Leaderboard

I have wanted to make this post for the past ten months; today I drove a Wheel Horse for the first time since my stroke! My wife was a bit apprehensive about the whole thing and I wasn't even sure I could get on the 310-8; but I did and it felt SOOOOOO GOOOOOOD

Last December I had a vision on a color scheme of a satin black base with gloss accents in mind . So I went into my parts inventory grabbed a frame, and just started building . 1955 /56 hood on a 1958 tractor .

Yesterday I came home to find that my son in law had power washed a few of my tractors and put them on display! He brought his C-141 automatic over for a service and decided it needed to be cleaned up, so while he had the power washer out he cleaned up a few more. I have to say not knowing this was going to happen and coming home to see it did put a smile on my face! Since I know you guys like pictures as much as me, here you go.

Trina's daughter had a baby boy today!! His name is Jaxon. Trina's been at the birthing place since yesterday evening. I'm told both new mom and new kid are doing well.

I had a Kohler #30 carb for my own C160-8 Cinnamon Horse on the bench today. This one's been soaking in the lacquer thinner for several weeks along with quite a few sessions in the ultrasonic cleaner. Here's a couple "before" pics. I use a combination of the above soak & ultrasonic cleaner intermixed with wire brushing by hand and machine. VERY.... CAREFUL.... USAGE.... of the machine spun brush. I also use a small pick and/or screwdriver and/or whatever's to hand for cleaning the grit and muck from orifices and corners. After the greatest part of the grime is gone I use a series of drills in the Dremel tool to bore a 1/8" hole in the welch plug on the side. Pop that out with whatever levering tool is close and works. More cleaning. More scraping. More brushing. Repeat. Repeat. Intermix as needed. Be sure to get in the area behind the welch plug and clean carefully. Also clean the tiny holes the feed fuel to the main bore. I use a tiny drill bit. Carefully. All the small pieces also need de-grubbing and anti tarnish treatment. I use a 3-48 tap to clean the threads of all 4 holes from the throttle and choke shafts. Once the body is clean.. I start reassembly. Here's the complete exploded parts assortment sans the 3/8" welch plug I forgot to set there. Welch plug hole shown empty. Plug setting in but not driven/flattened. Post flatten. I use the bit that's on the carb to indent the plug. Anything roundish and 1/4" or so diameter can be used. The larger bar in my hand is the "hammer/ hammah". Procedure for driving in the upper throttle shaft bore repair washer is similar. One of two in place. Both set in. Here's a closeup. You can see the two washers stacked and stuffed. Now I move to installing the throttle and choke shafts and blades. I use Blue Loctite. Brand name only. Four new screws. These are usually 3-48. Just the tiniest little dab of Loctite on each screw. Get the screws in place loosely then verify proper movement and placement of the blades. Each blade will usually need a little coaxing to set just right. Once that's satisfactory, tighten the screws. Now I install the 3 exterior screws. 1. Idle speed control. Small silver colored one. I always start high and adjust the RPM down later. 2. Upper RPM mixture. Coincidentally that's also the uppermost positioned screw. 3. Low RPM or idle air mixture screw. Be sure to set the above screws to the factory settings before starting the engine. The fuel inlet seat is threaded in next. I have a special nut driver I've modified by grinding down the circumference so it fits in the limited space. Drop the needle in and slide the float pin through. Check the adjustment. I set floats for these carbs about parallel with the body. Install the bowl gasket, then the fuel baffle. Center the bowl. Install the gasket and bowl retaining nut. Snug that up well but use caution to not overtighten particularly on original aluminum bowls. I most often replace the bowl with a Briggs and Stratton steel bowl. The older aluminum bowls are almost always crushed and deformed around the bolt hole. A few more pictures as completed.

