Leaderboard

I have wanted to make this post for the past ten months; today I drove a Wheel Horse for the first time since my stroke! My wife was a bit apprehensive about the whole thing and I wasn't even sure I could get on the 310-8; but I did and it felt SOOOOOO GOOOOOOD

Last December I had a vision on a color scheme of a satin black base with gloss accents in mind . So I went into my parts inventory grabbed a frame, and just started building . 1955 /56 hood on a 1958 tractor .

Yesterday I came home to find that my son in law had power washed a few of my tractors and put them on display! He brought his C-141 automatic over for a service and decided it needed to be cleaned up, so while he had the power washer out he cleaned up a few more. I have to say not knowing this was going to happen and coming home to see it did put a smile on my face! Since I know you guys like pictures as much as me, here you go.

I have been working on this since last year with a failed attempt because of cheap over the big pond rebuild kit. Want to give BIG thanks to @Docwheelhorse. For picking up this engine for me in January. It was a partial 856. Yes it has been that long. I had to switch over parts from the bad engine to this one witch is a vacuum engine being my first. Been a long good day out side in the sun. I hope you enjoy the picks and one Video. IMG_1467.mov

Trina's daughter had a baby boy today!! His name is Jaxon. Trina's been at the birthing place since yesterday evening. I'm told both new mom and new kid are doing well.

I had a Kohler #30 carb for my own C160-8 Cinnamon Horse on the bench today. This one's been soaking in the lacquer thinner for several weeks along with quite a few sessions in the ultrasonic cleaner. Here's a couple "before" pics. I use a combination of the above soak & ultrasonic cleaner intermixed with wire brushing by hand and machine. VERY.... CAREFUL.... USAGE.... of the machine spun brush. I also use a small pick and/or screwdriver and/or whatever's to hand for cleaning the grit and muck from orifices and corners. After the greatest part of the grime is gone I use a series of drills in the Dremel tool to bore a 1/8" hole in the welch plug on the side. Pop that out with whatever levering tool is close and works. More cleaning. More scraping. More brushing. Repeat. Repeat. Intermix as needed. Be sure to get in the area behind the welch plug and clean carefully. Also clean the tiny holes the feed fuel to the main bore. I use a tiny drill bit. Carefully. All the small pieces also need de-grubbing and anti tarnish treatment. I use a 3-48 tap to clean the threads of all 4 holes from the throttle and choke shafts. Once the body is clean.. I start reassembly. Here's the complete exploded parts assortment sans the 3/8" welch plug I forgot to set there. Welch plug hole shown empty. Plug setting in but not driven/flattened. Post flatten. I use the bit that's on the carb to indent the plug. Anything roundish and 1/4" or so diameter can be used. The larger bar in my hand is the "hammer/ hammah". Procedure for driving in the upper throttle shaft bore repair washer is similar. One of two in place. Both set in. Here's a closeup. You can see the two washers stacked and stuffed. Now I move to installing the throttle and choke shafts and blades. I use Blue Loctite. Brand name only. Four new screws. These are usually 3-48. Just the tiniest little dab of Loctite on each screw. Get the screws in place loosely then verify proper movement and placement of the blades. Each blade will usually need a little coaxing to set just right. Once that's satisfactory, tighten the screws. Now I install the 3 exterior screws. 1. Idle speed control. Small silver colored one. I always start high and adjust the RPM down later. 2. Upper RPM mixture. Coincidentally that's also the uppermost positioned screw. 3. Low RPM or idle air mixture screw. Be sure to set the above screws to the factory settings before starting the engine. The fuel inlet seat is threaded in next. I have a special nut driver I've modified by grinding down the circumference so it fits in the limited space. Drop the needle in and slide the float pin through. Check the adjustment. I set floats for these carbs about parallel with the body. Install the bowl gasket, then the fuel baffle. Center the bowl. Install the gasket and bowl retaining nut. Snug that up well but use caution to not overtighten particularly on original aluminum bowls. I most often replace the bowl with a Briggs and Stratton steel bowl. The older aluminum bowls are almost always crushed and deformed around the bolt hole. A few more pictures as completed.

