Leaderboard

Friday!!!!!!!!!!!

I'll play

Went from this nasty looking pulley: To this: Added one of my custom spark plug wires too!

Been a long time since I posted. Hope everyone is doing well. I work doing HVAC In a medical center and have been working quite a bit. Anyway my son and I made a run to the local salvage yard today to cleanup all the scrap steel that’s been laying around. My wife was happy to see us finally getting some money for our junk instead of paying to get rid of it. Well..... it cost us $20 but we got another horse. let’s see how this goes. 312-8 with SD deck.

Carpet Bombed

Well I asked if I should and none of you stopped me, I blame all of you ! After seeing this at a garage sale and passing on it, I had a change of heart and decided to go take a better look at it. Well went back to the house and no more garage sale and no one living there. Drove by the house several times until today when I saw someone there. He still had it. Took me a lil bit to get it to "roll". I saw roll but it dosnt roll. All 4 tires flat, 3 the beads are broke. Put in neutral and had to rock it some to unstick it. Well the tranny spins. Now what? I was alone and he wouldnt help me. He has a hernia and going for surgery. If I wanted it I was going to have to do it myself. Of course the driveway is long and cant get my truck down it cause of all the " garage sale stuff" that was still all over it. Dragged this POS all the way to the street. Now what? I had my ramps but its not rolling because of the tires. First I tried lifting the front on to the tailgate. Guess what... cant do that cause this thing twists in the middle. Cancer has made me much weaker then I was. I used to be able to lift the front ends on tailgate then lift up the back to shove it in. Not anymore. So i was struggling hard to get it up the ramps when a 72 year old man taking a walk offered to help me. Thank God ! I shoved it from behing, then he held the brake until I got a better grip and footing to shove again. Repeated that untill my heart was thumping out of my chest and I got it in. Thank God again. Well here it is.... home now. It is still in the back of my truck as it started pouring rain right after I took these pictures. The owner didnt charge for it as he WATCHED me fight so hard to get it. Took me over an hour. Well its " ours " now. You know the drill.... I need help. Anyone with any advice on these I want to hear it. Can anyone tell me what that thing on the back is ? As you see it came with the snow blower... is that thing on the back part of the snowblower attachment? I need to figure out how I am going to get it down and try to get air in the tires. Wish me LUCK !

Slowly turning face from Friday to Saturday ... And the yellow and one is 20hp horizontal Kohler Command shaft driven like an xi.

1986 417-8 After purchase cleaned it up , tried out the RD deck then removed it and stored it. Bought this one about 6 years ago now with around 550 Hrs.

Geez... at 30 I could carry all that lumber under one arm, at 40 took a few minutes longer, at 60 one at a time, at 75 -THANK GOD for the Wheel Horse !!!! One load strapped on and this old guy moved it all in one shot... (sharp eyes will notice that the right front rim might still be yellow ) Grand kids must be on the way and we are staying away from the public playground !!!!!!! Mike B

Busted my butt getting this thing from where it sat to the back of my truck. Im talking damn near heart attack butt busting. Better be worth it !!! I will start a post in the " OTHERS " section. I need to stop picking up these " others". There is a reason why no one wants them but me.

Love the dual hydraulics.

One of each of us in our natural environment. Playtime. Others May incorrectly refer to it as work or chores. And a unique piece....

Good friend of mine and a great metro fireman as well of course he's retired. Stopped By when I was at a friends house today. This is part of his retirement he goes to various car shows and gatherings with this thing. It's pretty tricked out in great shape and I love him at car shows!

For the past 10 years I have driven past a Dunk the clown set up as used at Fairs about 5 miles down the road from our house. I have wanted to stop in and ask if it were for sale as it sits in the yard overgrown with weeds and tall grass but in the 10 years I have never ever seen anyone out of the house in the yard which seems strange and afraid if I knock on the door a clown in full dress and make up may answer the door and I may freak out like a little kid at the circus. Anyway, I was thinking maybe next year at the Meet & Greet in N.Berwick Maine because of the situation, we are planning to still have it this September. My question is do any of you members here have any idea who may make a good candidate to sit in the chair in full dress and go for a few dunks, do we have anyone willing to volunteer. Do we have any Clowns here up for the Challenge ?