Last night I was plowing snow with my C-145. 25 degrees out, was dressed warm, had my heated gloves on and a smile on my face. Life was pretty good !! Then all of a sudden the engine stalled just like I had turned off the key. . Pushed the old girl in the shop for some diagnostics. Found that I had no spark. Multi meter showed that I was getting "+" power to the coil but no "-". Down side - points were not making a good contact. Up side - No need to buy a new solid state coil, or a new CDI box. Nor did I have to wait for said parts to arrive or wait till morning to take a drive to get new parts. Instead a quick cleaning of the points with some 1200 grit sand paper and I was back in business. $0 repair and only 15min down time.

I bought these From @Darb1964 when I picked up the 1067. He had one and half sets. So I thought It is a nice day let’s put them on. This my Garage Queen never sees rain snow or anything else. This is what started me on Start/Gen tractors. All was my favorite model to have a close second was the TEN because at one time I had a few. I hope you enjoy the picks.

...and the rest is history. I'm so glad that back in November of 2009, the day before Thanksgiving, I was looking for a plastic dash for my 1977 B-100. I stumbled upon this site and the rest is history. So many friendships have been created just for the sake of finding a new dash. Today, the day before Thanksgiving 15 years later, I am truly thankful to have found RedSquare. 🦃

Thank you for all the prayers today. My wife's spinal injection procedure went according to plan this morning and now that the local anesthesia has worn off she if pain free. Having been using a wheel chair and otherwise sedentary for a couple of months her legs are not steady. They don't want her to return to PT or exert herself until the doctor sees her in March so progress will be slow. She will try walking with a walker tomorrow. We will be quite a pair both being on walkers.

First and foremost I have to thank @Handy Don and @Bill D And say it was great to see Don & meet Bill. The BBT and I took a nice road trip this weekend. Saturday was spent mostly on the road with two primary stops. One was to pick up all the stuff. The other was to visit my mom and help her out with some chores. Here's a few pics of what we got...

We were able to spend the beautiful Sunday showing off a few of the round hoods. It’s always a great time making memories. We were even lucky enough to bring home best and show garden tractor with the 702. They boys and I put a lot of work into it last winter and it payed off.

Trina has done it again! The 2025 RedSquare calendar is available for download!

Well, she is finally tall enough to reach the pedals. Been after me for a few years to let her drive. Today was the day and she was happy! Used half a tank of gas driving around.

Our garden is now heading into its 3rd season. Creating a usable garden space here in the New England mountains is an extreme challenge involving a lot of extra work in comparison to most areas of the country. The entire region was once covered by ice over a mile thick. When the glaciers departed, the mountains were destroyed and tremendous rock waste fields left behind. We all joke about having rocks and stones in the soil. Here, it's a little (seriously little) soil.. in with the rocks. Over the last several years we cleared an area of forest. 3+ years ago we had an excavator come in to clear the ground surface and make it somewhat level. After that we added 14+ yards of loam, all by hand, tractors and small trailers, load by load, moved a couple hundred feet from the driveway to the garden. Since then we've been picking out rocks sticks etc using an 856 tractor with the ripper or by hand. @Handy Don and I have texted more than once about the possibilities involving the use of a single tooth ripper in our garden area to pop out the rocks sticks roots etc as they rise every year from the frost. In the future I would like to be able to use a rototiller but for now there's too many rocks and sticks. It seems the ripper is a feasible solution for the time being. This weekend we used my heavier 1974 C160-8 Cinnamon Horse for the ripper work. Wanting to be conservative at the beginning, I started poking into the soil about 2" and immediately realized that could be a little deeper. I tried a 4" cut. That was the ticket. I worked back n forth at many angles. Started at the fence all the way around. Pulled every which way but loose. We learned that the pulled materials really have a tendency to stack up towards the middle of the area, logically. We also learned that we could likely use 2 ripper teeth. Maybe 3 (??) 3 might be too much. (With only one tooth there were multiple occasions where the tractor was "high centered" on rocks.) Some of those rocks were pulled out. At least 2 or 3 are too big.

