Leaderboard

Or an excuse to get another Wheel Horse.

You don't need your truck back, you need a new truck and a new body shop. It is time to turn the page.

grandson , marines , MIRIMAR NAVAL AIR STATION , CALIF , 9 MONTHS TO GO ON , C130J , CREW CHIEF / LOADMASTER , my son asked him if it was worth all the crap ? IT WAS SO WORTH IT ! BE FLYING THE PACIFIC , OTHER GRANDSON , first welding job , boat yard , framing , related metal repairs , $ 30 an hour , also has submarine welding in the works , groton ct ,, grandaughter , just back from a european school trip , hopes to go pack to paris next fall, then off to college , support them when we can , always turn around a question with , what do you think ? get them involved , talk it over , figure it out , that back and forth , is the magic you want . happy grand parents , pete / terry

Its for the push mowers from the mid-late 60s.

Dragged out the 867 after being in the back of the shed for almost 10 months.. fired right up

I have found that putting a glob of tacky grease on each end of the spring will help hold the balls in place. I then use an allen wrench or piece 3/16 round stock to compress the assembly while the shift rails are installed.

@Lil’ Pullstart

I was just thinking the same thing. I was never a fan of bells and whistles on my vehichles, but I am impressed with Mrs. Ks new SUVs driver assist features. Bells ring if an object is approaching when backing out in reverse and if you don't react, auto brakes are applied. Bells ring and warnings flash in the drivers mirror if you attempt to change lanes with a car in the blind spot. Steering wheel vibrates if you get close to the lane lines and it will make a steering correction if you don't make a correction. When in cruise control mode, a preset safe distance with the vehicle in front is auto maintained by slowing and or stopping Auto hi low beams headlight control. The auto assist can be set to meet the drivers needs. From complete off to warning only to complete brake and steering assist. Oh, and it has Immoblizers to prevent theft. All some pretty good features for old drivers with poor memory, hearing , and stiff necks that don't turn.

C-175

Have had this for a year and a half and figured it was time to replace the original one. Removed the 2 pulleys and spacers cleaned them up and painted the two pulleys black. It amazes me how someone could take the chrome nut that holds the cover on and use water pump pliers on the nut instead of an 1 1/8'' open end wrench Oh well. Fortunate to have had the opportunity to find one of these tractors. Very grateful .

nice collection!!

It’s nice to have choices when the lawn needs a trim….(I know, it’s Monday )

Actually @Lane Ranger just it's the rails that are different. The forks remained the same. The early rails are 3515/3516 and were upgraded to 5515/5516. The shift stop pin (3573) needs to be replaced with a slightly longer 5614 pin. The 3573 pin could be used but you wouldn't get the benefit that the upgraded rails provide. The spring and balls remain the same.

Years ago we had a 1054 transmission that kept getting locked in place when it was being shifted. We tore transmission down to replace the old shifter forks with the newer versions. Wheel Horse originally had shifter forks with half moon cuts in the forks that were more narrow . Wheel Horse determined that they needed to a deeper half moon cut in the shifter forks and sold replacements. My brother dad, brother and I rebuilt the transmission and were finishing it up when we got to the same place you are Lee. We had to put the two steel ball bearings and the spring in the transmission to complete the rebuild. When you put the deeper half moon shifter forks in you have to put a longer spring (there is a part number for that). We worked on this for about two hours late in the day trying to get the two steel balls and the spring to no avail. So we quit for the night. Next morning we went out and mom came with us. She had lived with our Wheel Horse obsession for forty years so she was not a novice. So she suggested we use a a bamboo chop stick to set the balls and spring an place. It worked like a charm as it held all the little parts in place as we lowered the shifter fork in place setting the fork up to work perfect! **** I have posted some pics but of a three piece RJ/Suburban transmission not a1054. ****

Me too. Which means anything I want to bring

I just purchased this 77B-60 with a 48" deck and tiller. Cleaned the points and fired it up after they said it sat 4 years! I'm asking for any guidance you can give me on finding parts for attachments etc. Right now need the "mule drive" for the tiller and would like a hitch. Front wheels for the deck. What part numbers should I be looking for.

Been to the above today near Penrith, Cumbria. Some photo's for you.