Last night I was plowing snow with my C-145. 25 degrees out, was dressed warm, had my heated gloves on and a smile on my face. Life was pretty good !! Then all of a sudden the engine stalled just like I had turned off the key. . Pushed the old girl in the shop for some diagnostics. Found that I had no spark. Multi meter showed that I was getting "+" power to the coil but no "-". Down side - points were not making a good contact. Up side - No need to buy a new solid state coil, or a new CDI box. Nor did I have to wait for said parts to arrive or wait till morning to take a drive to get new parts. Instead a quick cleaning of the points with some 1200 grit sand paper and I was back in business. $0 repair and only 15min down time.

I bought these From @Darb1964 when I picked up the 1067. He had one and half sets. So I thought It is a nice day let’s put them on. This my Garage Queen never sees rain snow or anything else. This is what started me on Start/Gen tractors. All was my favorite model to have a close second was the TEN because at one time I had a few. I hope you enjoy the picks.

First and foremost I have to thank @Handy Don and @Bill D And say it was great to see Don & meet Bill. The BBT and I took a nice road trip this weekend. Saturday was spent mostly on the road with two primary stops. One was to pick up all the stuff. The other was to visit my mom and help her out with some chores. Here's a few pics of what we got...

We were able to spend the beautiful Sunday showing off a few of the round hoods. It’s always a great time making memories. We were even lucky enough to bring home best and show garden tractor with the 702. They boys and I put a lot of work into it last winter and it payed off.

Trina has done it again! The 2025 RedSquare calendar is available for download!

...and the rest is history. I'm so glad that back in November of 2009, the day before Thanksgiving, I was looking for a plastic dash for my 1977 B-100. I stumbled upon this site and the rest is history. So many friendships have been created just for the sake of finding a new dash. Today, the day before Thanksgiving 15 years later, I am truly thankful to have found RedSquare. 🦃

Well, she is finally tall enough to reach the pedals. Been after me for a few years to let her drive. Today was the day and she was happy! Used half a tank of gas driving around.

Our garden is now heading into its 3rd season. Creating a usable garden space here in the New England mountains is an extreme challenge involving a lot of extra work in comparison to most areas of the country. The entire region was once covered by ice over a mile thick. When the glaciers departed, the mountains were destroyed and tremendous rock waste fields left behind. We all joke about having rocks and stones in the soil. Here, it's a little (seriously little) soil.. in with the rocks. Over the last several years we cleared an area of forest. 3+ years ago we had an excavator come in to clear the ground surface and make it somewhat level. After that we added 14+ yards of loam, all by hand, tractors and small trailers, load by load, moved a couple hundred feet from the driveway to the garden. Since then we've been picking out rocks sticks etc using an 856 tractor with the ripper or by hand. @Handy Don and I have texted more than once about the possibilities involving the use of a single tooth ripper in our garden area to pop out the rocks sticks roots etc as they rise every year from the frost. In the future I would like to be able to use a rototiller but for now there's too many rocks and sticks. It seems the ripper is a feasible solution for the time being. This weekend we used my heavier 1974 C160-8 Cinnamon Horse for the ripper work. Wanting to be conservative at the beginning, I started poking into the soil about 2" and immediately realized that could be a little deeper. I tried a 4" cut. That was the ticket. I worked back n forth at many angles. Started at the fence all the way around. Pulled every which way but loose. We learned that the pulled materials really have a tendency to stack up towards the middle of the area, logically. We also learned that we could likely use 2 ripper teeth. Maybe 3 (??) 3 might be too much. (With only one tooth there were multiple occasions where the tractor was "high centered" on rocks.) Some of those rocks were pulled out. At least 2 or 3 are too big.