As of February I'm officially an "empty nester". After a long search my son & his fiance' finally found a house that fit their needs. He had mentioned to to his Mother that "I think I'm going to need a Wheel Horse to mow the lawn", her reply was "I think your Dad can spare one". LOL. So I'm starting him out on the same model & deck I started out on in 1979, one of my C-81's with a 36" RD deck. I've had her ready to go for him for a while now & since the trailer was stiil hooked up from @Pullstart's plowday on Saturday, I decided Sunday was the day. All I can say is this was one of the greatest weekends of my life that I'll always rememember. Loaded up Delivered And yes, I'll give him a mule drive with a knob on it.

I got to play in the snow today!!

About 30-35 years ago, a customer walked into our dealership and asked my dad if he'd be interested in buying a Wheel Horse tractor. Dad says lets go take a look. He goes outside and all he sees is a Dodge Caravan in the driveway. The guy opens up the liftgate and proceeds to unload this little guy. Dad asks how much ? He thinks he paid maybe $50.00 bucks for it. Needed a new transmission pulley , a recoil , and all the guards were missing. Pushed it off to the side , and eventually shoved off to a corner of the shed. Last summer I told dad to get it out and get it running. He did , installed the new recoil , new axle seals, rebuilt the carb, new points. And then I took over; the hood needed major surgery ( all the spot welds holding the 2 pieces together were busted, tank straps were cobbled on , bottom hood mount was gone ), we located a NOS belt guard, NOS muffler, NOS deck assembly, NOS air cleaner, new cables, etc...I had to paint the hood and some of the other replacement pieces, so I blended the paint into some of the surrounding areas in an attempt to keep as much of the rest of it original. Just like the Kohler powered equipment of that era , the engine is now a completely different color than the rest of it due to different paint processes.

Trina wants all you people to know that she really enjoys the process of making up this calendar.

My new shed landed today! 10x20 in Sage Green, two double doors and two lofts. Will easily hold 6 tractors with room to walk around them, maybe more if I jam em in.

Figured it was time I start a post on here documenting my addiction! Here are two of my favorites

Old technology is the best if you have a person with an old soul around to make it work.

This one sitting in a field rotting away. So I rescued it. Tractor heavy and already have a 856 that needs love and I can't seem to give away. Saw it at a show several weeks ago and it was sitting there crying save me save me. I jokingly offered the owner a frankie for it and much to my surprise he took it. Motor was locked up so pulled it back to camp for a look see. @Achto @Wild Bill 633 and I commenced to wrenching to find out the motor is free but the SG is tight. Got it loosened up and messed with the points. Exhaust valve stuck open ... pop the head and free that up. Fired right off and drives. Service motor and seller says he has the original I could have but knowing him doubt I'll see it. Four year old Battery was stone cold dead... not a volt in it. Threw it on a charger and it did take a charge and seems to be holding it. Surprise surprise. Tires are abit needy but nothing serious. Best part everything is there, original cigar lighter woo hoo, and fairly unmolested. On the splash pad ready for a bath... sheet metal really straight. Seat & hitch worth the price of admission...

Finally completed my C-175 restoration tonight, when it’s light out I’ll take it outside for some better pictures. I’m super happy with the way it turned out and really have to thank my brother for all his help! I will be bringing it to the show as it is this year’s featured tractor.

Today's menu - Get this baby ready to light the fire. In order to do this I needed to have "dead man" throttle control. My plan is to turn the brake peddle into the gas peddle. Gathered the basic parts to make this happen. Starting with a piece of pipe that I bought for some reason. Guess this must of been the reason. I did not think that I would be able to weld to the cast metal that the peddle is made of very well, so the piece of pipe gave me some thing to weld to. I cut the threaded ends off from the pipe and the cut it length wise so that it would fit the curve of the brake peddle. Then cut the rest of the parts to make this into a gas peddle. Next up, burn these parts together. Drilled and tapped the peddle so that the assembly could be bolted in place. 2 more pieces required to make this work, a bracket to hold the throttle cable, and a bracket for a positive stop. All three completed. Gave all these parts a quick squirt with some flat black to keep from rusting. Adjustable wide open positive stop installed. Throttle cable holder and foot peddle bracket installed, with a return spring for the peddle. Also installed a return spring on the engine side of the throttle. I think the weed eater piston shift knob turned out well. With these parts installed it was time to light the fire. Good news!! It fired right up. Runs great and runs through all the gears well, butt... the strait pipe is loud and and um, loud!!! A few shots of it out in the sun light. Only thing left now is the fire suppression system "fire extinguisher" and scale it out to get the weight dialed in.

