Leaderboard

Lots of rain and strong winds yesterday but that's it

We did very well, lost power for a couple hours while we slept Thursday evening but we had no tree damage and the creek didn't come out of its banks so all is good. Great deal of flooding and roads washed out fifty miles east and west of our home, storm seemed to split and gone around the mountains. @clueless is right near where the hurricane made landfall so pray for their safety. Hope all is well for @Sailman, lots of flooding near Atlanta and he is near a large string of lakes.

Had some wind and about 9 1/2" of rain. No damage but lost power for about 5 hours. My son lives in Grovetown, GA 165 miles east of me and he had many trees down in his yard and neighborhood.

Hurricane Helene looked pretty vicious. @clueless @lawnman_56 @JPWH are things ok in your area?

Thanks to all who advised me and helped along the way. The tiller is hooked up and works like a champ! After a few trial and errors with belts and routing and so forth I got it all together, believe it or not is pretty quiet when it’s engaged, even tho it was a tad muddy out today.. well actually a lot muddy, I ran it anyhow for a trial run… I wish I had one of these years ago!!!!!! I’m still trying to figure out the spring assist lift, I have none of that, but I can muscle it up easily enough. I’ll most likely run this around 4-5 times per year, so I’m not sure I’m too worried about that.unless one of you guys have a bracket or two laying around you’d sell. Anyhow, thanks again and here are some pictures for your viewing pleasure.. and yes I installed the snow cab the other day to try it on for size and was too lazy to take it off.. and then it started raining while I was playing with my new toy, so at least I stayed dry!

With the charging system back up and functioning it was time to mow. 42”RD under a 414-8

On Tuesday of this week she had a bilateral knee replacement (s) . It was in Springfield Ohio and glad to be out of there without a car accident. Saw some stuff, believe me. Surgeons are a funny lot and they kept insisting that home was the best place to recover. We have a supplemental Medicare and when I was driving to the hospital to visit her the next day, a calm series of thoughts guided me toward listening heavenward and to my own common sense. When I started questioning some things about my conflict with me being the caregiver, suddenly they said if we went to a recovery center,it won't have to happen yet that day. She was still at a high pain level,but I did manage to get her there OK. The heavenly voice was correct in that there were and still are manageable problems internally that require a hospital setting. It would have been a nightmare to deal with them at home and may have required an ambulance to get her back to hospital. Now she is impatient with a great physical therapy team as well as proper care for her medical issues . My wife was pretty scared to have both knees replaced at once, but is now very happy that she did. We certainly are getting our money's worth for paying the extra premium.

New rings in valves in this B-80 engine. Long block is going to go into Howard over the winter.

This week I finally got a 418-8. Been waiting about 12 years or since my first Wheel Horse. Immaculate machine - I'm assuming stored indoors for 37 years. Fabulous rumble from the engine. Got it home, gave it a bath, discovered the chrome hub cups in reasonably good shape. Hope there's a thread on restoring them. Discovered rear axle attachment bracket with original clevis pins. Then I noticed the chain coming out the back Yup. Rockshaft and lift cable installed. Ready for a tiller. The best part - paid about $225 US.

Symptoms sound like a bad Bendix Drive. Plastic parts don't last fore ever.

1550 hours on the meter so a rebuild may be in the future. P.O. just used it to only cut grass (good sized property) and when the mower deck rotted away he decided to let it go. Had to wait a week to go get it and the sellers were inundated with calls - naturally. Good people. They made a deal with me and honoured it even with offers of more than they were asking. Sadly that kind of character seems to be lacking more and more these days.

Looks fun... This is how i piled my chain: @Pullstart has the pile now...

Wow! $225! What a deal! Yours is in great shape, is the hour meter working? How many hours does it show? The 418’s are some of my favorite tractors. I too looked for a long time to find a 418-8 because I wanted the 18HP, 8-speed with the ELECTRIC LIFT for rototilling. I finally found one in Massachusetts, it was a little rough, but after some love it turned out nice. Prior to that I also found a 418-C in Massachusetts that was in great condition, and again just needed some attention. Not that I need it but I wouldn’t mind having a nice 418-A so I’d have all of the 418’s !!

