Search the Community
Showing results for tags 'brake'.
Found 3 results
-
Working on: 1986 Wheel Horse 312-A, Model 21-12KE02, 42" Deck Model 05-42MR04 Hello All, Well, the parking brake on this one stopped working, and after removing the shift plate it was clear that the pawl was no longer reaching any of the teeth on the bell crank. So I figured I needed to adjust the travel on the rod that accentuates the squeeze on the brake lining. It's not perfectly clear to me where the adjust point is, but I think it is the bolt-nut-spring assembly as shown on the pictures attached. Now, if that is the bolt I need to put some clockwise turns on to get this done, the question becomes how can I get a pair of 9/16" wrenches or sockets in there to make the turns. I pretzeled myself in several ways to get tools on both ends many ways with no luck. All comments very much appreciated. I'm using these diagrams: www.partstree.com/models/21-12ke01-312-a-toro-garden-tractor-1986/index.html The first picture is taken from the right side inward toward the assembly. The second is taken with me on my back looking up.
-
Hey guys, my wheelhorse c81 got a new transmission last year and now it’s grinding when I drive. First thing the brake pulley is on a higher shaft and doesn’t work with the c81 brake rod and hardware. Second the bearing behind the intake pulleyhas fallen out, which I assume is the grinding sound. Is there a way I can fix it without taking the whole transmission apart? I don’t have enough knowledge to do that kind of repair. Thanks so much -Shea
-
Ok, so I've found out just where the oil is leaving the transmission on my C120 8 speed from around 1974. Removed the brake "drum" and discovered a thin ring around the axle, is this part of the seal and can this be replaced without tearing the whole transmission? I found several posts & youtube videos about replacing axle seals, but none about the brake axle seal... Since this is the lowest axle, the oil-level is to low to determine if axle seals are bad too... I'm uncertain of what transmission I've got so trying to find the manual for it has been hard, someone who can help? Yanking the axel I can just about feel a play, is this OK, or should I replace the bearing too?