My wife has a pinched nerve in her spine due to a herniated disc which has made walking nearly imposable for almost two months. We have been going through the Medicare hoops of Physical Therapy, pain management, and injections which have not been effective. Wednesday morning, she will have an injection into the disc which is supposed to relive the pain and allow her to walk without pain. Please say a little prayer for the medical staff and my wife, Maggie, that the procedure will go well and have the desired outcome. Thanks, Dick Schmidt, 953 nut

Today in Lower Bavaria

Well I finished this 1067 last week. She is a good worker now. went thru it front to back. I hope you enjoy the picks.

I hope, I hope, I really hope, this tractor and I stay out of the bumps and bruises thread. @pfrederi offered it up for sale for $150 and I quick nabbed it! One of the rules to tractor buying is never tell how much. Well, I don’t believe this will ever go far from my possession , so I don’t mind sharing that info. The electric over hydraulic pump on the front and gravity drop have quickly grown on me. I bet I’ve got 3 or 4 hours on this thing since unloading already! It’s a beast! When we were talking about the model number, 753, seven fifty me quickly rolled off my tongue. It’s dangerous and wild. I found a cast “HOOSIER” seat for $25 from @wallfish’s pa Paul, and moved the pump forward enough to toss my spare hood on. The hood screw tabs on the gas tank are both ripped out, so I got creative with the rear hood hold downs, just some crushed 1/2” copper elbows drilled and bent a bit for zip tie action.

The Long Island Antique Power Association held its summer show and tractor pull this weekend. I went today (Sunday) with my son in law and brother. We took my Work Horse GT-1800, C-175 Automatic, and 420-LSE to the show. Here’s some pictures. Hope you enjoy!

I somehow managed to take a few pictures this year.

Pulled the plow off yesterday and stood it up ready to store. Came out this morning and found this!

My son James has been battling an infection in his foot. He was being treated by wound care for a couple of months. They decided to do surgery to remove some damaged tissue about a week and a half ago. They sent him home a couple days after surgery and it was like the infection exploded overnight. They did another surgery last Thursday and Friday morning had to remove his pinky toe. He has gone through two more surgeries since removing his pinky toe. This afternoon they removed the rest of his toes on the same foot. I asked the DR if they have stopped the infection from spreading and was told yes they had. Waiting for the DR visit Tomorrow to find out if they will have to take any more of his foot. Thank you for your prayers. Jay

I met a guy through selling some snow plow mounts and wiring, ends up being our girls both wrestle and I made an acquaintance out of him (though we are from rivaling towns). I saw him at a benefit last weekend for a watering hole dive bar that burnt down, and he saw a post I made on FB in a Wheel Horse group. He asked if I wanted an old Wheel Horse. He thought it was a 64. I don’t have any ‘64 round hoods, so I thought what the heck. I threw him the old line of @WHX?? and @Achto’s that any old Wheel Horse not running is worth a hundred bucks. He said he hoped for more, but knowing it would go to a good home he’d take it from me. I think he doubled his money reselling the stuff he bought from me, so that is why he passed it on. It’s been up on a rack for about 6 years he said, and ran then. Getting it down, I saw a deep air filter housing. The thought of a Benjamin 854 was getting me excited! Low and behold, I found the 62- serial and a K-161 under the hood, proving it’s a 702. I guess typing this, I have found its new name. I present: Benjamin.

