Leaderboard
Popular Content
Showing content with the highest reputation on 11/24/2021 in all areas
-
15 pointsI hope to be able to make it to the big show next year. This year was to hard with covid and the high flying cost. But I might just have found a solution. Instead of kote d'or (goldcoast), I will be writing The Big Show PA USA on my well...ticket? 2021-11-24 16-05-05_Trim.mp4
-
7 pointsOut behind my garage there's a NEST! It's about a foot high and three feet across! I'm pretty sure those are WHEEL HORSE EGGS ! I had no idea they hatched from eggs !
-
7 pointsSomeone we all know and love wants to know if the new Snapper he picked up will plow snow to earn its keep till Spring time to sell comes around... ROFLMAO... (he doesn't really... but it was a good way to start a Happy Turkey day thread) Tony
-
7 pointsYou could go solid but don't fasten the pipe to the frame. It has to move due to the wobble mount engine. @Snoopy11 has the right idea. I have the EZ-Drain on my workers. I love them.
-
6 pointsChatting with my best friends on !!!
-
6 pointsDid a little bit to the 312-8 today...replaced the leaky fuel valve and grommet. Also put on the snow plow for the season...and BEST of all! I got it to fit in the shed with all the other stuff! It's an 8x10 so a game of tetris was in order...
-
5 points
-
5 pointsHe may be better off taking the mulcher off the mower and blowing the snow off with the side discharge.
-
5 pointsWHAT... is that...? His wife is hiding in the house instead of holding up her sign at the curb that says: Don
-
5 pointsI just drove an hour to pick up the HI-LOW shifter of my C141D that my mind forgot when picking up the chassis. I hope I have everything now, since the Decklift mechanism came in a box. We got to keep these horses as complete as possible!
-
5 pointsI tend to always forget to install a drainpipe. Always end up making a mess, heck at least I have free rust prevention.
-
5 pointsWe got a few inches of snow last night. I had to take the 875 out to play in it. I'm sure the snow didn't need to be cleared from the driveway but what fun would that be.
-
5 pointsReplaced the seat pan with the correct one. Purchased a new seat and installed the seat springs correctly. Wiped a little dirt off. Starting to look a little better. Before After
-
4 pointsAaaahhh, my one year is in April. It was my dad’s for about 5 years but then I got it running for him so he gave it to me because he was going scrap it long ago. I’m torn on which I like better. They’re both great but for almost opposite reasons.
-
4 pointsThanks -----and to all a ----Happy Thanksgiving--- And I'm unanimous in this.....
-
4 pointsYour dog had more activity/energie in those two short video the mine has in a complete day!
-
4 pointsIf we make turkey. we stuff a bearcan inside the hole, and put it on the BBQ. delicious! I am feeling hungry and it is 2am here.
-
4 pointsThanks buddy! We know one holiday that we all celebrate... Christmas. Therefore, I bid you Merry Christmas, even if it is a bit early! Don
-
4 pointsWe don't celebrate thanksgiving here, but I wish you all a very good thanksgiving!
-
4 pointsThose front tires are smaller then donuts.... I guess a fluid fill ain't gone do much on those.
-
4 pointsI got the plow off of my 607 (plow was originally bought for the 520) and put it back on the 520 after I FINALLY got my flywheel key. It was nice to have both tractors running.
-
4 points
-
4 points@Maxwell-8 You may want to contact @Tractorhead if the box is big enough both of you could make the trip and you will have someone to talk to.
-
4 pointsGreat plan!!! We'll have @squonk wait for your package to arrive at the bus stop.
-
4 pointsI borrowed my FILs splitter for about a year. Was thrilled to have it too. Then I realized that it would work you every bit as hard as you want it to! There is no heat like wood heat. Not counting the 3 or 4 times it warms you up before using the wood!
-
4 pointsIn your search, look behind the box stores for returns. For example, my son was at TSC and asked about a log splitter in the impound area, the result was that it was returned as non-functioning from new. He bought it real cheap, took it home and fastened the Lovejoy coupling properly and it worked fine. These stores don't have a proper repair facility and often need to send the equipment out for work, so they welcome the chance to just get rid of it.
-
4 pointsI take the lazy approach. Put this in the washer bottle, use it while rolling down the road a few times. Does just as good as the treatment in my opinion. Plus it gets reapplied every time that you use the windshield washers on the vehicle.
-
4 pointsHappens a lot. My favorite are the ones that get it fixed and don't tell you what they found.
-
4 pointsAny 520 model after 1990 had swept axles. 91 and up had reduction gears. The only exception was the 520-HC. It had swept axles before 1990.
-
4 pointsJust my opinion- but I wouldn't change anthing on that machine. It looks great just as it is!
-
4 points
-
4 pointsWhen I was doing wood I tried to drop the trees I needed for the next season in winter, if I could get to them. Sometimes just before deer season. The deer like the tops and in the spring the leaves still try to grow and suck a lot of the water out. End of August, September drag them out and split up. I miss doing it, crazy as that sounds, maybe I miss the ability to do it. It was my time.
-
3 pointsGet back on the nest and stay there till they hatch, it's too cold to leave them exposed overnight.
-
3 pointsOh I'm that alright but it's usually followed by another word that's synonymous with donkey 🐴🐴
-
3 pointsWhen she came home from the shelter her name was Tina. Well that just weren't gonna work with the BBT Trina already here. We named the pup something else but that didn't stick..... Meeha is sort of adapted from and rhymes with the severely shortened "come here". C'mere! Mere! Meeha! The Mirror.... Well that's @Pullstart 's fault. I cain't help if'n them mid western folk don't know proper "R" usage an' howta speak "Maine".
-
3 pointsNo need to choose. Accept them for what they are and get a few more.
-
3 pointsAnd here I was thinkin our tractors were made in a factory???
-
3 pointsDon't let the short videos fool you. This is the standard:
-
3 pointsThat looks killer. Your problem would seem to be a worn backet? wrong spring angle?. Since my new belt is not yet stretched. I have the opposed problem where the disengage is jumping on, and the handle gets hung up in the up position
-
3 pointsWOWOW, WHEEL PONY's!!!
-
3 pointsAnd yes, I knew that part number off the top of my head... Don
-
3 pointsSure is, I hope I can say that sunday as well, when I own my first horse for one year!
-
3 pointsThat looks like Steve @stevasaurus...!!! Don
-
3 pointsPut one in my 953. Didn't work. Electric pump solved it.
-
3 pointsI'm guessing opening that trunk at the big show will be something like this
-
3 pointsWith a welded tab you usually do have to at least loosen the idler pulley to get the belt in.
-
3 pointsAgreed. Trina happened to find the one we have not long after it was posted and luckily enough only about 10 minutes away which was fantastic. Needless to say we were on that like flies on .... Well anyway we went right over and picked it up. 😂
-
3 pointsJim, let me know what else you need. Mike
-
3 pointsDid you see the V8 emblem painted on the door that is a flat head Ford emblem. Bet it has a flat head Ford V8 in it. My old 50 Mercury V8 you could balance a Nickle on the fender with it running.
-
3 pointsWent out in the shop & took a pic of my C145. Mine has a piece of 3/8" pipe that is 2" long including the pipe cap. So I would say 3/8" pipe 2" long.
This leaderboard is set to New York/GMT-05:00