor showed signs that it had a rollover sometime in its life. Right front axle was welded along with some of the steering parts. I have a 68 charger (for parts) and swapped out the repaired parts with it. Possibily bent something there or the friction assy????? -
Converting "brakerless ign" to "braker ign" Question
RJ Hamner posted a topic in Wheel Horse Electrical
Restoring a Charger 12 with a breakerless ignition to breaker ignition. My theory is .....its only a matter of time before it goes bad so change it now while everything is apart. The question: There are three wires coming from the stator. Two go to the rectifier and one goes to the breakerless coil. What would be the proper way do do away with the third wire? Just cut it off? or ??? The book doesn't mention conversions. Thanks Bob -
I recently picked up a 1970 Charger 12 to bring back to life. The engine sounded real good and didn't smoke. The hydro didn't have any problems but the mower deck looked like it took a direct hit from a RPG. I had restored a 42" deck for my Raider so the deck was not a real problem. I also had a 1968 Charger 12 that the guy said I had to take when I picked up a 74 C-120 (I wanted the engine for a spare) Now I had a "donor" for the 1970Charger In the process of taking the 70 Charger down to the frame I found that a mouse had made a nest on the box for the motion lever and associated parts. I found nuts, a fair amount of bedding material and what was left of the mouse. As I started to put everything back together I needed a part from the 68. When I took the cover off - this is what I found. This guy worked REALLY hard building a nice warm place to spend the winter My Charger project despite a setback or two is coming along.....one piece at a time
-
Piece build a horse (continued from the electric forum)
LaurenJo posted a topic in Wheel Horse Tractors
Hi all. I'm new to the site I just discovered it. Quick history my dad and I wanted a horse for a long time. And about 8 years ago I found one and we bought it. Sadly he passed shortly after. In the process I had to sell the tractor because I had no way to get it to Texas. Well I am finding them impossible to find so I am wanting to "piece build" one and use my dads old Wisconsin as a power plant. (Only seems fitting). Any ideas on how and where to find the parts with shipping would be helpful. -
Nothing a little power wash doesn't make look better
Lane Huls posted a topic in Wheel Horse Tractors
Picked this up last night. Another 4 to grab yet this week! -
Plowed snow again today...It never ceases to amaze me how much these lil tractors do. The 18 Auto is down again...yeah I know...Imagine that...lol.... So Jebs Lil Charger 12 as he calls it has been pulling plow duty with its 42" blade. Heres a vid or 2 of it working and one from 6 months ago of it working at something a bit different around the farm.....
- 20 replies
-
- 6
-
-
- charger 12
- snow plowing
- (and 1 more)