Alright, I finally bought one without asking you guys 27 million questions. It’s a b80 8 speed for 350 dollars. Runs drives but needs a new carburetor that it comes with. I will show pictures this week. This is my second WH

The BBT and her Momma spent several hours processing firewood. They brought some up from the area behind the garden, split that, then stacked it. I worked on a few different things in the big barn and basement. Got another Kohler carb in the ultrasonic cleaner. Got the yard trailer lift mechanism bolted on. Got the road trailer in the barn for repairs too. That'll be getting a new front ball receiver, lift jack, and spring bushings with bolts. Also started working on a pair of plates for my hub puller. I'll post those in "Tools". Several tractors got to move around and stretched their legs a bit.

I added it to the herd. It’s in reasonably good condition, it runs great. It’s just worn and rusted a bit. it’s got a seized rear discharge deck roughly the size of the 37” one on my 312. So far it needs just little stuff a knob there and a greasing or lubing there. i think the attach o matic is seized or something broke in it as the handle moves but you can’t pick up or down the deck. I have a couple days off in the next few days so I’ll figure it out. Definitely not bad for $150.

I got the angle iron on and front stand back on. Also mounted a chain through the front bolts. I'll experiment with the chain length. I left it long on purpose.

All is well here Dick. We had about 9 1/2" in the rain gauge, some wind but no damage.

Send it to me and I'll see what can be done.

@JPWH I have had a stoma since 2017 when my colon was removed. Mine is an illeostomy, sounds you have a colostomy. Please let me know if you have questions or want advice. You can contact me by PM if you want and I'll give you my number. If someone is getting on your nerves, you can always tell them you're going to crap in their gas tank and mean it. 😉

Thanks for asking. It seems that the storm sort-of split and went around us. We got some wind and rain but nothing like Asheville to the east or Maggie Valley to the west. Power went out at some time overnight but we didn't have any tree damage and the creek that runs through our property stayed in its banks so all is good.

I went and looked at a 1995 Ford GT85 with 48" deck for our church that was supposedly ready to go except for a dead battery. I tried jumping it and no spark to the plugs in the Kohler M18. The owner of the tractor told me to take it since he wanted it gone, so I loaded it up and brought it home. I picked up a new factory ignition module for it and will add the drive belts when reinstalling the engine. A local shop has it doing the work and checking it over. The tractor has 777 hours and except for the slight front hood and headlight damage is in good shape. Our church may still end up with it but at this time I am trying to get it going. This is made by Shibaura for New Holland and supposedly a great tractor. Any tips are appreciated!

So I got this for free but know little to nothing about them. Looking it over I see no markings on it at all. I'm told it should have a rating decal and or marking on it. Without that is it pretty much useless for any business ? More for just home use now? It's built like a Sherman tank. Heavy as heck. Has adjustable venting and a place to ground it. Even has the key to lock it. 44 inches wide. 44 tall. 19 deep. I got it for free but hoping I can sell it for some lunch money. Any value on this thing? It is solid. Could use some cleaning on inside floor. Lots of spilled paint and such. Look forward to hearing your thoughts and opinions. Thanks.

Agreed KP... right next to a mid mount blade. Wished mine wasn't on a hydro but the lift is nice...

You can use a dry lube like graphite but that's it. Briggs uses lots of plastic parts... guvs, cam gears, now even carbs. Better than grinding off a ring gear I guess...

As has been said, might be the Bendix. Also could be that the bushings are shot. They tend to make a squealing/ grinding sound when they go. Swapping the Bendix is easy.

You done good!

I agree with @953 nut. most likely a bad starter drive. inexpensive part. https://www.napaonline.com/en/p/SME703455?cid=paidsearch_shopping_dcoe_google&campaign=GSC-Small-Engine-Lawn-Garden&campaign_id=11655985660&adgroup_id=112185060854&adtype=pla_with_promotion&gclid=CjwKCAjw0t63BhAUEiwA5xP54evpgovRq3mqXGmPkZlN4qVQ9fpC5vesNNUPmx7xNiEKRLOQtG2ZmBoC0ZoQAvD_BwE&gclsrc=aw.ds&gad_source=1 https://www.acehardware.com/departments/lawn-and-garden/lawn-mowers/lawn-mower-parts/7175060?store=16510&gad_source=1&gclid=CjwKCAjw0t63BhAUEiwA5xP54ex8ifWwYN8UiXJzk1Rj12XSF0kHnGpzoYici6CFpccrMpPaSd8l5RoCBYMQAvD_BwE&gclsrc=aw.ds

Lost power about 5 or 6 hours Friday. Came back on around 4:30 pm or so.

