Leaderboard

RideAway Senior, fiberglass hood for sale. Was restored around 20yrs ago, and still looks pretty good. Has been kept covered in the garage for most of that time, started occasionally, but hasn't been to a show in 18yrs, so time for someone to enjoy it! The gellcoat on the fiberglass hood was crazed, so for restoration was repaired by an early Corvette specialist, including a nice paint coat. Tires are decent. Engine runs good, was rebuilt when restored. Sediment bowl gasket and shut-off screw leaks a little, so I leave the tank empty usually. Pictures are from Labor Day weekend 2021. Dan (734) 386-6661 dan@vialard.net

Time to move my 67 1267 Repowered with a K321. Engine has unknown hours but runs fine with no knocks or smoke. Hence the "Special" Came from an early 80's tractor and I converted it to look like the original Starter /Gen set up. Bud Andrews muffler. I installed newer mid and front Tach a Matic hitches so it can run the newer style attachments. I have had a 42" RD deck on it as well as a Tall Shoot snow blower. I have also plowed snow ,dirt and pulled an 8" plow with it. Has the 6 speed limited slip differential. Paint is 8 years old along with Terry's custom decals. Comes with brand new Carlisle "Farm Specialist 6-12 rear Ag's, Deestone 4.00-8 tri ribs on the front, powder coated wheels, Extended steering shaft, seat springs and adjustable seat. I built this tractor for a tall person. I am 6'1". but it can be put back. Has LED headlights and tail light. rear axle snow plow bracket goes with it Tractor is driven to my front yard for the 4th of July and to the trailer for the local steam show. Thanks for looking. SOLD

Mostly original 701 for sale. May have a broken rod as the piston doesn't move when turning the flywheel. An engine rebuild is outside my wheelhouse so I have decided to let someone more competent than me have a chance to bring it back to life. Has all the correct covers ( missing attachment hdw.) including gen/starter and appears to be original with exception of a few minor parts (shifter). Transmission seems ok, and lift functions. Just trying to recoup the $$ I spent getting it but open to reasonable offers. Thanks. PS. Forgot to add the tractor comes with original mower. Rusty but salvageable.

Restored three years ago: new wiring, excellent Goodyear tires (no cracks), front wheel weights, new seat, lights all work, new battery. This was one of my favorites. Used just to pull garden carts around the yard. Kohler 12 HP engine runs great. Unfortunately, we are moving to a retirement community, and I don't have the space for it. This is the last of my reluctant downsizing. PS: I have a set of rear wheel weights from a Simplicity, and I'll include them if it's bought before I have to move it this Saturday. HOT STEAMING DEAL !

Wheel Horse Rader 8 riding lawn tractor. One owner, always garaged, well maintained and cared for, runs great. Original owner's manuals and spare parts.

It's a 82 or 83 c195 "super C" I built this tractor to be a worker not a show tractor so it is equipped and setup for ease of use but even saying that it still looks very nice - I repowered it with a 700hr 20hp Onan from a 520h, -it has both hand and foot pedal hydro control, -linkage has been modified to make pedal smoother but it also adds about 1-2mph and allows u to have full speed in reverse -I spliced in gear reduction steering -has led volt meter, vaccum gauge, digital tachometer and correct and working hour meter for the engine -very nice original d250 seat -working and strong 3pt hitch -led headlights with additional set mounted at bottom of hood -2 sets of rear weight (inside white 25lb each\outside is WH red case weights I believe weight about 45lb) -front hub caps -new rear tires 2 years ago and new fronts at beginning of this year -aux 12v hookup --im sure I'm missing some things but like I said this was a work tractor, it does have a couple negatives, -its sat for the most part atleast a year with a couple exceptions, starts up and runs no prob but carb needs to be cleaned and tuned up, I adjust the choke handle to smooth it out is what I mean.. --im pretty sure the mid lift cylinder has a drip, which is the same as other WH cylinders so can be redone fairly easy -the wiring needs cleaned up, at one point I had a cab and 4 way plow hooked up so some of the wire from battery need cleaned out and everything straighted up.. *I'd take 1400$, I might also consider partial trades for pre 65 tractors or attachments, or a D series snow plow.. there isn't another c195 out there setup like this, it is a beast and fun to drive, I do not need to sell I'm only listing because I used my loader to plow last year and and pry going to this year and hate this girl sitting.. Pickup only Lynn Indiana ** For some additional $$ I have a brinly 3pt garden plow and a homeade 3pt stainless steel weight box with aprx 175-200lb of wheel weights in it that is pretty nice, also a nice snow cab that was for my old c160 that I used on the c195 id sell but only in addition to the tractor not selling by themselves

