Leaderboard

My oncologist had the hospital give me two iron infusions during my hospital stay after surgery. No lifting over 10 lbs for 1 month. I had my follow up visit with the surgeon. Everything is good just need to finish healing and give my colon time to start working properly. I'm back to work and getting better every day. Still waiting for the results from the lab to find out if the cancer is totally gone.

Hell ya! This is why I bought my first Wheel Horse this year: to haul firewood up to the house rack from my drying racks down further on the micro-homestead... I haul 4 carts of splits (about 1/5 a cord) up to the house every 2 to 3 weeks. For the last 5 years I've been doing it by hand, pushing a wheel barrow uphill, about 50 yards. This started to get to be a bit much especially when it was really muddy or really icy. Hurt my back or tripped one too many times. Now I've got a beautiful Horse and have become a part of the hobby! The way my property lies, I can't bring the tractor right up to the house rack - there's a patio with furniture, a deck, and a picnic table in the way. So I pull the tractor up close to the house, disconnect the cart and attach the handle, and wheel the cart about 7 yards over to the rack, unload, bring the cart back and attach it, and go back down. Likewise, can't get the tractor in between the racks so I disconnect cart, wheel over a few feet to the rack, fill her up, reconnect, and haul her uphill! Sounds tedious but I have a great system going now and it's pretty straight forward. Loving this tractor.

Grandkids on their tractors.

I know... I was joking ... but with your capacity to make things move I'm thinking Ranger Rick will go ahead and write you up if the Kia winds up in a tree...

Custom maple dash for ’61-’62 Round Hood holds voltmeter and ammeter. (6-speed replaced 3-speed hence two shift knobs) Adapter for spring-mounted seat to raise it 1.25" and move it rearward 2.0". Much more comfortable for a 6’2” operator. Sleeve hitch adaptor inverts for different trailer hitching

That engine isn't Kia's best effort. Four coworkers have/had Kias with that engine. Three have had replacement engines installed. Even being a freebie I think you might have paid too much. Steve

Right ??? He should just flip it and give the money to Mrs. P to help offset medical costs ....

The NCAA playoffs are near. Most of you know I'm a big Notre Dame fan who will be playing Indiana for the first time since 1991. We were at that game and it was one of the best times we've had and a football game. We've been to a lot of games and the fans on both sides have always played well together but with this one the fan interaction was second to none. I've always wished they would schedule them more often. At all the Notre Dame games and NASCAR races we went to I always purchased a program. I had to dig it out. Notice the program and the ticket price. I was thumbing through it mainly to refresh my mind as to who played that year. I came across this. There's going to be a bit of a rivalry in this house Friday night. Nancy and I pull for IU EXCEPT this time since it involves Notre Dame. Our daughter has a Masters degree from IU. It's gonna be fun!

As per request of @953 nut here's a couple part numbers and pics of the clutch springs we use. For Trina's mid 60s tractors I ordered clutch/brake pedal springs from McMaster Carr. These should fit most 3 and 6 speed tractors with a SINGLE pedal. https://www.mcmaster.com/#3114T112 Extension Springs with Hook Ends Black-Oxide Music-Wire Steel, 4.5" Long, 0.625" OD These are just a touch stronger than the stainless steel ones I've found recommended. New one on top. The one that I use for all my TWO PEDAL tractors from 1968 up is the standard Toro part number 108035.

Yeah could not post just one! First pic is my first meet and greet as a guest in CT. That is vinsrj my son brennanbo and I checking out my early 55’. Fast forward a bit to the two of us riding around big show on our seniors. Being able to share this hobby with my son and of course all the friends I made along the way makes it special.

Damn it, I posted that before I read Ed’s link!!

PTO hoop ready to be installed. PTO hoop installed. I used a 5/32 cotter pin instead of the hairpin clip at the bottom of the hoop. For the trunnion I used a thicker washer under the hairpin clip to eliminate excess play.

https://www.bing.com/search?q=dog+wood+def&form=WSBEDG&qs=SW&cvid=88adf9e92faa4f6c949cc605bdeb3fd4&pq=dog+wood+def&cc=US&setlang=en-US&PC=LCTS&nclid=342288486DD863DE34CA0A9E6AD77345&ts=1734441106458&wsso=Moderate

I would invest zero $. Just haul it to the scrapper and collect my $300.

This is how we've moved some wood! C-85

Us old guys are sneaky fast.

Or the way my girls go thru vehicles how about just a beater with a heater??? You guys want a belly acher @Achto picked up a Saturn on the down low. He calls it a ... never mind his slang we have younguns here... but suffice to say he uses it to cruise the chicks. Kev's just trying to keep up with the Joneses !!!

Please edit and remove your comment that belts stretch. They don’t. Belts are made with strong internal cords wrapped with rubber and fabric, just like truck and car tires.. The sides of the belt do gradually wear off allowing the belt to drop lower into the groove of the pulley but their length has not changed. Belts wear out and seem longer, and sometimes deteriorate from age or corruption, but they do not stretch.

