Leaderboard

Some other cool stuff...

Pulling... since I was operating the eliminator I didn't get many pics. Hopefully others did... yep.... The Moll boys @jeremi3210 had some nice pulls. Since this is just for fun and we wanted to see Jacob beat his old man I didn’t start the weight box moving 'till he was half way down the track! Dan even hooked up Betty for a tug... Oh and Dan got 1st in the 3500 class....got his entry fee + 10 bucks back!

So I found this 701 back in the winter and the PO said it had been in his family as far back as he could remember. Was in a storage building for the last 15 years and he says it ran when parked. I am just now getting around to working on it and REALLY need some recommendations on how to best "preserve" it. Don't want to do a restoration, want to keep it as honest and original as it is. I did use Penetrol on the toolbox, seat stand and v bracket fender support since they had so much rust. Was amazed at how solid they were under the rust! I have done the oil rub down on the fenders (they really soaked it up) but not sure what is best route for the tins. Just the oil rub down, penetrol, others? I don't want to do anything to "ruin" the value of it in its current condition. Ideas from the purists?? I know we all love pictures so....

Pay $100 to the big ugly guy under the Coleman Canopy on the corner!

Saturday nite feed... we ate like hogs or ate hogs... One of the main reasons we go thru all this work setting up campers, hot, cold, rain, hauling horses, tearing down...Dan rolled up a couple of fatties... heart attack loafs. Our buddy Joel on the Case above rotisseried some barnyard buzzards. His wife makes some marvelous 🥔 I topped it off with some bacon 🥓 wrapped asparagi... We need to start planning menus for Portage Kev.

Mystery Mower......needs a little more work tho! Stop by at the show and see it.

Hauled home a non-running 1992 416-8 (Onan) this weekend. Started messing with it today, pretty sure the tank was mostly water. Drained the tank, removed it, cleaned it and everything around it. Yanked the original grommet and fuel valve, if I find fuel line tomorrow it’ll all get replaced and hopefully I’ll finally hear it run.

Looks like a vertical shaft machine. All "Classic" horizontals had a gap in the center to mate up with the center/ lower console.

It's amazing to see the plastic dash in as good shape as it is! Most dash panels get broken when the choke or throttle cable get bound up. Not many original model 701 survivor tractors left, due to all the unique parts it's also the hardest Wheel Horse model to restore. Wild Bill in Richmond VA

Is that the thing called Wheelhorse Yoga? 😄

Just picked up a 310-8 rear discharge with 201 hours. Tractor is in very good condition from the others I saw on FB Marketplace. Even the seat isn't cracked. Paid $600.00. I was initially looking for a larger tractor like a 520, but I came to my senses and realize that I always go bigger than I really need for my smaller yard. The only thing I needed to buy was a new air filter and PTO belt. I like the simplicity of a non-hydro drive and manual lift mower deck. I have owned Case-Ingersols in the past and currently have a Honda 5013 4x4 for snow blowing duties. The Wheel Horse did a great job of mowing on my first time using her.

You can even start by unplugging the bulbs. They can short when a filament breaks. Seen it more than once.

@cafoose looks like fish food to me , they come in a variety of colors , and also winged . want to be sitting on / in the water in a pontoon kick boat , 4/5 wt flyrod and roll casting into the shadowy area close to shore . just sayin , pete

If you look close, you can see a guy with red suspenders wandering around aimlessly looking for @Ed Kennell and his buckets!

Just show up..free parking and free admission. GPS: 615 Narrows Rd Biglerville Pa

If not, it might get covered back up right quick !!!!

I hope that when the tarp comes off it is a Wheel Horse, or at least started out as one.

I truly admire the folks in the world willing and able to preserve significant products from our industrial/commercial past. The research, time, talent, and treasure that go into it are significant and the results inform the rest of us in positive ways. Like many others here, though, I have my stuff to use it.

Sail: That is a real nice survivor. Maybe just a clean everything and just enjoy it. I have had good luck with Marvel to bring back the color. Enjoy the ride.

Thank you Mike we try. When sitting by our exhibits a ton of older gents stop by and tell us about how they remember growing up on a . Usually leads to alot of plavering. Bonus when they still have it and don't know what to do with it...