I am listing this Wheel Horse collection of Mr. Jay Myers. Please PM me for additional information. For serious interest, I will supply contact information of Mr Guy Myers. Guy will collect all payments and arrange pick up for purchases . It can be stored inside for pick up at the June 2023 Wheel Horse Collectors Club show in Arendtsville, Pa. C-160 8 speed m/n 103809 s/n 63570 runs strong and drives 100% with no smoke 26X12 rears 165-65X8 fronts w/4 lug trailer spindles 520 forward swept axle w/reduction steering push button removable steering wheel custom reversable seat for hoe operation Brantlly Mfg. Co. back hoe works 100% but has a slight drift on the swing probably the valve has a slight leak Wheel Horse front end loader #97-40FLO105022 Works 100% box of extra teeth for loader $3500

After 45 plus years of rebuilding kohlers I’ve decided that in January 2026 I’ll will no longer be rebuilding them. I rebuild single cylinder Kohler K and Magnum series engines k181, k240, k301, k321, k341, M8, M10, M12, M14 and M16. Long blocks starting at 650.00 depending on model and application (wheel horse, Deere, cub cadet, ford, Jacobson, gravely, economy). If I don’t have your specific engine in stock I can rebuild your engine. 8-10 day turnaround for 295.00 labor plus machine work and parts. I don’t cut corners with my rebuilds. I no longer stock or rebuild twin cylinders or K91’s and k171’s PM me with any questions and get on the schedule so I can get you done within the next 12 months.

C-175 hydro roller no engine Rough tin $50 SOLD C-81 8 speed roller missing Right rear axle no engine $50 Raider 10 6 speed m/n 103017 s/n 843664 $300 runs and drives but smokes no deck C-160 auto with 16 mag replacement engine m/n M16S spec 711502 s/n 2403565803 $500 SOLD includes 42" SD deck and electric fuel pump C-120 hydro with hydraulic lift m/n 104959 s/n 46433 16HP Kohler replacement engine new fuel pump and has 2" spacers under rear wheels $400 carb has been cleaned and it starts, runs, and drives as it should good tires 1971 Speedex model S-19 with B and S 19 HP electric start and rear cast iron wheel weights. $650 Guy installed a new carb and new used valves and front wheels and tires. It now runs and drives.

1994 520 H tractor that I purchased from Duke (Horsefixer) and then I built the loader using the P.F. Engineering plans. Duke went through the tractor and it is excellent mechanically. I also added a foot Hydro control to it. Everything works as it should and it doesn’t use or leak any oil. It has 770 hours on it. The weight bracket goes with the tractor but the weights do not go with the tractor. It is very capable for its size and very stable because I have inside rear wheel weights, fluid in the tires, and 300 pounds of counter weight out back. It is a lot of fun to use and very handy. I’m going to inherit a 4wd SCUT from a family member and I don’t have room for both or l would not be selling my baby.

1974 C-120. Bought recently from original owner. No battery. It wanted to turn over using a power pack. It has a 42” deck that needs repair.

Nice condition 1963 753. I bought this from Roy and Betty Stewardson (https://rbwheelhorsestables.yolasite.com/) up in Canada a few years ago. It comes with the HL-5 Headlight kit and seat backrest. I added the 8-speed transmission after the original 3-speed had a crack in the case. I also put in a new fuel pump a couple years ago. I've decided to thin out most of my tractors because I just don't have the time to spend with them. PM me if interested or with any questions. Thanks!