The manuals pictures are awful! I found a snowplow bracket locally, already had the cable and the short chain came with the set up,

I snagged a similar double door cabinet years ago for $30... Good shape, use it to store paint, fuel & such at the garage ( we do cutting, grinding & welding there)...

Most all 308, 310 and 312 8 speed have 1" axles. I have heard some have 1 1/8" axles but have not seen one. I know the 312's with 1100 Eaton hydro have 1 1/8" axles. The 308 and 310 has the 3 amp. charging system with AC for the lights. My 1985 312-8 also has the 3 amp charging system with AC for the lights. I have a later model 312-8 with 1" axles and 15 amp charging system, don't know the year model.

For use at a business or in any location with open flames an insurance company/OSHA will want to see a UL label with fire rating numbers. For someone putting up in a home shop you might be able to get some money for it. I grabbed a could 8-foot truck bed cabinets and leave them outside at the corner of the garage.

Anyone who doesn't have part "F" coverage in their Medicare supplement should look into it. The extra premium you pay is nothing compared to the bills that can pile up without it. I pray that your wife will make a speedy and complete recovery. Home is by far the best place for final recovery but inpatient PT for initial recovery was a wise choice.

This dog is going to be the death of me. Today on the way home from our hike he unblucked himself and hopped out of the car in the middle of the intersection on Rt 15. Fortunately all the other drivers saw it too, and the dog himself just stood there stunned while I got my vehicle stopped and ran back to get him.

Many medium and high voltage motors and generators have pre-formed coils that are made with the vacuum/pressure process. Large motors with form wound wire coils may be dipped with the vacuum pressure process.

My second best steal. $75 for a complete but not running gt 1142 work horse. Any time I need a part I just take it off the Work Horse. 418-8 needed a new clutch pulley. Just finished installing it.

Does the PO have any others to give away?

Like I said the other day we put some stuff away over the weekend. My 2 rj-58’s, 753, and 603. Plus my oldest son’s all original 856. The last piece of the puzzle is Wheelhorse_kid’s 604 up top. Plus he has 2 small engines (Briggs and Stratton WMB and a Continental) up there along with my spare Kohler K90. This is the beefed up version of what I have had for years. It helps get some out of the way. It’s nice to have my garage back. I have plenty of projects I’d like to work on in there lol.

I never really thunk of that. Actually a good idea, because it doesn’t take much weight to raise the nose of a wheel horse. Now I gotta drag the welder back out…

@ebinmaine like the various ideas as you go , also like the ball hitch , find that to be the easiest hook up , and very smooth in its function . pete

So to give an update… Went out to tinker with the Cub that wouldn’t turn over. Started with the battery. Took it to have it load tested. Failed the load test miserably. Battery at almost 4 years old exactly. Bought a new battery that was a battery for power equipment ( snowmobile, ATV, motorcycle) because a lawn and garden will not fit the space. $131.00 !!! Brought the new battery home and installed it… Turn it over and…. It fired right up ! Glad I don’t have to check every terminal connection and chase down an electrical problem, cause I’m not good at that. Got lucky, if you wanna call $131.00 for a tractor battery lucky.

HORSE THIEF!!!!! Well done sir! Beautiful tractor! 18 horses and an 8-speed? She will till the street without a single grunt!

Love mine!

The B-80 is a great tractor same basic tractor as the C-series. The C's just have a larger engine, high back seat, and lights, Don't think the B had lights unless it was a special order. The B-80 8 speeds were only made in 1976 and 1977. The model numbers start wit either a 61 or 71.

A fine machine!

I have one of those for my truck reciever, it has a lower "foot" that sits on the ground for lifting up to 400 #'s (deer carcass) And it pivots to load in the bed. I never thought of using it on a tractor, can I see your hitch setup?

Excellent work! I hope you didn't hold your finger there the whole time. Bet that got hot 🔥 🥵

Thanks! Yeah, been pretty busy, and will continue to be for a while. Next up is priming and coating that metal roof with black silicone (not great for heat dissipation, but going for the resale value curb appeal...). Garage is already done and it looks great. After that, I have some wood floors to sand and refinish, then new kitchen countertops, sink, and some painting to do. Whew!