Leaderboard

Was helping friend clean out her dad's house after his recent passing... saw this on wall in his basement man cave. Thought of J.D. Hogg and his Cadillac.... Then thought of my "Rat" C 160... Lmao... Tony

Wanted to get the walk behind blower out of the garage for the summer.. haven't used it in 3 years now. Had to move several horses and other summer equipment to get it in the barn.

Instead of waiting until the weekend I decided to spend a few hours after work the last couple of days to finish my 656 project up. Engine purrs like a kitten at idle, roars like a lion at full speed. Always love the feeling I get when I start up an engine that I have rebuilt. Put about 3/10's on the hour meter doing heat cycles & driving around a little bit. She will be back in the field by tomorrow doing some work with a lite disc harrow. Feels good to have this off my plate, now maybe I can get some work done on my stuff.

For the record Pete. I've never met either @WHX?? Jim or @Achto Dan... But I believe according to the stories I've been told by @Pullstart and some couple few others... Dan couldn't create the animosity. Jim now .. I izznt so sure.

So how many Horse owners can say they had to scrap the underwear out of the engine before they could whirl it over?

Where are the rocks????

I'll chime in when I have time to get long winded and some pics. I just so happen to have 4 tractors stuffed it right now. It doubles as winter storage.

Picked up Putt Putt and Chloe yesterday. They were a big hit at The HUB of Barry County’s AG Day!

Moved another one to it's new home. The 704 will be a father / son project for a neighbor.

I messed up and showed that to my wife- who quickly informed me that her dad has a set of longhorns just like yours. ...Then she started talking about which of my tractors they would look best on! She's obviously never watched me maneuver a dozer blade! It's dangerous to be in the vicinity! At least the dozer has trip springs!

Trina got the steering tower and belt guard on today.

I wouldn’t know where that picture is… not like it’s in my favorites….

This evening we rebuilt the fuel pump and carb. Polished up the fittings. Trina installed both.

Any animosity between @WHX?? & I is always in good fun.

With the underwear you have a very special Horse.

I love it when family members chime in with "If you buy this you can use my that! "

I needed to do some soil checks to see how dry the field has become. This plow was set up for cruising behind a 953, but Putt Putt didn’t mind either! It was dry enough to pull the camper out! I have to drive about 1/8 mile or so to the field entrance to easily pull it to the road, then the driveway.

I was already on it @ri702bill I really enjoy our 5th wheel toy hauler and the way it hauls behind Norman. The axle placement seems different than a standard 5th wheel however and some day, I’ll learn how to back it up efficiently! I can’t say I notice the difference in pulling when it’s loaded or unloaded. It’s just backing up that is still odd. I have been hauling trailers for quite a few years before tractors and campers too. Boats, deck overs, gooseneck, bumper pull, you name it. Most toy haulers have a fuel dock on them, so you can haul empty if you choose. The hard part, is timing the, to run out just as you load them! The ramp is quite steep and I can’t imagine NOT power loading. All you hauler garages have ventilation built in. There are generally two vents, one high and one low. You can scoop air with either, or dump air with either. Either way, they are still 2x2 construction on wheels and things move. Our glass slider shuts and locks but still manages to open. The furnace and a/c ducting are shared between the garage and living quarters. There may be power vent options, it’s worth looking into. I’ve made due with the tie downs provided. The floors have a pre-determined tie down layout and the D rings are recessed into the wood, but sandwich the rubber floor. Pretty much you deal with it and get creative. Our garage is 8’x13’ and can fit 4 tractors, corn hole boards, and a few odds and ends comfortably. I could probably fit 5-6 small machines if I tried hard. This year, the RJ58 is the feature at the Big Show and I really wanted to pour a big selection of RJs out of the rig but the girls want to have their pick or show machines this year and I’m not going to argue if they want to participate. Did I do ok? Any questions I didn’t cover? @WHX?? has his bumper pull Wolf Pack with an open floor plan. The tractors are in the living room/bedroom/kitchen area while hauling. His lungs and sniffer probably tick on napalm and palmall so there’s that… Looking for pictures, I was reminded of this - make sure the tire shop gives you high pressure valve stems! The extra toy weight over or behind the axles can push air pressure past the rubber valve stems and the wheel! Also, if that new 3/4 ton is a long bed, there’s always room for one more little guy in the bed.

I would try to knock a bit more coin off the price, if it doesn’t run well enough for a test drive… however my bet is a fuel system cleaning is definitely in order. Has it been stored inside it’s whole life? Other than sun damage to the seat, paint, etc… the transmissions are known to allow water to run down the shifter and add to the oil inside the transmission. Be sure to check all fluids and levels. Verify that the front end and steering is tight, has been greased, etc. I don’t know a ton about Onans first hand, but I’d highly recommend removing all cooling tins and cleaning the cylinders and air passages before running it too hard. Good luck!

I’m new(ish) to dealing with old wheel horses. I have a 702 that is running well but it needs some work. My welds broke in my foot rest so I need to repair that and I feel like extra bracketing was added later (don’t look like original wheel horse brackets) but the brackets probably have a well intended purpose. I want to learn everything I can about my 702. My eventual goal is to strip it down and refinish it entirely, I’d just like to understand it all first. I live in Virginia near the coast and it’s hard to find wheel horse junkies down this way. If anyone has bracket diagrams on how attachments should be mounted I’d love to see them. Also, if anyone in VA has 702 attachments I’d be very interested in buying!