74 C 160 8 spd 1-0380. Engine runs with no knocks Tires are cracked and seat cushion is separated from seat pan. Trans works on all gears. Comes with plow and chains. Can separate. Located in Waterloo N.Y. $495 Can hold and deliver to the big show next June with payment.

Nice 540 pto attachment for Wheelhorse. Hard to find attachment Will ship in box by UPS ..

I purchased this at a local sale because it was in such unmolested condition. It has a slight fuel leak on the bottom of the tank but they did allow me to put a battery in it and a little bit of fuel so that I could start it and make sure everything operated properly. It started and was smoke-free and purred like a kitten. The fluids all look good. Even the transmission boot, while old, was still intact. I have another boot and I’m throwing it in on the sale. I probably paid too much for it but I’m trying to recoup the $435 I spent on it. The only modification I can really see is that the battery retainer looks to have been replaced and it looks to me like they put a new key switch in it. I’m sure it also has a new seat cover. I’m not an expert though so there may be other things. The front tires are the Wheel Horse tires and they hold air and are in really good condition. The rear tires are Goodyear and look to have been replaced at some point. The mower deck operates as it should and everything is free in the lift and rear hitch mechanism. Send me a message if you would like additional information of any kind.

I’m posting this here hoping there is someone interested in this tractor. This was my grandfather’s and father’s tractor, but has been sitting in the garage unused for probably 10 years. I believe it has always been stored in a garage. I’m not sure what if any issues it might have. Definitely does not start, but could just need a battery and new spark plugs. There is a mower deck, snowblower, and tiller attachment that goes with this, as well as a cab. It is located just outside of Albany, NY and will need to be picked up here. I can scrap this, but I’m hoping to find someone that can and wants to do something more with the tractor. Let me know if you want me to post any additional pictures or if you have any other questions.

My 4th custom isn't built for speed or show and certainly not for profit. "It's my thing" and I'm ready to do something new.

1975 Wheelhorse C-160, 16hp Kohler engine, 8-speed stick, 42" mower deck. Engine runs good, no smoke or oil leaks, no repairs needed for 5 years so far, needs new muffler if quieter running wanted. No rust. Currently used to cut lawn. Includes manually swiveled snow blade suspended under tractor, rear tire chains and owner's manual. Original owner.

17 Wheel Horse tractors Pickup in Alton, Illinois (St. Louis, MO area). CONDITION: Except where noted, these have mostly been sitting for some time and probably won’t start without some tinkering by you when you get them home. In other words, they “ran when parked.” All are in fair shape. Expect bumps and bruises. They are all dirty from sitting in the barn. They’ve not been left outside. I would rather sell in groups. I’ve made some example groupings with discounted pricing in the table below. If you have your own preferred grouping, let me know. PRICING: Pricing is our starting point and I will consider offers. If you’re serious, so am I. PAYMENT: Cash when you come is fine as long as you promise to follow through in a reasonable timeframe. If you need me to hold something for a prolonged period of time I might ask you to pay for it up front. TRADES: I’m probably not interested in trades, but if you have something you want to discuss just let me know. OTHER STUFF: I also have a ton of parts, mower decks, snow blades, mid mount blades, turning plows, signs, front farm PTO unit, a shredder…This stuff will only be available to those who are committed to buying things from this list and who are here to pick up. Thanks, Steve 523Dxi (SOLD) 520Lxi (SOLD) 518xi (SOLD) 18-Automatic (SOLD) 211-4 $100 252H $175 246H $150 Ranger 700 (SOLD) 500 Special (SOLD) Charger 12 (SOLD) 1075 $175 Commando V8 $150 B-60 $300 C-160-A (SOLD) C-161T-8 $200 GT-2500 $200 GT-1142 $350

753 with LMR-304 reel mower. Have lots of extra parts. Have a set of red head hub caps that could go with it for the right price. Asking $1200 obo, willing to negotiate. This tractor has sentimental value however I need to liquidate, so I want it to go to someone who will love it as much as I do. Located in Greencastle, IN Text 765-719-5574. This tractor can come with extra hood, tool box and fenders, front and rear wheels and tires. Two fuel tank towers. Multiple other parts. But this will depend on offer price. Also, some of these parts are blasted and ready for paint. A great restore candidate.

