Leaderboard

I've been wanting to restore a small tractor (preferably a Wheel Horse) for a long time. I finally bit the bullet and found a 1967 Lawn Ranger in fair shape and very complete. My goal is to give it a "frame up" restoration. I'll try to document the project as I move forward.

A buddy sent me this tonight. What a prize, more than a big purse that could be spent easily!

Just picked up some weight bench weights for more ballast "stackable". I think they are going to work well

Reminds me of an old anecdote from my police days. We had a guy on our patch who had a brain disease, made him appear drunk and confused all the time. He couldn't speak and communicated via a series of grunts and arm waving semaphore to get his point across. He was harmless enough but not very hygienic and so he was barred from every shop, pub or restaurant in the area (he would wander in and upset the patrons and was usually propelled out the door with free a sandwich or drink). He also used to drink a lot and so pubs were his natural environment, somehow his fuddled brain would try to get him a pint usually without success because he was well known in the area. One day our sergeant was out on patrol in a tiny village about 5 miles from this guys usual haunts, he spies said vagrant wobbling toward a very up market village inn, full of the gentry. "Hello Dennis old lad what are you doing all the way out here?" Quoth the venerable sergeant as he gently guided Dennis into the back of his patrol car. "I'll give you a lift back home cock, you must be knackered walking all this way." Dennis waved his arms and grunted in protest but our hero simply fastened his seat belt and drove him back to more familiar surroundings, all windows open. Dennis had somehow recalled this village pub and reasoned that he was probably not barred from it, it had taken him all day to shamble his way there and he was halted yards from his goal by our stalwart stripey. On the dark winter evenings he would cause traffic carnage by wandering into the road, forcing drivers to avoid him. There were car wrecks all round but Dennis never got a scratch. One day a gang of road workers who had seen the chaos he wrought in their work area decided to act. They captured Dennis and despite stiff resistance they managed to get a hi-viz yellow vest on him which they superglued the zip shut on. There were no more road accidents now that a reflective Dennis could be identified at a distance. And you think you have problems with Raccoons lol.

Predator swap…

Wheel Horse had been involved with NASCAR for several years. They sponsored the Pole Sitter award for several races including the 1992 Mellow Yellow 500 at the Charlotte Motor Speedway where Alan Kulwicki won a new 416-8 Wheel Horse.

I think someone needs to give him a new set of tires! He must be tight in, loose off, burning that right front down!

Hey guys, I just saved another piece of old Iron from the scrap heap. A guy that works at my shop bought a small hobby farm from a deceased family member. He tried to use the tractor but broke a belt, so he parked it and went to Home Depot and bought a new unit. Got a call and was asked if I wanted it.....as my truck was being started I got the address. I have to say the OP must have cared for this tractor and maintained it well. Their are the normal things that go bad but it sure is in great shape for a 73. Having a hard time finding the belt sizes for it though. Sure one of you know offhand what they are. Need the belt for the 48in deck and for the drive unit. Thanks guys

ID tag says 1929 Waukesha . Notice both cracked heads .

Update: So Russ got back home a few days ago with new pacemaker installed but had a dizzy episode and was rushed to hospital. He has since been discharged and is now in a rehab place. Hopefully it will be a short stay and he can get back home.

@Oldskool... Did you literally "pick them up", or did you have to buy them ?

Try here Kohler Starter Rebuild Kit | Kohler Starter Solenoid | PSEP.biz

I did all of them. 876, brought home March 08, 2021 Seems I lied. I brought the 141 home on Oct 28, 2020 Casper The 656 I brought home Nov 20 2020 Brought home the 125 Mar 28, 2021 The 175 is patiently waiting it's turn. I brought it home May 09, 2020 The first Massey I inherited from my Father In Law. I did that in 2017. I can't find a before pic. It's hiding in this computer somewhere. The 2nd Massey I brought home Sept 09, 2020 The John Deere I have had for a while. Just painted it Thursday.

I have started my Woodchuck control program. Paid for in sweet corn by my Amish truck farmer neighbor. I have been removing 15-20 every year around the 36 acre farm. They are really are destructive to the newly planted cantaloupe seedlings, walking down the plastic covered row and nipping off every plant. And a burrow in an area where a horse may step in a hole.... Oh, They do not get relocated to become some other farmers problem, they become food for the predators and scavengers.

No, grandpa hasn’t given him permission. I worked with him a number of years ago, he’s a bit odd. I know we all are in a way, but it seems he likes to stretch the rules and poke the bear. Now that I KNOW where the boundary is instead of ASSUMING, I can use the authoritive approach and let him know he doesn’t have permission, even if he ever did or thought he did before.

I think with your reasoning, you’re doing the right thing. As for the loft mechanism... do what makes you happy. Nobody gets rich on resale... so make it the way you want it and have fun.