As of February I'm officially an "empty nester". After a long search my son & his fiance' finally found a house that fit their needs. He had mentioned to to his Mother that "I think I'm going to need a Wheel Horse to mow the lawn", her reply was "I think your Dad can spare one". LOL. So I'm starting him out on the same model & deck I started out on in 1979, one of my C-81's with a 36" RD deck. I've had her ready to go for him for a while now & since the trailer was stiil hooked up from @Pullstart's plowday on Saturday, I decided Sunday was the day. All I can say is this was one of the greatest weekends of my life that I'll always rememember. Loaded up Delivered And yes, I'll give him a mule drive with a knob on it.

My new shed landed today! 10x20 in Sage Green, two double doors and two lofts. Will easily hold 6 tractors with room to walk around them, maybe more if I jam em in.

Figured it was time I start a post on here documenting my addiction! Here are two of my favorites

Just did a refresh on this. It will be put to work immediately.

Following my stroke my wife had to assume the duties I had always done in addition to her regular tasks. At first I was very frustrated by the fact that some things weren't being done the right way (read that as being done MY WAY). Within a few weeks I began to mellow and have adopted the belief that most of the things we do differently aren't so important after all. Showing mutual respect and loving each other is all that matters. I am now able to do most of the tasks my wife took over but I do some of them her way because I never understood how MY WAY bugged her so much. I never balanced the check book to the penny, I always rounded up or down when entering payments (drove her crazy) and I would always sort the recycles as they were taken to the garage, now we just hold of until the day we make a run to the drop-off center, no big deal. I have become a bit more mellow and appreciative of what I have left rather than becoming frustrated with the loss of what I had. I didn't realize how I had become "that old man", glad to say he is gone.

Old technology is the best if you have a person with an old soul around to make it work.

This one sitting in a field rotting away. So I rescued it. Tractor heavy and already have a 856 that needs love and I can't seem to give away. Saw it at a show several weeks ago and it was sitting there crying save me save me. I jokingly offered the owner a frankie for it and much to my surprise he took it. Motor was locked up so pulled it back to camp for a look see. @Achto @Wild Bill 633 and I commenced to wrenching to find out the motor is free but the SG is tight. Got it loosened up and messed with the points. Exhaust valve stuck open ... pop the head and free that up. Fired right off and drives. Service motor and seller says he has the original I could have but knowing him doubt I'll see it. Four year old Battery was stone cold dead... not a volt in it. Threw it on a charger and it did take a charge and seems to be holding it. Surprise surprise. Tires are abit needy but nothing serious. Best part everything is there, original cigar lighter woo hoo, and fairly unmolested. On the splash pad ready for a bath... sheet metal really straight. Seat & hitch worth the price of admission...

Trina wants all you people to know that she really enjoys the process of making up this calendar.

Finally completed my C-175 restoration tonight, when it’s light out I’ll take it outside for some better pictures. I’m super happy with the way it turned out and really have to thank my brother for all his help! I will be bringing it to the show as it is this year’s featured tractor.

Today's menu - Get this baby ready to light the fire. In order to do this I needed to have "dead man" throttle control. My plan is to turn the brake peddle into the gas peddle. Gathered the basic parts to make this happen. Starting with a piece of pipe that I bought for some reason. Guess this must of been the reason. I did not think that I would be able to weld to the cast metal that the peddle is made of very well, so the piece of pipe gave me some thing to weld to. I cut the threaded ends off from the pipe and the cut it length wise so that it would fit the curve of the brake peddle. Then cut the rest of the parts to make this into a gas peddle. Next up, burn these parts together. Drilled and tapped the peddle so that the assembly could be bolted in place. 2 more pieces required to make this work, a bracket to hold the throttle cable, and a bracket for a positive stop. All three completed. Gave all these parts a quick squirt with some flat black to keep from rusting. Adjustable wide open positive stop installed. Throttle cable holder and foot peddle bracket installed, with a return spring for the peddle. Also installed a return spring on the engine side of the throttle. I think the weed eater piston shift knob turned out well. With these parts installed it was time to light the fire. Good news!! It fired right up. Runs great and runs through all the gears well, butt... the strait pipe is loud and and um, loud!!! A few shots of it out in the sun light. Only thing left now is the fire suppression system "fire extinguisher" and scale it out to get the weight dialed in.