EXCELLENT CONDITION, only 696 hours, New seat, new chains, optional remote oil filter, hydraulic lift & trans both great. Kohler Magnum 18 twin starts instantly and runs smoothly. Serviced regularly. Run on ethanol-free gas. Lights all work, and tires hold air. This is my favorite tractor, but I have to sell because we're moving to a retirement community. Hate to sell it, but hope a Club member gets it.

We have available a completely restored 42" side discharge deck, model # 78345. Starting with a clean solid deck, all pieces were sandblasted, the carrier assembly and rear axle were powder coated for durability. The deck shell was epoxy primed and professionally painted and baked on using all top of the line PPG products. The underside was then coated with an industrial type bedliner which is hard and durable (not thick and rubbery like many spray in liners ) . All the wheels, rollers, bearings, nuts, bolts, hardware, springs, bushings, bearings, blades, the belt, are brand new. This essentially a better than new deck with a much higher quality / more durable finish than new. Put on your showroom quality restoration, or put it to work for another 30 years. Price is $850.00 cash only at time of pickup. NO SHIPPING offered on this item. Private message me here, or call / text during normal business hours with any questions. DO NOT EMAIL (it doesn't get checked regularly) , and again I am not shipping.

E141 used one season great condition has three1 year old batteries relays and 36 volt charger

I have for sale a fully working early 90’s 520H with a Kwik Way loader. This tractor also has an original Wheel Horse foot control that was added as an option. It also has two additional buckets that go with it. I have all of the manuals for the tractor and loader. I am the third owner but I know both the former owners. I have owned it since 2009. It’s time to let it go to hopefully, a Wheel Horse person. Everything works. I have a number of extra parts to go with it. The front end was rebuilt with oversized spindle bearings and new wheel bearings. The tires were replaced with tri ribs in front and turf tires in rear. One lift cylinder is brand new and I have the old one which could be rebuilt for a spare. The transaxle was serviced by a Wheel Horse mechanic. It is a working tractor and I still use it from time to time but it’s not heavy enough for some things that I need to do and I’m out of space. Shipping is your responsibility. Just a note for everyone on the site and especially the sellers. I recently had someone do an elaborate scam to try and get this tractor complete with a very real looking cashiers check sent via registered mail. I had my suspicions as did the bank and a five day hold was placed on the check. As it turns out it was a fraudulent check. No damage done other than I’m out $20.00 for a returned check fee and a form letter nastyGram from the bank. I am telling you this as I have not advertised this tractor anywhere but on this forum so someone got the info from this posting on this forum. Be careful as there are some pathetic people out there.

I have a brand new 1991 P220 engine that is just taking up space in my shop. I have had it for at least 20 years and was planing on using it but never did. I removed the plastic plug, installed a pipe plug, filled with oil and started it up to make sure all was good. Located in central Alabama. . Local pick up only. I have a link on youtube if you want to hear it run. https://www.youtube.com/watch?v=2qXx_tCCviM I don't have a muffler so I could only run it for a minute. This engine fits a 1989-91 Wheel Horse but could be made to fit most anything. Make offer . Thanks.