Would you please apply for a consulting job with the Dept. of Homeland Security?

Spray paint the tails. Then you'll know . My guess is they will travel 2 mile to return. You may want to check with wildlife officials. It may not be legal to trap any wild animal in the spring after the breeding season.

A site search on the 6449 shows it crosses to the 11124 and is the correct Axle seal for the 1-1/8" axle hydro transmission. Width shouldn't be an issue.

We are booked!!!

Wow, your lucky day. Great looking tractor.

So wonderful an all American company supporting the most american car-racing

The Chevy small block V8 of garden tractors. Love it!! I've thought of picking up a couple. Good price.

Literally picked them up and put them in my truck. Free for the taking.👍

Storage and dump out in the heat UGGH! But on the bright side scored a 1" axle, rims, and tire off an abused garden trailer at the d.ump. Then on the way home an stop by HF to pick up a new dial indicator, and found some cool 12"×12" rubber diamond plate pattern adhesive tile. $4.20 including tax and i now have replacement traction stuff for Dugs foot boards!

Definitely tight in, needs a little track bar adjustment.

Just got a Kubota B2601. So far I love it. If you go bigger than 30hp, you get into the regen exhaust crap. No thanks. Pretty happy with it.

Not big compared to others posted, but... 26x12-12 carlisle on 10" wide miller blanks filled with just a bit over 9 gallons of rv antifreeze.

I'm on my 2nd year of my squirrel relocation program. I've live trapped a very very large number of them and amazingly have not made a dent in the neighborhood population. I think part of my success is I continually change baits. I think I will try some marshmallows as mentioned above. Sesame seeds work good, but also attract birds, so I stopped using them. I actually got some pecans for myself last year. I relocate them to a large green rectangular plastic container and pay a business to pick them up once a week from me along with other items that get picked up. I just don't tell certain "neighbors" how or where I relocate them to. But they don't become someone eases problem!

IMO, while you are doing it, repair or replace all worn parts.

Oh I got it. Remove all 3 and check the wires themselves. Ok I'm going to try. Thank you for the diagram. This is a big help.

Mahindra, Kioti or Kubota

Or how long they can hold their breath underwater?

Don. Sounds like great advice. A good idea can turn out to be a bad one once it comes up against reality. A young lad near me asked for our advice as he fancied becoming a dog walker. I told him the same thing, study the market, find out if there are potential customers, think about insurance, think about security, you may be asked to collect dogs from peoples homes so how will you uphold their security, strong leads and harnesses as you can't always trust an owners gear, time management to be where you promised to be etc. Didn't take long for him to decide starting a business might not be for him.

You know the rules Matt... No “looking” allowed. Riding, sure!

The only thing I’d do to it would be to change that gas cap

I’m booked but just for friday night. See y’all then.

I used to see jeep guys running those a long time ago. 31s are they?

Thanks for the welcome everyone. As requested here is a pic.

It would be helpful to know the year/model number because not all Wheel Horses are wired the same. If your engine is the Kohler Magnum series there is a small voltage regulator/rectifier attached to the engine cooling sheet metal above the flywheel. There you will find a flat three wire terminal, with the key in the ON position you should have full battery voltage (12 volts DC) on the center terminal. If that is not the case then take a look at the wiring from the engine to tractor and the fuse, if so equipped (not all Wheel Horses have the fuse in the charging wire). From the fuse the wire continues on to the "R" terminal of your ignition switch. Your voltage regulator/rectifier will not work without a connection to the battery. If you have battery voltage to the center terminal then switch your meter to AC Volts, start the engine and run it at above half throttle. You should read AC Voltage of 30 to 36 volts between the two outer terminals of the voltage regulator and DC voltage of about 14 on the center terminal. If the AC voltage is good but the DC voltage is not then the regulator/rectifier is the problem.

You can get the real thing on for$ 9.34 a pair shipped free. https://www.ebay.com/itm/142042768245

I like Ed's way of thinking, if your tractor "IS" original, save it as is, it's only original once.

I remember it. It's not near as funny as it was 50 years ago.

He is taking that 314 around the Indy 500.

This is what happens when you hang out with free range chickens.

@RMARNARD, yes that is the stuff, since converting over to it on all my bearing , and lubrication areas , its been bombproof . it stays with just about anything , its got a similar rating to the john deere polyurea grease above , that polyurea rating is terrific. when I do over my bearings , simply pop off the side rubber shields , carefully wipe out existing grease , and refill with the hi temp. no whining bearing noise just solid quiet bearing performance , no failures since change over , pete

Well, the spacers are about $15 bucks a wheel. I don't really like duallies, and this is one way to add some stability without as much chance of snapping an axle. ...Plus the wider rear end looks good.

Alright then.... Take this....