2 fine vintage front ends on a Friday ... @pullstart

This pic was taken this morning, starting to put the 310-8 back together.

Hello Gents, I'm a new owner of a 2000 520Lxi. It's a awesome tractor which came with a mower deck, snow blower attachment, plow blade and a Trailor...great condition and I will be spending the next few days going over it ie, cleaning changing fluids, plugs etc. Would there be any issues with switching to synthetic engine oil? Also, I would like a bagger for it but don't think I will be able to find one so I'm go to McGuiver the one from my old tractor. Any pics or suggestions would be appreciated... Thanks Wheelhoarsers

This morning I had the honor of being able to pick up a Suburban 400 (at least that's what I believe it is). No data plate and the not original engine didn't run. Didn't matter to me, ever since I picked up a 551 for one of my buddy's a few years ago, I fell in love with the '60 & '61 series tractors. Luckily, this one was close to my house (40 minutes) and still available when I contacted him. The not original Briggs was in pretty rough shape so in order to quench my thirst to drive it before end of day, I decided to do a 3 hp, $110 Predator swap from HF. This engine fired right up and had no issue driving this tractor around. It's pretty fast in 3rd gear. Tractor still needs some work, but it felt great to get this 60 year old machine back out and running. And I love the duallies! IMG_0433.mp4 IMG_0435.mp4

Hi guys, WheelhorseBob here. I'm fairly sure I was a member long ago but competing interests won the day. Anyway, I'm back and I finally have a life long desire fore filled. I just acquired a 520H born in 1993. I've owned a bunch of "Horses" over the years but I've always wanted a 520. This one needs a little cleaning etc.,but with only 318 hours I'm thinking it will be a keeper. Came with the 48" rear discharge deck and 44" dual stage snow blower. The attachments are in very nice shape. Anyway, I've never mowed with anything but a Wheel Horse and I'm 54 yeas old, I currently have a mint 312-8 with a 42 inch recycler and a 310-8 that has a 37" bagger for fall clean-up. Three Horses, I may have a problem...... -Bob.

Trying to keep you guy's cool out there with another Winter side shot.

Fogerty to me is the best . OK maybe Springsting and he is my hero. Had the pleasure of meeting John a few years ago when I worked at the opera stage. Love hismusic and that of Creedence Clearwater revival!

Drove that a bit... Nice rig.

When I was using the 160 for plowing snow, I wanted to be able to move the blade and keep the left hand on the wheel. So I can operate the lever with a couple of fingers. There used to be a big mower scrapyard in the next village over and he had a C-160 hydro carcass in the pile so I cut the hydo lever off and cut the OE hydro lever and made what I think should have been there from the beginning.

Bob welcome I'm new myself. I'm told there is no such thing as to many horses. Maine is certainly beautiful country. Enjoy

In this order... ...and then.

wow - outstanding !

I will provide hot water for the tank as I have Hot & Cold outside faucets on the driveway side, just no peeing in the pool.

With all this humidity I needed a pic with some snow in it, sometimes the cold beer just doesn't do it, but a WH does.

See my welding thread. Bought me an antique Lincoln. Taught me how to stick a couple pieces of metal together. Built the axle for Colossus. Patience man. Patience....

lRV !!!

Just finished several upgrades to my 414-8. Installed Wheel Horse Parts and More rear receiver hitch (excellent product). Also installed front receiver hitch, new gas cap and new 8" narrow wheels with Deestone Try Ribs. Can't wait to do some plowing.

Just like this one...

Thank you sir. I cut them and my boy glues them together. Thank you. I’ll tell me son. I just love watching him weld them together and it’s father/son time. Now I’m gettting lessons too. Not doing too bad either but nothing like that.

I'm of the mindset that the most important thing is to Change the oil on time.....

Ok I'm in. One of Trina's Mama on the Cinnamon Horse. The other of course is Trina on her own Pig Pen. Note .... They're both making interesting faces.