1970 Electro 12, runs good. I just took the cover off it to take pics so it does have a battery. It was rescued from the scrap yard, no idea why it was thrown away. I rebuilt the carb and it fired right up. Has the original hub caps. The hydraulic lift works good. Seat is in great shape as well as the front headlight lens. It was repainted at one time and not very well. Getting put in the scrap pile didn't help either. It has an integral hitch in the back, but if you don't need that I'll take $50 off the price. Now for the bad, I haven't changed the trans fluid because the drain plug on the bottom is stripped, the hex head is stripped out and i haven't prioritized fixing it because i don't run it much. Comes with 2 decks, one good and one for parts. Asking $650 as is. Can deliver to the big show in june.

I bought these from a seller clearing a boneyard. Goal was (and is) to keep them from going to the metal scrap yard. They have been outdoors for years and it shows. Since my knowledge of these models is practically nil I cannot add insight beyond my observations. I have no interest in working with these--I’d simply like to see them go to someone who will put the parts to use. I’d prefer not to get involved in parting the tractor or the frame. The mower deck possibly. Here they are on the trailer. First is a pretty much complete but extremely rusted Suburban/400. Rotted rims & front tires; rear AGs have some sidewall cracks but might be usable. Does not roll (it was hoisted onto the trailer). Engine does not turn. Mower deck is there but spindles are locked. Hood is not cut or dented and the throttle/choke levers are in place. The hood hold-downs are rusted out. Seat is excellent. Frame, front axle, spindles, tie rod, and steering appear solid. Three-piece transaxle seems stuck, but there was a shifter boot so probably not too bad inside. Casting code is visible but I don’t know how to read them! Has the mower deck lift adaptor in the slot hitch. Lift arm (and cable!) are there. Kohler K91T engine with carb but no air filter. Gas tank is attached under the hood. The second item is a frame & three-piece transaxle only and a different model (it doesn’t have the notched arch for lift height adjustment but it does have the lift lever with the button.) The rear hubs are there and both axles turn with no grinding so the diff is working. The shifter goes into all four positions but I think the brake drum is rusted to the band lining. Frame, front axle, spindles, and steering all seem complete. No wheels. The mower deck is a 32” with, I think, the mounting brackets for a Lawn Ranger. The gears seem ok but only one spindle is fully free. The shell is remarkably solid. The gauge wheels are definitely replacements. No detailed pictures. Full Tractor FRAME ONLY

SOLD, ty for all the interest.

1974 D200 with snowblower 3 pt and rear PTO 103 original hours Runs amazing $3350 Located in Nappanee, IN No trades

What is believed to be a 1956 restored Senior. Engine usually a one or two puller & runs/drives as should. Needs throttle clamp relocated for improved response. Time for someone else to enjoy this beauty. Pm with serious interest only please.

Restored 854 for sale, pick up only

For sale is a 1989 520H , a FULLY restored 48" side discharge deck , and a barely used 48" snow blade Tractor : I have owned this for several years and has been my main tractor the last 2 . Let me begin by saying that the hour meter works and shows 2100 hours on it. Previous owner stated that key was left on multiple times so actual hours are unknown. Unit was in great shape and did not appear to match the hours showing but for peace of mind the heads were pulled, valves done, carb was rebuilt , PTO was rebuilt, new PTO clutch disc, new drive belt, new fuel line and filter, new rear tires ( Carlisle ) , rear hubs converted to studs and lug nuts, all sheet metal has been redone professionally, new decals, new step pads, all fluids and filters changed, LED tailights, new battery. Works as it should, I have put 100 hours on this tractor. Non gear reduction / no forward swept axle! Seat is nice but has 1 small blemish. Snow Plow : 48" blade with very little use, has NOT been repainted! One of the last models produced , it has the cable actuated 5 position sector and the long reach handle. 48" deck : Fully restored using all genuine Toro / Wheel Horse parts. Sandblasted , professionally refinished , bedlined underneath for durability. All new bearings , belts , blades , etc.... Deck has not been used since being redone. Was a very clean and solid example, no patches anywhere. Not shown but included are the rear axle bracket for the plow , and the mule drive for the deck with a brand new genuine Toro belt. I will consider selling pieces individually. Private message me here, or call / text during normal business hours. Price is $2300. 00 . Cash only at time of sale. No 3rd parties , if you're buying it you are picking it up and putting eyes on it. Located in Sunbury, Pa 17801

Wheel Horse GT-14: (1969) - Model 1-7441. Includes: 48" Mower Deck, Wheel Weights, 54" Snow Plow, Snow Blower, 3-Point Hitch, Snow Chains, Maintenance History, Engine Rebuilt (See attached invoice), Extra items included. No trades, Local pickup and Cash only.