Another one that hasn’t seen the light of day in a while is my C-141 8 Speed with Sweepster Model 48 rotary broom. Fresh battery and some fresh gas and she fired right up! One day a few years ago I left it out on a windy day only to come back to the two side windows and the rear window all cracked, badly. I guess once one went it let in more air and the others couldn’t take it? I don’t know, but I do know that it was old and brittle so I removed what was left. Funny thing is that the windshield is still fine!

Seeing @Sparkys 867 reminded me that I should get my Commando 8 out. Hasn’t been out in years! At the big show this year I bought a set of cultivators for it, even though I don’t have a garden!! I’m going to take them back off and paint them because they probably won’t see dirt for a while. I know, I know it has the wrong hood decals!!

Hubs should not slide on the axle and you will want to pull the hub (or both if they're both doing it) and figure out what's going on before you damage your axle. You really want a second set screw w/locking nut 90* from the other.

to the forum. Axles in an 8 speed typically have about 1/8" or so of axial (in/out) slop. If that is what you are seeing, it is normal. If you have up/down, or front/back slop, that is not normal. Usually means the axle bearings are shot. You have found a good place to ask questions. Between the more active members on the forum, I think we have broken and fixed just about anything on a Wheel Horse that can be broken and fixed. Remember, the only stupid question is the one you didn't ask. Have fun with your new Horse.

I put a flip up plate on a 312 and didn't have to drill any holes. i would think the fender pan on the 3,4,500 series is all the same.

It doesn't mount directly to the fender but to the flip up plate. If the holes don't line up you could just drill new holes if you don't mind.

I do it just like @stevasaurus' video's. I don't like putting any grease in the bore or on the balls. Don't want them to stick or hang up. In fact I clean out the bore with long q tips and give them a light polish with fine paper and make sure every slides easily before assembly. I do put a small amount of white assembly lube on the shift rails but that's it.

You are one sick dude.

If you can save those brackets you're well on your way. 1976 and 1977 were unique in that the B-Series were identical to the C-Series except for a few bolt on items. Engine horsepower, high back seat vs low back, 15" steering wheel vs 13", 23-8.50 vs 22-7.50 rear tires, headlights standard on C's, optional on B's. Your B-60 started out with a rope start which is probably why there's no battery holder on yours. Someone did what looks like a clean job converting it to a "B-160". Here's my "B-160" It was a B-80 when I purchased it new.

Not my video, but wanted to share. I hope, maybe someday to get up to Waterloo and other Deere places to tour their stuff:

Also, sorry to hear what the world’s coming to…

If there is a terminal on the bottom it is the "A" and wire goes to A on the generator. Upper Terminals from left to right will be "L" load (for lighter/lights) "BAT" battery positive and "F" Field goes to F on the generator.

Maybe a tool to add leverage to turning an old brass natural gas ball valve or smaller water line? Stuck valve or hard to reach?

You can google Wheel Horse deck rollers and get lots of options. New deck roller spindles can be made easily with 1/2" rod and some 1" flat if you can weld. As said above check out "Wheel Horse Parts & More" he sells a complete tiller drive with belt.

A few things we learned on day one. Three kill cones and two processing stations is way backwards. Or we just don’t have enough processing ability. The three kill cones kept the hot water bath from getting too hot. With the burner on low, it was challenging to keep the fire lit and not get over temp. Me thinks a thermostat setup of sorts would be helpful. Our pressure cooker pot wasn’t big enough to process geese. Cousin Eddys lived another day. One of our helpers brought over an overdue on life meat bird. It weighed in at 11 lbs 8 oz! It was about the max size for the pot. We need more capacity to process geese, or we have to go old school plucking them. The plucker is great in theory, but it clogs with feathers all too often. It also works best to chop the legs off below the knee, otherwise the bird gets stuck easily. Back to water temp. Too hot is almost worse than not hot enough. Too hot, and the skin comes off with the feathers. Not hot enough and the feathers simply don’t pluck. Remedy? Toss it back in the hot water bath and try again. No remedy for putting skin back on. We also had two vacuum packers running, but that got backed up as well. After the close to 70 birds, there were about 15-18 left to final rinse, pat dry, and bag. I can see the allure of the heat shrink twist bags as well, but we’d need to add another turkey fryer pot to the mix, or bag and cool a bunch of birds, then switch the scald pot over to sealing. The grinder pump does a great job, on everything but the gizzards for the most part. I wish we could have kept more of those, but we were behind on processors in the first place, without further cuts. Live and learn. Yesterday, we took a day off and spent it at the lake with friends. It was a much needed day of rest. I have some pressure washing to do. I also learned that red camo is my favorite camo. The blood trough at the kill cones station was littered with various reds. In deer hunting terms, there was lung blood, liver blood and heart blood all spattered together. Quite the sight to see! I was the only one of the bunch hungry for chicken at the end of the day, so tacos for lunch and fish and burgers for dinner it was!