PTO pivot plate assembly ready to install. PTO pivot plate assembly installed and torqued to 26ft/lb. PTO clutch plate and bearing race ready to install. PTO clutch plate and bearing race installed using a little blue loctite on the bolt threads. Bolts torqued to 96in/lb.

Here another 300, 400 seat pan reinforcement (no welding require) 1/8 x 1 1/2" this been on since 2014. Will need some grinding if you have a hydro with belt release, or a Dial-a -Height. It's bolted in with the 4 shifter panel bolts. I also added a cross piece of 1/8" as I raised the fender bracket , gas tank and fender 1 3/4" for some 25" tires. Here is the 312-8 beside a stock height C-120 but it isn't stock. There also a modified clevis hitch to work with a receiver hitch.

From a capable motor vehicle. It needs to be able to start and drive and be mobile. We can hunt from something that won’t start, or drive, or move…

Here's a few. Aluminum battery hold down bracket. Home shop made HD batter cables. Wheel spacers for added width which gives stability. This Pic shows the trailer hub swap for the front of a tractor. I wish I had better pics.

I’ve got a few!

Another frame reinforcing, that can be done with out taking the tractor apart. The edges of the 1 1/2" x 1/4" need to be ground to fit between the ridges. unless it's an old one. Reinforcing 6" spindles.

It's an old machine that needs some cleaning and TLC. It's a model PM serial no. 239 I had to disassemble it to move it in the shop so I decided to clean it up so I could paint it before reassembly.

Jay, stay out of the rain, wouldn't want you to rust. Glad to hear you are doing well, looking forward to seeing you back at work on the dump truck project.

Not much of a update but I got the nails all pulled out of the boards and got the boards stacked There was a bunch of hay, dirt, and crap behind those boards for the chute but it looks like it stayed dry so it doesn't appear to have rotted anything out.

Best of luck with that, Hank.

... there are plenty born every minute ...

Indeed. If there is someone who thinks it a good idea to take that thing off your hands for $3,800 go ahead and make their day!

I read some of the horror stories online. Thanks for that rabbit hole At 200k on the ticker, I wonder if it’s been replaced, or if the rods are still doing what they’re supposed to be doing!

That would be a # 15 Woodruff key which is 1/4" thick and 1" long. any hardware store should have them.

Fixed a loose 520 steering wheel. Drilled it out to 7/8" and made an adapter also raised it 1 3/4". It was a real pain as you can't drill a round hole in potmetal. While I had it apart I replaced the bushing with a ball bearing on the steering shaft. This Bracket is only used on 1988, 1989, and 1990 500 series.

Nothing a military issue P-51 cant take care of for you.

What's that white stuff on the ground?

Fully equipped deer stand. heat radio lights reclining seats electric operated shooting ports

Be happy to!

Eric @ebinmaine, please do a new post with the spring part number and source. The "What have you done to your Wheel Horse" post doesn't come up most of the time when people do a search. If there is a topic titled CLUTCH SPRING people looking for one will be able to benefit from your information.

If you're referring to the rubber/plastic grip, I think I have several new ones in my NOS parts box.... I haven't had time to try to list and sell a lot of stuff. Happy to contribute one to this project if you'd pay for or split the shipping cost... Beautiful restoration work - I'm enjoying following along, as I'm sure many here are.

Priceless.

PTO grip installed. I did not have a new one here so I used the best one I had on hand.

They do work great for that ....

Good plan. It could be that one belt got an extra heavy blue coating that is coming off. It'll good to see if it continues.

What's that black and white wood in there??

Transmission drive belt 78-7100 replaced by 7473 - HB x 81.9" or 5/8" x 81.9" A 5/8" x 82" belt will work.

@meadowfield Sorry I have gotten to start on this until this evening. here's some pictures and a materials list. I have a 1st draft drawing made and need to go verify some dimensions on the frame and a hood.. It is 7 simple parts welded into a somewhat of a complicated assembly It may be a few more days until I get back to finishing the drawing. Looking Forward Looking Backward Right Side Left Side Looking Down Material List 1/4" x 1-1/4 x 25 Right Side 1/4 x 3-1/8 x 7-1/2 Upper Right Side 1/4" x 1-1/4" 17-1/2' est Left Side 1/4"x 1-1/4" x 17-1/2" Upper piece 1/4 x 1" x 6-1/8" Steering Support 3/4" I.D. Schedule 40 Pipe Steering Shaft Guide 1/8" x 3/4" x 2-5/5" strap

The F-plate reinforcement that I made for my pulling tractor.

This is just another "one" picture

This was more of a quick storm cleanup mode for the in-laws. Chipper on the front with a 2" receiver and the cart and saw on the back to take what will be good for firewood.