Nothing I can add to this! Maybe a And don't sweat the restoration. Fix it the way you want and enjoy it. Contrary to an ugly rumor, there is no such department known as the Tractor Police. There are no rules! I've restored a couple, touched up others. But ALL of my tractors are workers, and that's what they were built for. If I wanted trailer queens I'd restore green stuff! ...No, actually I wouldn't for any reason restore green stuff.

Who broached them hubs... you two timing me?!? Tip on that brake spring EB ... slip a piece of tubing over it to keep from wearing into the band.

Here's a teaser of the shifters. More progress.

Yes Dan and I have a great bromance... sorry a little but I thought EB and I had a pretty nice bromance too till he started two timing me... ... sorry again Pete ... did I mention we are a close knit bunch here...

That's kinda personal... So's that... And that... And well... @ebinmaine... really??? underwear, pickles, sloths and pimento's...? Oh man... Where's @Pullstart's latest injury when you need it???

Btw, thank you for even considering sharing some of that sheathing with me. I ended up using a $20 universal choke cable. It is functional. Not great, but functional. I don't want to create animosity between you and @Achto Thanks again for offering it to a newb!

And hills...

I’m only interested in cutting grass and plowing snow. My driveway is pretty short. My preference would be a hydraulic lift, especially for plowing, but my #1 focus is mowing my lawn, which will be fine with a manual lift.

I can't believe no one said get them both yet!

I'd offer $350 and settle somewhere in between. Carb clean is essential. Battery is probably bad and engine dies when battery dies. Onan 16 hp is a great engine. My 416 has over 1000 hours. Only thing I've ever replaced is rectifier and carburetor.

You may want to ask @Pullstart - Kevin has a travel trailer with the Ge-rage area at the rear. He may also tell you that you are light on carrying 2-3 tractors. He can probably stuff 12-16 in like cordwood if needed...

Also another thing to think about: if you're thinking of using on a Wheel Horse, be sure the pump is rated for side loads. Most pumps these days are designed to run direct drive with a lovejoy connector, and don't have bearing support on the main shaft. They will wear and fail quickly if they aren't made to stand up to belt drive.

Even though I’m not a Tecumseh fan, if it runs good I’d leave it. Especially since I’m a “ like it all original kinda guy!” Since my first techy on my go-cart when I was a kid, to my log splitter I’ve always had issues with them. I now own only one techy and I’m definitely not changing it, especially since it only has approximately 3-4 hours on it since 1966. My Reo RR-46. We are going to need plenty of pictures of your C-120 when you get it @Docwheelhorse because you know how much we love pictures! Here’s my Techy 4hp Reo. I think I’ve also found a rarity with this because I’ve never seen another one with tiller steer.

Sorry to hear that @jeepdan. My dad had the widowmaker last Friday morning and coded in the ER in Pittsburgh but he's in a rehab unit today. Really makes me think about my mortality and it's tough. I hope you're doing well. BTW, looks like a good worker you have there. I have the same model but a year older. Very capable.

I'm going to work on that stoutosity thing. I did till and push some dirt this evening under close supervision of the terrorist...small flagstone delivery scheduled for Friday

SHE'S A ROLLER !

Reassembly has begun!! Steering pillow block and lower shaft is in. Front axle with its new bushings and pin. THAT. Is VERY tight now. What an excellent modification. Hubs have been chosen. Transmission pulley set out. Transmission magnetic drain plug in.

Something awfully familiar about this picture... @Pullstart expertly packed my newest E141 in the toy hauler and my yard art in the truck bed when he delivered them from the Big Show last year... "Shoe Horn" is Kevin's middle name!!!

I got a smaller one with the tractor I just bought, along with a 48" mower deck. I'm not sure I'll ever use the grader.

Just how long does it take a pair of Haines breifs to disintegrate? I wod say it's been that long since it may have ran.

Booth Bay Harbor Maine.

Doing a complete re align on the dash machine.I think part of the issue is a variance in filament, so I going full temp tower/wall extrusion test to fine tune the extrusion factor.

I lift the hanging dingus first, slide the deck under, lower the dingus and slip it into the lift slot. Then i flip up the tach-a-matic arm and eyeball it...making sure the tach-a-matic is open..and pull back on the lift..the deck raises, the rod engages on the lUl, i turn the tach handle and give the deck a shake..usually drops right in. Full disclosure...mine are hydraulic lift or factory electric lift, im sure that helps some. Want fun...60" deck on a deere 420, the deck is like 200lbs, and theres a drive shaft, 2 lift points and a front draft arm.

Condolences. It’s sad and unfortunate but there’s nothing for it. Cherish that machine, it will always remind you of him. Long may it run!

Please accept my condolances - not my favorite way for me to get a new-to-me tractor. We still have my FIL's 702 here, honestly, I'd rather have him.........

I do like squonk. really not all that hard ------- course this is after I have removed/installed couple hundred

Someone left these nifty little trailer balls bolted in the front end. Must of had small trailers?

Ya comin to the Big Show, I got em.

Swapped the wheels from the mini IH 1468 to the 512-D