It’s still Sunday so I’m still postin’ pics! Took these this afternoon, I was going to get my 417-A in the picture but it’s my snowblower tractor and it’s hibernating for the summer! My 416-H is dirty and didn’t want to be in the picture.

This is my latest project mounting this Sears sickle bar on a B100 . I had it mounted on a 854 a few years ago and it worked great. I bought a haban sickle bar and mounted it to a 312 for now I had to make some modifications but it's a much better set up than the Sears. Once I get this rig up and running it's going to get put up for sale. I still have to get a belt for it. I used a piece of string and looped it on all the pulleys and came up with a 102 in . Tomorrow I'm gonna try and get a belt.

I scavenged some tires that hold air… and repurposed the CASE orange rear wheels for Justin! The rears might not stay on this tractor forever, or at least for the show… but they transport well being so skinny.

It's gonna be Dinomania!

Welcome to RedSquare, and if you go to the show be prepared to be overwhelmed and have a good time.

@squonk you have me confused with HOWARD ! @ri702bill We are playing nice, Santa doesn't show up for another 6 months.

found the diagrams on partstree.com - the seat fender pan is for all 260 series, plus 270 - thanks for helping.

Hmmm... Biglerville PA Fairgrounds - heard that name before somewhere..... Arial shot in June usually has a sea of red little critters runnin' around for some reason....

Having restored one 701 in 2013 and now completing my second 701, I can't disagree about "hardest to restore". I've been working on the second one for 5 years. The dash on @Sailman 701 does show typical cracks. If the dash needs to be replaced, the ones that @wheelhorsemanis making are much stronger.

No Prom Queens here, they are all workers and get used as such. Wasn't that what Cecil and Elmer had in mind for these anyway...?? Bill

I appreciate your interest in holding it’s value, but why not enjoy it while you’re at it? The only tractors that seem sacred to me to keep original, are the Senior, Lever Steer and RJ35. Ironically, none of them are original, so that takes the pressure off! Last year at Portage, we purchased a full detail package from a lady here in MI at the auction. The stipulation is that the machine must be original paint. I am pretty sure I have no tractors needing detail that have original paint, so we are just holding the ticket for a rainy day and a survivor worth spit shining.

Good score on the 701. Sometimes I think about selling mine, but then I think with my luck I'd probably never find another one.

I’d love to have a seat back like this (when I built the “seat riser” I made a provision for adding a back). However, I realize that it’d get in my way for my most frequent use--wnen I have the 36” mower on, there is no way to get close so I sit on the seat sideways and then swing my leg over (making sure to have the lift lever positioned FORWARD first.

I knew it was still in there from last year. I think you got the trailer stuck in the mud so it was marooned. Steve will be the proud owner of a NOS T shirt some day!

@WHX?? that green thing some kinda sissy bonnet girlly umbrella I spy over yer head?

More when I sober up abit... Today's view from the Senior seat

Play nice, boys, or no WH parts for you this year.....

Download the Demystification Guide and it will show the individual circuits. There is a green wire that goes thru the 9 pin engine connector that carries the headlight current, trace it both ways looking for a short.

Hot Damn! That is an amazing bit of Yankee ingenuity, creativity and perseverance there @Pullstart ! In this day of many people lacking a good work ethic and expecting someone else or the govt to do it for 'em...your an inspiration. I bet Elmer and Cecil would approve.... And happy chickens to boot!

@squonk I have been trying to be nice , but NO BBQ FOR YOU. Randy and I will go and leave you in the pickup bed tied up under a tarp!

Jacks in Sarver, Pa. closed end of last year. It was owned by Clyde and Rita Jack Bush. They were also Stihl. There is a write up on Butler Eagle newspaper website if interested. They are probably on here.

Yeah, like that !! Those must be RJ's, as seen from above.....

ABSOFLIPPINLUTELY!! I contribute good coffee and a bad attitude. Trina is the nice host.

Installed the repaired gas tanks on the 2 854's. Built a hitch for Hank and tested the bifold trailer ramp gate.

A bearing failure could also result in uneven seal wear thus leaking again fast.

I got the engine and seat bolted tight. I assembled the steering as well.

The solid seat pan sat twisted, like the base was welded on wrong. I think I have a fix for it! Since there will be so many at the show, I need to make ours not get lost! The hood will remain as is, and the seat is pretty unique.