Ate like kings at the ocean today, right after I took this picture they dumped a ton of shrimp on the pile. Once a year the guys from my firehouse do a seafood boil

@JCM That was probably the same guy that drilled the hole in the dashboard!

I learned about the time I was in 3rd grade not to sharpen your pencil, sit down at your desk and lay the pencil on your desk. Especially if the desk sloped towards you because when said pencil rolls off, and you snap your legs closed to keep it from hitting the floor, you may carry the newly sharpened lead in your leg to this day. This past week I was fishing with brother-in-law. I was focused on tying on a new lure. He made a cast that went perpendicular to the direction he thought he was casting. His lure hit my glasses and then hook stuck in my nose. He had to remove the hood because I had no idea of which way to pull it. Fortunately it didn't embed the barb. One of the things about attending preaching service on Sunday morning is it give a fellow a chance to dig our splinters and scrub fingers of caulking, glue and paint!

I use my noice cancelling blue tooth ear phones as often as I can while mowing… and I DO sing at the top of my lungs!

A tack puller????

this is what is published on Tractordata.com for c145 tranny ----------- " Eaton hydrostatic was offered throughout the production run. Additionally, a Sundstrand hydrostatic was used on some C-145 tractors in 1980, model code 01-14KS01."

How did you end up reading this thread as the title of it clearly counts you out!!!! (crack'n myself up)

2 mill for that trashed car, 15 mill to fix it and sell for 40 mill The rich get richer

Wow, maybe you need a new truck Gregor?

And a couple more photos!

How does that hold up with the heat from the motor I have been trying to find engine enamel to match my international harvester red paint i used on the rest of the tractor but have had no luck on an exact match

I never really put much thought into it but I always assumed the tab thingy on the idler pulley was just for keeping the belt in place. Otherwise you wouldn't hear "ya gotta have the belt guard on to stop the belt' so often. My 76 (bought new and original) has the upper and lower tabs on the front of the belt guard and I make sure they are adjusted properly. Without the belt guard the belt won't stop even though it has the idler pulley tab. My 854 was missing the idler pulley tab and more than once I released the clutch only to have the belt miss the idler pulley. It seems like it would be easy to put the belt back on but when it happens the belt would get pinched requiring the guard to be removed. I can't get to the pulleys to accurately measure them without removing parts. Maybe somebody can chime in with the correct sizes. That almost has to be the issue. The idler pulley size really doesn't matter (within reason). It will tension the belt just so far whether it's 2" or 10". I just checked the parts manual on the 854. It doesn't even show a tab on the idler pulley.

It's not uncommon for someone putting an engine pulley from a hydro on an eight speed. They are a bit larger meaning a longer belt would be needed

The Man has a C160 8 speed !! Excellent find Mike. That'll easily become a favorite worker for you.

I’ve been using Rotella straight 30 for over 20 years. Haven’t blown anything up yet. No need to overthink oil. I have enough to worry about.

Ok, the nicer of the 754s has Cecil Pond's signature on the gas tank. Problem is that a lot of the signature has faded over the years from not being clear coated. Should I clear coat it to try to preserve what is left or is it too far gone? Also, who else signed the tank below Mr. Pond?

Thank you Gary for the kind words. Yes, we had fun with it, and I'm still having a good bit of fun with it, but like you I'm ready for the kids to take over some of this stuff and let me sit back and enjoy them taking over. I'll be 59 in ten more days. I'm thinking a little differently now. In another 10 years I want to be able to look back at a life well spent. How I'm doing that is by respecting God and doing my best to follow His commandments. I've learned by doing this, everything else falls into place. I can then teach my children and grandchildren about life, and how to handle money, and what's really important, and what is basically meaningless. Getting them up and running on their own will provide for me some stress free time where I can like you, sit back and brush some nuts and bolts.