SOLD Messing around and made three of these. One already spoken for so two left. 15 oz stainless Ozark coffee mug with “Senior Moments” on one side and silhouette of a senior on the other. $35 each plus shipping if anyone is interested. Please reply here. Thanks for looking.

I will rebuild your K181, K241, K301, K321 and K341 cast iron kohler engine for 295.00 plus parts and machine work if required. In most cases cylinder will be bored, crank will be ground, valve seats ground or reconditioned. New piston, new rings, new rod, valves new or reconditioned, all new seals and gaskets. Entire engine brought back to factory spec. I no longer do performance/pulling engines or twins. If your old Kohler is knocking or smoking it's most likely time for a rebuild before it locks up on you. Once rebuilt, and properly maintained, it will give you another 30-40 years of service. I don't cut corners, I take my time and get it right. 40 plus years of working on and rebuilding k series engines. You won't be disappointed. PM me with any questions.

Just about brand new 312-8. Person that I bought this from found it in the box in the back of a dealer. Only 70 hours It comes with Plow Wheel Weights Chains 37" deck 48" deck

I have this 418-8 along with two 520-8s and I need to make some room for upcoming projects. Selling my very nice 418-8 with a nearly new rototiller. Weights are included in the price.

Wheel Horse Steering Shaft Tube Cover part numbers: 109163 , 113443 , 109529 These are reproduction 3D printed steering shaft covers that fit most Wheel Horse 300 and 400 series tractors. These are currrently discontinued. These are 3D printed with PETG so they can handle the sun/rain, they are new items and are more rigid than oem. I’m selling two grades of covers I have a Matte finish carbon reinforced model for $35 and a gloss finish non reinforced for $30 price plus actual shipping, which is usually around $7-8. I will combine multiple parts for one order (shipping fee actual cost only). Items ready to ship now. Message me here or email me for purchase. I currently have many of these ready to go in both styles. I’m also planning to bring some to the Big Show in June (lord willing and the creek don’t rise) So try to message me a week or two before the show if you want one so I can make sure I bring enough and guarantee you get one as they will otherwise be first come first served. I have verified these will fit pre Toro 308, 310, 312, 417, 418, 420-LSE, and Toro 315, 310, 312, 416 models. They measure approximately 6.5” on the shorter side. Please confirm your part number and dimensions before ordering. All orders placed by 9pm Sunday will be shipped out on Monday, shipments will be made weekly. These are made from PETG so they will handle sun, water and heat. They generally feel firmer than the later style solid molded original oem with the 3 internal fins and are worlds better than the thin plastic ones with multiple internal fins from the 80’s. These will still likely break if you strap your tractor down with a rope across the steering shaft so avoid doing that. PayPal or Venmo accepted, good and services welcome but please add 3% for the fee.

2- 23x9.50-12 tires, mounted on wheels, chains, and Wheel Horse weights which can be mounted on the inside or outside of the wheels. Priced to sell at $100 / tire, $200 total.

Update *** No takers - Decided to Keep *** Selling my A-60 electric. It was NOS when I got it last year. Put new deep cell batteries in it and I still have the NOS batteries in the original wrappers - no acid. Built in charger. Has maybe 5 hours run time on it. Paved road only. Has mower deck - never used. Would include custom trailer built from wheel barrow. Perfect show cruiser. Perfect condition. $750 or B/O for the A-60, NOS batteries and trailer.. PM me if interested or any questions.