Big Thanks To, @Vinylguy for helping me out with this custom decal. Thank You, Sir! My part doesn’t do this justice…lol. I need to do this more often.

but I never pass on a free one. Member by the handle of @Mat84 had one listed in the classifieds abit ago. Saw it and figured someone should here should get it. So a 4 hour trip to the twin cities was in order. He was only a hour north of @Shynon so @Achto and I set out yesterday to grace him with our presence too. 'Sides I had a 867 to get to him. She ain't exactly peaches n cream. Motor is tight but we think it has potential. I gave him a buck for it... traditional with Dan and I. Back story is the PO pulled it out of weeds up to the motor hoping to project it. Lady friend came up pregnant so his priorities somewhat changed. Understandable. Told him doctors finally figured out what causes that. Said it had a deck that was roached and he scrapped it. So I thought I would push it out in the back pasture and deal with it later. Dan says I got projects to finish. I got a serious problem so it went into the shop. Good golly Miss Molly whose idea was this anyway? After abit of cleaning motor freed right up... bonus... bore doesn’t look too shabby.

Today in Lower Bavaria

Well I finished this 1067 last week. She is a good worker now. went thru it front to back. I hope you enjoy the picks.

I hope, I hope, I really hope, this tractor and I stay out of the bumps and bruises thread. @pfrederi offered it up for sale for $150 and I quick nabbed it! One of the rules to tractor buying is never tell how much. Well, I don’t believe this will ever go far from my possession , so I don’t mind sharing that info. The electric over hydraulic pump on the front and gravity drop have quickly grown on me. I bet I’ve got 3 or 4 hours on this thing since unloading already! It’s a beast! When we were talking about the model number, 753, seven fifty me quickly rolled off my tongue. It’s dangerous and wild. I found a cast “HOOSIER” seat for $25 from @wallfish’s pa Paul, and moved the pump forward enough to toss my spare hood on. The hood screw tabs on the gas tank are both ripped out, so I got creative with the rear hood hold downs, just some crushed 1/2” copper elbows drilled and bent a bit for zip tie action.

The Long Island Antique Power Association held its summer show and tractor pull this weekend. I went today (Sunday) with my son in law and brother. We took my Work Horse GT-1800, C-175 Automatic, and 420-LSE to the show. Here’s some pictures. Hope you enjoy!

I somehow managed to take a few pictures this year.

Pulled the plow off yesterday and stood it up ready to store. Came out this morning and found this!

Just last week I said no more tractors for me since I bought a big tool box for the garage. Well fast forward to today and I dragged 3 more home and a bunch of NOS parts. The guy has more and I plan on reaching back out to spend some more time digging to see what else he has. As for the tractors I wanted just one and my friend was buying the other. When we got there he offered us a 3rd and we had to pool some cash to get it. I plan on letting my buddy have the 3rd tractor. Definitely had fun picking in the upstairs of the guys garage where he had tons of parts for so many pieces of equipment, model A’s and so much more.

