Search the Community
Showing results for tags '656'.
Found 2 results
-
So I have been working on a 656 I picked up at the end of last year and I did my first ever motor rebuild by my self on it. However it seems that I have lots of play in the piston and some slop at TDC more then I should have. So to finish the year mowing I am thinking of doing a predator swap while I go over the engine again. I am sure several people have done this before and I have a spare mounting plat to make it work. I am wondering if anyone has any pictures of ones they have done for help along the way. I know I will need a adapter to use the factory pulley and I don't want to destroy any of the sheetmetal since it is in good shape. I will keep you posted as I go along and eventually when I get the hh60 back together correctly to re install.
-
So I've bought many wheel horses, either they were complete to begin with, or they always stayed a bare tractor, etc. Today I made my first few passes with this 656 I recently got. Newer motor, and the deck that came with my Raider 9. Only thing I had to do was change the deck drive pulley from the larger raider 9 pulley, to the small near 1:1 pulley from the deck I have for my other 656. It's seen the torch unfortunately... but it had the exact pulley I needed. With a trip to the hardware store for a belt, I give you! Tire chains will come off for mowing of course.