As a retired 61-year-old who inherited 4 of my Grandfather's Wheel Horse tractors, I found a valuable resource in this forum. Here, I connected with Bob Parks (Racinbob), who at the time lived nearby and kindly agreed to help me identify all of them. I ended up keeping the 1964 Model 854 and sold the others. The 854 is a solid, primarily original tractor, and I've been using it since I was 6-years-old. I also had the RM-364 mower deck attachment, which had not been on the tractor for many years. Once again, this forum proved its worth as I could identify and obtain some attachment parts that I was missing. Last week, after some adjustments, I put the mower deck to use and mowed nearly an acre of grass without any issues. The sense of accomplishment in identifying and restoring the equipment was truly inspiring, and I felt like I was a kid again. As someone who doesn't consider themselves 'mechanically inclined,' I've grown and learned much through this project. I want to express my heartfelt thanks to all of those who guided me and showed me that with the right support, even the most daunting tasks can be tackled.

Well we didn't get the snow we were supposed to get. We have a nice ice glazing that will hang around a few days and got a snow dusting. So decided to have some fun in the 5 degree temps and do some spin outs and figure eights!

Got the herd out for the last time before most of them go to bed for the winter. Just a 520 and 48" deck is still in service to mulch leaves and the 520HC and blade is getting ready to plow snow. I did some work to a 416-8 for a fellow redsquare member so I put it in the lineup as well. Next year the Work Horse will be in the lineup as well I hope.

I did a 7 hour round trip today for this beautiful 500 hour 520. She runs awesome!

Happy Wednesday Afternoon, Wife and I took a roadtrip today, left house right around 6 am. Stopped at a nice fellas house by the name of Josh in Elizabethtown PA. He was acting as the middleman between Jason and owner of this restored C120. Josh also mentioned he runs the Lebanon PA winter show in February--he says its all indoors and 6 or 7 buildings. I may have to look into going... Then onto my GT2500 in Jacobus (York) PA... met an equally nice gentleman by the name of Keith Kauffman. Walk down to his garage and there sits a 1970 Plymouth 'Cuda 4 speed!!! Dang!!!! He recently just put a 408 stroker small block in it and has the original 340 on stand. On way out of town I looked up the dealer that had placed there dealer sticker on the Briggs shroud and found them. I stopped in and asked the gentleman if he'd like to come out and see one of his tractors head north. He came out and started talking... then took me for a short tour and told me about the list of every tractor they ever sold until Toro took over in 1986. What a cool old dealship... they didnt have any shift boots but I bought a 7473 8 speed drive belt to get him a few bucks. I told him about Redsquare and the big show and that he should look into going---the shop is about an hour away. Now its onto dinner with wife and then heading home tomorrow. Tony

Just a few. For some reason a few pics somehow "disappeared " from my phone. I know I had a better pic of @formariz and 1 of @Tractorhead. Phone's gettin old like me! They were running a "Waldo Special" at the Sheetz station in Mansfield! Horse mask Jay looking out wanting a ride on the train. I had a guy cracking up at the hotel with this thing! @elcamino/wheelhorse really missed out on this BBQ adventure Thurs. night. Went to Gettysburg to the Borough BBQ. What a madhouse that town is. No place to park. A church group had rented out the main restaurant. No sign on the door saying so. Girl says we cant come in but we can sit "next door" but we had to wait. @Lane Ranger comes in behind up with a group and he gets things rollin! Finally sit down in this giant room with a zillion tables , skee ball, basket ball pool and shuffle board and air hockey tables ,bar ect. Pictures don't do it justice. Then the church group decides the bar on there side isn't big enough so they invade the other side. food was good but what a zoo. Then when we left I got a parking ticket after putting all the change I had into the meter! I think it ran out before we even got our food. Now I know why I don't stay in Gettysburg and won't be goin back. They let all the "Animals" in at the WH Show! Richard's EV. This thing Slaps! Came in handy! Every time I drove it somebody stopped me. How many batteries? How long does it run! And yes you can haul a transmission in an Electric Vehicle! Much thanks to Cas for the K 90 My goal was to get this engine-less 551 running and driving at the show.Much thanks to @Tractorhead for the eye lining up the pulley. @rjg854 for Kabitzin around and finding a 31" belt and @wallfish for his belt guide expertise! Finally our entry into the @Pullhosen’s Pony Express Heavy Hauler Contest . Here's @rjg854 strapping down @953 nut's A60 electric mower, it's deck. the little cart, a tiller, a 12" plow, and an 8 speed trans all for @JPWH into the back of Richards Dakota. Also thanks to @Handy Don for the extra hands. Interior shot.