So a buddy that works at the auto parts store asks me last week if I'm still into wheel horse tractors. So naturally I say yea, what ya got? He says I have a raider 12 been sitting in the shed for 6 years and needs to go. He says I'll sell it to you for $200. Well I don't need another tractor but he only lives 4 blocks from me so I literally drug it home.......got it running too! 20240318_205914.mp4

Hello chaps, England calling.... I attempted to watch your Super Bowl "Football" game last night on the old televisual apparatus. The time delay is most awfully inconvenient, you chaps should really consider moving the kick off time to allow we English fellows to watch at a decent hour. Well. I must say I really can't understand why you insist on calling it football, there seemed to be very little use of the feet. Apart of course from propelling the players to the sidelines for a sit down every few minutes. Is that normal in your game? Would it not be better to make the chaps stay on the field just a tad longer? But I suppose they do need a little rest after all the Hoo Haa and dancing every time someone touches the ball, could you not just shake hands and give a hearty slap on the back like we folk do? And all that body armour and helmets! Goodness me those chaps are carrying so much clutter around with them. Over here we don't bother with all that malarkey. Just a bit of tape and a cloth scrum cap is enough to cover most eventualities. And this chap they call the quarter back? He seems to be quite important, making all the plays and such. Why does he have to have everything written on his arm? Surely he can remember a few bits and bobs. And he was off the field more than he was on it. Our chaps stay on for the full 80 minutes, unless less they break something or need a few stitches. All in all it was a pretty confusing game as far as I could see. What the blonde girl drinking lager had to do with it goodness knows, but her gentleman friend seemed rather upset at one point, maybe it was his beer, I don't know. I managed to watch the first quarter, or part of a half or some such. Really do you need to split a game of two halves down still further? Isn't it enough with all the first downs and 3rd and ten breaks in play? You chaps should have a squint at the six nations rugby tournament that is going on over here at the moment. You might pick up a few ideas. I have a few suggestions for your other little game, baseball is it? Perhaps some stumps and bowling the ball properly might make is just a tad more interesting. Anyway. Its been such fun chatting, but I have to go to the hospital now to have my tongue surgically removed from my cheek. Hope you fellows aren't too miffed at my critique of your little game. Ta ta for now old bean. Sir Nigel Molesworth Esq.

Got the herd out for the last time before most of them go to bed for the winter. Just a 520 and 48" deck is still in service to mulch leaves and the 520HC and blade is getting ready to plow snow. I did some work to a 416-8 for a fellow redsquare member so I put it in the lineup as well. Next year the Work Horse will be in the lineup as well I hope.

I did a 7 hour round trip today for this beautiful 500 hour 520. She runs awesome!

Happy Wednesday Afternoon, Wife and I took a roadtrip today, left house right around 6 am. Stopped at a nice fellas house by the name of Josh in Elizabethtown PA. He was acting as the middleman between Jason and owner of this restored C120. Josh also mentioned he runs the Lebanon PA winter show in February--he says its all indoors and 6 or 7 buildings. I may have to look into going... Then onto my GT2500 in Jacobus (York) PA... met an equally nice gentleman by the name of Keith Kauffman. Walk down to his garage and there sits a 1970 Plymouth 'Cuda 4 speed!!! Dang!!!! He recently just put a 408 stroker small block in it and has the original 340 on stand. On way out of town I looked up the dealer that had placed there dealer sticker on the Briggs shroud and found them. I stopped in and asked the gentleman if he'd like to come out and see one of his tractors head north. He came out and started talking... then took me for a short tour and told me about the list of every tractor they ever sold until Toro took over in 1986. What a cool old dealship... they didnt have any shift boots but I bought a 7473 8 speed drive belt to get him a few bucks. I told him about Redsquare and the big show and that he should look into going---the shop is about an hour away. Now its onto dinner with wife and then heading home tomorrow. Tony

