Leaderboard

It's a 82 or 83 c195 "super C" I built this tractor to be a worker not a show tractor so it is equipped and setup for ease of use but even saying that it still looks very nice - I repowered it with a 700hr 20hp Onan from a 520h, -it has both hand and foot pedal hydro control, -linkage has been modified to make pedal smoother but it also adds about 1-2mph and allows u to have full speed in reverse -I spliced in gear reduction steering -has led volt meter, vaccum gauge, digital tachometer and correct and working hour meter for the engine -very nice original d250 seat -working and strong 3pt hitch -led headlights with additional set mounted at bottom of hood -2 sets of rear weight (inside white 25lb each\outside is WH red case weights I believe weight about 45lb) -front hub caps -new rear tires 2 years ago and new fronts at beginning of this year -aux 12v hookup --im sure I'm missing some things but like I said this was a work tractor, it does have a couple negatives, -its sat for the most part atleast a year with a couple exceptions, starts up and runs no prob but carb needs to be cleaned and tuned up, I adjust the choke handle to smooth it out is what I mean.. --im pretty sure the mid lift cylinder has a drip, which is the same as other WH cylinders so can be redone fairly easy -the wiring needs cleaned up, at one point I had a cab and 4 way plow hooked up so some of the wire from battery need cleaned out and everything straighted up.. *I'd take 1400$, I might also consider partial trades for pre 65 tractors or attachments, or a D series snow plow.. there isn't another c195 out there setup like this, it is a beast and fun to drive, I do not need to sell I'm only listing because I used my loader to plow last year and and pry going to this year and hate this girl sitting.. Pickup only Lynn Indiana ** For some additional $$ I have a brinly 3pt garden plow and a homeade 3pt stainless steel weight box with aprx 175-200lb of wheel weights in it that is pretty nice, also a nice snow cab that was for my old c160 that I used on the c195 id sell but only in addition to the tractor not selling by themselves

This is a wheel horse d160 with 16hp Kohler, and comes with a 60inch wheel horse 3pt finish mower.. tractor has working 3pt, front and rear pto, mid deck mule drive, and turning brakes, I also added a above average original wheel horse seat with arm rest like was offered for the tractor new... I originally was gonna let my 10 year old help me mow with this but it is way to big for him, I've already had one guy back out on me so plz only serious inquiries. It's a good tractor, it runs and drives, 3pt works and rear pto spins, mid lift works... It needs cleaned up and a few minor things and will be good to go, - Needs a fuel pump I just don't have one in my inventory at the moment, I have a gravity tank hooked up to get it running and test the systems, I'll leave it on to load but will take it off -the front driver side tire doesn't hold air, tractor comes with original rim but will need new tire, comes with the spare on it too -deck is 60in and spins and still a solid deck but has definitely seen alot of use in it's life, not a beauty queen but still usable Any questions ask, this is one I wouldn't mind keeping but tractor and deck are pretty big $1100$ obo or I would sell just tractor for 900$ pickup Lynn Indiana only Can PayPal and pickup later but tractor will have to sit in carport