Last minute checks prior to big snowfall coming Wednesday evening.

No mirror pics for this one because I bought it and just drove it over to my Mother in laws house just a few blocks away. Just poured in a gallon or so of fresh gas and swapped in a fully charged battery. It then started right up even though it was -10 degrees celsius or so out. Ran a little rough at first but by the time I got it to it's temporary home it was running smooth and quiet. Hydro lift and drive both work perfectly. Deck might be seized or frozen, I will deal with that later. Has oversize tires on it, not sure what I am going to do about that. I did not make note of the hours or if the hour meter even works as the volt gauge does not.

Sorry for the messy garage! But I have now owned my 1977 Wheelhorse C-100 for 20 years! I got it when I was 13 years old for £300. I still remember clearly how excited I was, I live in the UK but I have always loved old American cars and 1960s and 1970s stuff, so when I got this it was the coolest thing ever. I have a ton of memories of driving it around, with a trailer on the back and my friends would take turns driving each other down to our shed/club house in the woods. It has been repainted but I always keep it rubbed down with an oily rag because I live on Dartmoor and it is super humid and wet here, especially in winter. Cheers all

EDIT My father passed away just before midnight. Thank you for all you support and reaching out. He was in great spirits right up til the very end. My Ole Man @Qball Bruce was diagnosed with bone marrow cancer a few years ago. He's been fighting the good fight and doing so for all his worth. The past few days have been quite a challenge for him. He went to Dana-Farber Cancer Institute in Boston over the weekend and they are hoping to bring him home tuesday. Some of you have met my father or parents. Believe it or not, there are decent folk even though they raised me. They are Protestant and would love to see your prayers or thoughts. I don't do Facebook or know how it works but if there is such a thing as a page I can share I will do so. I do encourage you folks to share this page by "mentioning" people or a link or whatever. The more the merrier. They would love to hear from you.

The other day I used a Wheelhorse to mow for the first time. Bittersweet considering I was doing it only because my father couldn't. On the HUGE plus side, he did get to see his front lawn freshly attended the day he passed. ❤️ This tractor will soon be returning to Maine where Trina has already named it.... after him.

I found this in the classifieds, contacted the seller, worked out a date to pick it up and brought it home today. The owner said if he had not found a buyer it was going to the scrap yard because he wanted it gone. He was having issues with the motor and didn't have time to deal with it. Timing was just right because my wife said she wanted a riding mower because she doesn't like my zero turn and was ready to shop the big box stores. The motor is a box of parts and the deck needs some repair but I will make it whole again and get it mechanically sound. This intent is to make it a dedicated mower. Work on this one should start in about 2 weeks. The seat is in very good condition and will be replaced and maybe passed on to someone.

I saw this machine posted on a gentlemans personal Facebook page for sale . I kept on saying I don’t need another 🙄 . Few weeks go by after tossing it around, and then @Docwheelhorse rings me and says I’m heading to Pennsylvania do you need anything out that way . So low and behold I bite the bullet, and am sure glad I did . One of the nicest C series I’ve had .Thanks a lot Tony !

Some pictures from my first day at the 2024 Wheel Horse Collector’s Club Show!