Just a few. For some reason a few pics somehow "disappeared " from my phone. I know I had a better pic of @formariz and 1 of @Tractorhead. Phone's gettin old like me! They were running a "Waldo Special" at the Sheetz station in Mansfield! Horse mask Jay looking out wanting a ride on the train. I had a guy cracking up at the hotel with this thing! @elcamino/wheelhorse really missed out on this BBQ adventure Thurs. night. Went to Gettysburg to the Borough BBQ. What a madhouse that town is. No place to park. A church group had rented out the main restaurant. No sign on the door saying so. Girl says we cant come in but we can sit "next door" but we had to wait. @Lane Ranger comes in behind up with a group and he gets things rollin! Finally sit down in this giant room with a zillion tables , skee ball, basket ball pool and shuffle board and air hockey tables ,bar ect. Pictures don't do it justice. Then the church group decides the bar on there side isn't big enough so they invade the other side. food was good but what a zoo. Then when we left I got a parking ticket after putting all the change I had into the meter! I think it ran out before we even got our food. Now I know why I don't stay in Gettysburg and won't be goin back. They let all the "Animals" in at the WH Show! Richard's EV. This thing Slaps! Came in handy! Every time I drove it somebody stopped me. How many batteries? How long does it run! And yes you can haul a transmission in an Electric Vehicle! Much thanks to Cas for the K 90 My goal was to get this engine-less 551 running and driving at the show.Much thanks to @Tractorhead for the eye lining up the pulley. @rjg854 for Kabitzin around and finding a 31" belt and @wallfish for his belt guide expertise! Finally our entry into the @Pullhosen’s Pony Express Heavy Hauler Contest . Here's @rjg854 strapping down @953 nut's A60 electric mower, it's deck. the little cart, a tiller, a 12" plow, and an 8 speed trans all for @JPWH into the back of Richards Dakota. Also thanks to @Handy Don for the extra hands. Interior shot.

I can’t believe we are knocking on months from driver’s training for my youngest! August (July 29 actually) will mark eligibility for taking classes and getting behind the wheel. My kids have grown up driving, getting dirty, failing and excelling. No surprise there, with their father learning to wrench on Christmas toys long before they were played with, and their mother following in the footsteps of their grandfather, Adam Petty’s ASA teammate and 1994 ASA Rookie of the Year recipient. This 1992 Chevy Short Box C1500 toted Mrs. P’s Hobby Stock circle track dirt car to every race she could afford to get to, when she wasn’t penciled in for a swim meet in high school. It was a 4.3L Automatic bare bones 2wd work truck, no A/C, no power windows, just a good ole’ first set of wheels. It was passed back to her dad, and long before I was involved with this side of my family, it’s been sitting victim of high miles, hard work, and a ventilated V6 block. When we were dating, I pulled a donor engine from a junk yard and wheelbarrow toted that hefty thing about 300 yards to the register. @Lil’ Pullstart’s Great, Great Uncle Steve is a well known hot rodder in the area. He took the engine down to his shop, had it bored .030” over, rebuilt it with all new pistons, cam, timing set, bearings, valve, the whole ball of wax. It’s been on a stand waiting for this project for over 15 years, maybe 17 or so if I can count and recall dates correctly. About a year or two ago, we were camping at Grandpa’s house and Rylee started having a conversation with him about buying the truck back. It has been pushed from the yard, to the barn, filled with stuff, pushed out, pushed around, leaned on a time or two, etc. They settled on $300 as is, with the engine. I picked the engine up about a year ago. Her truck has been loaded on Grandpa’s ramp truck with a dead battery and flat on the bottom tires for even longer. Last weekend, we went over, popped some 5 on 5” wheels and tires from a race car on the back, pushed it off the ramp truck and tugged it home. I have a 5 speed manual swap to go into it, thanks to a local CL ad for the transmission and Tony Angelo from Motor Trend’s Hot Rod Garage and now his own show Stay Tuned. Since anything in the engine bay that is plastic or rubber has been cooking in the sun for a few years with no hood, I am thinking a lot of electronics will go away in favor of a nice carburetor, and an HEI ignition. I have a 2000 K3500 (5.7L 4x4) parts truck for the things like grille and headlights, washer and coolant tanks, any interior parts needed, I found a clean front bumper in my stash, and some things will be needed like good tires, brakes, etc, and we will search for those. There are more parts still at Grandpa’s like the hood, motor mounts, radiator, etc, but it’s nice the truck is home.

