Leaderboard

It's a 82 or 83 c195 "super C" I built this tractor to be a worker not a show tractor so it is equipped and setup for ease of use but even saying that it still looks very nice - I repowered it with a 700hr 20hp Onan from a 520h, -it has both hand and foot pedal hydro control, -linkage has been modified to make pedal smoother but it also adds about 1-2mph and allows u to have full speed in reverse -I spliced in gear reduction steering -has led volt meter, vaccum gauge, digital tachometer and correct and working hour meter for the engine -very nice original d250 seat -working and strong 3pt hitch -led headlights with additional set mounted at bottom of hood -2 sets of rear weight (inside white 25lb each\outside is WH red case weights I believe weight about 45lb) -front hub caps -new rear tires 2 years ago and new fronts at beginning of this year -aux 12v hookup --im sure I'm missing some things but like I said this was a work tractor, it does have a couple negatives, -its sat for the most part atleast a year with a couple exceptions, starts up and runs no prob but carb needs to be cleaned and tuned up, I adjust the choke handle to smooth it out is what I mean.. --im pretty sure the mid lift cylinder has a drip, which is the same as other WH cylinders so can be redone fairly easy -the wiring needs cleaned up, at one point I had a cab and 4 way plow hooked up so some of the wire from battery need cleaned out and everything straighted up.. *I'd take 1400$, I might also consider partial trades for pre 65 tractors or attachments, or a D series snow plow.. there isn't another c195 out there setup like this, it is a beast and fun to drive, I do not need to sell I'm only listing because I used my loader to plow last year and and pry going to this year and hate this girl sitting.. Pickup only Lynn Indiana ** For some additional $$ I have a brinly 3pt garden plow and a homeade 3pt stainless steel weight box with aprx 175-200lb of wheel weights in it that is pretty nice, also a nice snow cab that was for my old c160 that I used on the c195 id sell but only in addition to the tractor not selling by themselves

I have for sale a nice USED set of 4 hubcaps to fit 6" front wheels and 12" rear wheels. Caps look very nice , with a few minor scratches on each and one ding on one of the rears. Very minor corrosion on the inside of the rears as seen in the photos. All clips are present. These blemishes are barely noticeable when installed. Price is $125.00 / shipped / cash, check, money order, or Paypal. Continental US. only.