I may kick myself for this, but I think I’m ready to part ways with some tractors. I can’t ride them all! It runs good, no smoke, shifts well. I chose not to paint the hood or the repop belt guard. Original shower head muffler. K-91 engine. Good gas tank and new fuel bowl from K&B Horse Parts. If the cast seat is not desired I can put a normal seat back on. It’s quite small! The footrests and showerhead muffler go with it. Pick up in Michigan, or possible delivery to the Big Show in 2024.

1977 C-120. Excellent mechanical condition- great candidate for full restoration. I rebuilt the engine 2 years ago- it now has 60 hours on it- machine shop bored and honed cylinder 0.010” over, cut valve seats for new valves, and ground crankshaft 0.010” under- and I rebuilt w/ new oversize rod, piston, new rings, new crankshaft bearings, all new gaskets, etc. Starts right away and runs strong. Hydrostatic trans in good shape. 42” mower deck is a little beat up, but solid. Other new parts: battery (last month), tie rod ends, custom wide rear wheels, new tires all around, receiver hitch.

Runs and drives really nice. Carb has been blasted and rebuilt, new charging stator under the flywheel, new muffler and converted to electronic ignition. If you want to mow with it you'll need blades. I know these usually don't bring much money, bit it's had quite a bit of work done to it since I drug it out of a literal barn and I thought it was in good enough shape that it deserved a new life. Would make a nice tractor for a kid or grandkid at shows!

Very good condition. Will fit any of the xi series tractors. It is complete with everything needed to Mount and use it including the owners manual. Great piece of machinery, I just don’t use it enough and momma wants her tractor set up for mowing/blowing. So…reach out to me with questions if you are interested… (tractor in pictures—NOT INCLUDED) Just complete loader to install on the xi of your choice—power steering models are more convenient with the added front end weight.

1975 C-160 Runs and moves good. Smokes on start and clears up. New plug Newly rebuilt carb with OEM kit. New fuel filter New engine oil New Trans filter/fluid change Nice front chrome hub caps Tractor only Can come with 75# weights for extra and does not come with 55# weights in pics Front Axle was reamed and New bushings installed. Very tight. New heim style tie rods. It is NOT orange like pic. In person it's red. Does not come with plow or custom hitch. Tractor only.

Moved my boat outa the garage today which exposed this 48” deck that I was storing under it. Moved the deck around three different times today and decided to sell it rather than continue moving and storing it. I have a lots of 36” and 42” decks that I prefer for my smallish lawn. I think it’s a 2002 deck, still has some red paint on the underside, the blades are in great shape as well. No rot holes, no weld repairs, has the reinforcement bar across the front edge. With proper care this could be the last deck you ever buy!! Includes the mule drive. Local pickup here in Andover Connecticut OR…I can haul it to the WH Show in PA. Asking $450 or best offer.

1990 312H with 710hrs Recently serviced ready for work. Includes 42"SD deck in good shape

Early 90s Wheel Horse 312-8 Tractor....12hp Kohler Magnum Engine...Runs and Operates Great....Only 580 hrs....Fresh Engine Oil...New Transmission Oil....New Fuel Lines and Fuel Filter...New Spark Plug...Carburetor Cleaned....Put an Attachment on and Go....475.00...Pick Up Only ...Thanks.

Any Wheel Horse collectors out there? This all original 1968 lawn ranger needs a good home! It starts right up and is a true piece of history!

Kwikway loader that is currently on my 520H (Tractor not for Sale) with custom quick attach for switching between bucket and custom made pallet forks. The sub-frame allows it to fit some other models as well. I designed and built the pallet forks and quick attach setup several years ago. Just remove 1 pin on each side to switch implements. Forks are adjustable and removable. 2" box receiver built into fork rack Also included is a custom rear axle suitcase weight bracket that holds up to 6 of the 43lb weights You can bring a tractor and we can install it on your tractor here or bring a trailer and I can load onto a trailer for you. Pictured TRACTOR and WEIGHTS NOT for Sale.