Leaderboard

I have a brand new 1991 P220 engine that is just taking up space in my shop. I have had it for at least 20 years and was planing on using it but never did. I removed the plastic plug, installed a pipe plug, filled with oil and started it up to make sure all was good. Located in central Alabama. . Local pick up only. I have a link on youtube if you want to hear it run. https://www.youtube.com/watch?v=2qXx_tCCviM I don't have a muffler so I could only run it for a minute. This engine fits a 1989-91 Wheel Horse but could be made to fit most anything. Make offer . Thanks.

Got this as a roller and installed an unused Predator my dad had. This was my snow pusher until I put the fat tires on it. I upsized the pulley so the top speed is 8 mph. It pushed snow in high gear with no problem. It has oversized tires and wheels and it starts on the first pull every time. It also has fluid in the rear tires. The machine is very straight. Below are the old pictures when it pushed snow and how it looks now with the fat meats. @WHX?? has offered to get it to his 10/16 plow day if someone needs hauling help. IMG_5963.mov

Good running tractor that has been “re-wired”. It works fine but if I were to keep it I would add the proper key switch. I have the switch to go along with the tractor. It has a slight hydro leak if it is used hard but normally it doesn’t drip. It has new tires, fluid in the tires, and pushes heavy snow easily without chains. It has a nice seat. I have the PTO setup for it also. The weights and hubcaps are not included at this price. The video is when I first got it to test the limited slip. I have spruced it up a bit since them. FullSizeRender.mov

I recently bought out the service dept of an old closed down dealer and have lots of nos parts Tecumseh starter-45 Nos Kohler solid state ignition-125$ Used Kohler solid state ignition-75$ Several nos pullies, 4inch 1⅛ engine pulley 40$ each Cast single groove-25$ each Cast double groove-45$ Non cast double groove- 35$ Snow blower pulley-25$ PayPal or pickup only, additional for shipping if needed I have pics of all part numbers for pullies if requested