I could have dropped this in with the post that I have on my pulling tractor but I thought that it may be more useful here. I used a piece of unpolished stainless to make a new dash for my tractor. Well the unpolished was just not to my liking so I wanted to clean it up. I will add that polishing stainless is nothing like polishing aluminum. It takes a lot longer. A pic of the back of my new dash so you can see what I had to start with. I worked on this dash a little each night after work. Day 1 - I started by working it over with a black rouge and a buffing wheel on a drill. This took most of the dull off from the metal. Day 2 - I switched to a gray rouge and a new buffing wheel. This started to bring out a better shine from the metal. Sorry no pic. Day 3 - Start with a new buffing wheel again but switched to a green rouge. Now the dash really pops. After roughly 5hrs of buffing I'm quite happy with the results. Other than the deep scuff that I put in it with a slip of the grinder when I was making it. But I'll live with that. Materials used. https://www.harborfreight.com/4-inch-buffing-wheel-34743.html https://www.harborfreight.com/1-4-quarter-lb-black-polish-compound-96779.html https://www.harborfreight.com/1-4-quarter-lb-dark-grey-polish-compound-96769.html https://www.harborfreight.com/1-4-quarter-lb-green-polish-compound-96778.html Hope this post is of use.

Sorry for the messy garage! But I have now owned my 1977 Wheelhorse C-100 for 20 years! I got it when I was 13 years old for £300. I still remember clearly how excited I was, I live in the UK but I have always loved old American cars and 1960s and 1970s stuff, so when I got this it was the coolest thing ever. I have a ton of memories of driving it around, with a trailer on the back and my friends would take turns driving each other down to our shed/club house in the woods. It has been repainted but I always keep it rubbed down with an oily rag because I live on Dartmoor and it is super humid and wet here, especially in winter. Cheers all

EDIT My father passed away just before midnight. Thank you for all you support and reaching out. He was in great spirits right up til the very end. My Ole Man @Qball Bruce was diagnosed with bone marrow cancer a few years ago. He's been fighting the good fight and doing so for all his worth. The past few days have been quite a challenge for him. He went to Dana-Farber Cancer Institute in Boston over the weekend and they are hoping to bring him home tuesday. Some of you have met my father or parents. Believe it or not, there are decent folk even though they raised me. They are Protestant and would love to see your prayers or thoughts. I don't do Facebook or know how it works but if there is such a thing as a page I can share I will do so. I do encourage you folks to share this page by "mentioning" people or a link or whatever. The more the merrier. They would love to hear from you.

The other day I used a Wheelhorse to mow for the first time. Bittersweet considering I was doing it only because my father couldn't. On the HUGE plus side, he did get to see his front lawn freshly attended the day he passed. ❤️ This tractor will soon be returning to Maine where Trina has already named it.... after him.

I found this in the classifieds, contacted the seller, worked out a date to pick it up and brought it home today. The owner said if he had not found a buyer it was going to the scrap yard because he wanted it gone. He was having issues with the motor and didn't have time to deal with it. Timing was just right because my wife said she wanted a riding mower because she doesn't like my zero turn and was ready to shop the big box stores. The motor is a box of parts and the deck needs some repair but I will make it whole again and get it mechanically sound. This intent is to make it a dedicated mower. Work on this one should start in about 2 weeks. The seat is in very good condition and will be replaced and maybe passed on to someone.

I just received the WHCC yearly news letter that included this article on Howard. For those that may not receive the news letter, I felt it should be made available.

We got this tractor back in the fall of 2018 thanks to our friends @buckrancherBrian and his wife Jo. Of course being a mid 60s square hood short frame it was destined for BBT/ Trina. Brian had already rebuilt the carb and fuel pump. Trina and I did a few other things back then too. Wiring. General cleanup. New transmission seals. HD rear hubs. Cleaner gas tank. Etc..... After running it nearly problem free for 5 years we pulled Pigpen aside for some much needed maintenance. Here's a few pics to start....