Leaderboard

Does look good, but here... I was expecting something more like this.

It's that time of year again so I have started a store wide 20% Holiday Discount at redoyourhorse.com The discount will run through December 18th. The discount is applied in the shopping cart and can be viewed before finalizing your purchase. This discount is in addition to the RedSquare Forum Support Members Discount avilable to all paid forum support members. All support members who have contacted me with their forum username and have registered at redoyourhorse.com will see retail prices 30% lower than retail when logged in to your redo account. Your support member discount will then be discounted another 20% during checkout. If you have been thinking of becoming a paid support member and are needing decals for your tractor then this would be a good time to take advantage. If you are currently a paid support member and have not registered or have not contacted me with your RedSquare username please do so before purchasing to take full advantage of these deep discounts. Thank you all again for your support of this forum and we wish you all the very best this Holiday Season

found this 3 blocks from my house, $200, stuck a battery in it, and air in the tires, and my grandson drove it home. may be GT1600? everything is painted over, has gray where the paint is coming off. The old guy I got it from said he painted it after 9/11 Motor sounds good, otherwise it's kind of beat, most likely will part out. I have a 414-8 with a locked M14 motor, possible engine transplant? will it work thanks in advance for any advice Ed

I got a call last year to appraise a guy's Wheel Horse for him. I went and met him and he said his uncle had this 1963 WH he wanted appraised. I told him it wasn't a 1963 but a 1961. He didn't believe me since his uncle bought it new in 1963. It has a replacement hood on it and a later square seat. So it could have been fixed up at a dealer and sold in 1963. The tractor wasn't running at the time I met him and had no spark. He worked on it for days but couldn't get it to spark at all. I appraised it for him and he said right away, did you want to buy it? I said yes and tried not to act too excited! He wanted $300.00 for it and I said I would take it for that. He called me a few days later and said his uncle didn't want to sell it after all! Dang that sucks! I got a call from him the other day and he left a message to call him. I got all excited thinking he was finally ready to sell it to me! But when I called him back he said he wanted me to repair it! Bummer. So he dropped it off last week and my buddy and I wrenched on it for several hours fixing all of the non working parts and replacing all the wrong parts on it. Turns out the coil was wired wrong, both diodes were in upside down and blown out, the gas tank was gummed up with varnish and the carb needed rebuilt, the wiring was all rigged up and needed figured out! After we got all of that repaired, I put a shine on it and it cleaned up pretty nice! He probably won't recognize it without all that barn dust on it. So it has the original H55 Tecumseh on it and it runs like a champ now! It revs up pretty high and sounds great with the original muffler and long pipe set up. It's a nice tight motor and a great style of WH, one of my favorite models they made. I got the muffler guard put back on and the drive belt guard put back on too, not pictured though. So it is a nice factory looking unit now, I charged him $200 to do all of this work which was pretty cheap I thought. The right side of it is cleaned up and the left side was still dirty at the time of these pics. I haven't got the final pics of it yet.

What a fantastic calendar this year. Martin along with Vinylguy deserve a round of applause! This calendar is a milestone, Even the Dino got in! Prices for the calendar have increased slightly. The good news is I can ship 3 calendars in an envelope to save on shipping! Here are the prices. These all include Priority Mail Shipping. These are all U.S.Dollars In the lower 48 states 1) $ 24.00 2) $ 43.00 3) $ 62.00 4) $ 86.00 5) $ 105.00 Canada 1) $ 37.00 2) $ 56.00 3) $ 75.00 4) $ 99.00 5) $ 118.00 Europe 1) $ 45.00 2) $ 64.00 3) $ 83.00 4) $ 124.00 5) $ 143.00 Payment can be by Paypal or personal check. IF YOU WANT TO ORDER A CALENDAR PM ME!!!!! DO NOT ORDER IT ON THIS THREAD!! Send me a pm with how many and which calendar you want. Include your mailing address and how you will pay. I will respond with a pm with either my paypal info or my address.If you do not hear from me within a couple of days after you send the pm,pm me again. I don't want to forget anybody. All calendars must be paid for before printing. I do not want a bunch of calendars left over. THE LAST DAY TO ORDER CALENDARS WILL BE MIDNIGHT DEC 13TH!!!! I need to get these done to get them out before Christmas!! Thank-You Squonk (Mike)

You guys know it's only a matter of time before I have a complete shop, equipment included... Gonna get Terry to make a decal for it. Started on it yesterday, will wrap it up tomorrow. Think this will void my warranty?

When are you ever there to "use" any tools?

i can't tell you how well they work with wet snow. i know my walk behind Ariens does ok with the snow, wet or powdery, just push it in and let it work. it has never really clogged that bad it didn't clear itself. but we are talking about a two stage compared with a single. when it gets all done and the snow starts flying, i will let you know....... weather was warmer today, so i pushed the 416 out and set up the blower as much as i could. still have a few things to finish off as well as the chain, but got the chute rotating nice on the rollers, i hate them by the way, but thats what this one has and i will just deal with it. adding the plastic base that was offered would probably help, but a small amount of lithium grease in all the right areas got it rotating smooth. i will hook up the cable when i get some more time. also had an old belt, so checked out the pulley alignment and operated the belt a few times turning the drive shaft. nice, quiet, smooth... more pics for the pic junkies......

picked this up yesterday on Craigslist , it pays to keep checking. NOS Tecumseh HH60 short block less crankshaft. date on the packing list is 1978. i'll probably finish the assembly and use on my lawn ranger

Don't for get wiping the water glass rings off of the roundhood end tables!

I keep hearing the economy is sposed to pick up next year. Just like they said last year...and the year before that.

cmon Craig, just admit that it was harder than you are letting on. you don't have to hand in your man card or anything........ you had to go and get a camera, walk up to the calendar pinned on the wall. then take a picture. just be honest and admit that it was a lot of effort. we won't think anything less of you. you probably even had a rest along the way, maybe cracked open a cold one , watched a little tv......

got the drive belt in the mail today, so went out and finished up everything on the blower. got the chain all set up, cut the length to 51 links like the original, lined up all the sprockets with shim washers and installed the chain. double checked all my bolts, installed cotter pins in all the areas i temporarily put hairpins and gave the whole blower a good spray down with quick wax. chain, idlers etc installed.... new belt fresh from ebay, this one was $20 in a sealed bag, not sure what they run at the dealer, probably more i would guess. chain guards on. all done.... came inside to get a bite to eat and after a while look out the back window to see Kent out on the back driveway with a shovel messing up all my test snow........ so i finished up my lunch and went out there, but not before putting my coat and slippers on. i thought to myself how dare he exert energy! i was wondering if he was feeling ok, working and all.......after all he is a teenager, what will he be up to next????? actually i already know the answer to that, having 4 others that have gone through those years already...... anyway, i said to him to stop that working thing immediately, he might break out in a sweat and I'm sure he didn't want that to happen. i did manage to get him to hold my phone for a few minutes while i tested out the blower on what was left on the driveway (which wasn't very much-darn kids......)

It is going to be hard to take a picture of the quality of these calendars...these really are like you would find in a store...and well worth the money.

Excellent calendars Martin. The pictures from the members that you used are Top shelf. I am humbled that you chose one of mine...Thank you. OK, take a deep breath and get out the lawn chair with your favorite cocktail. You deserve a nice long break. Outstanding Mate. All should know also, the calendars that Squonk will be taking orders for are professionally done...they are like if you bought them in a book store. :)

After yesterday's detail job, I did on the Tahoe, I thought I would share a tip I found out.... So the nice tan carpet, had some stains, from my wife. I asked where the carpet cleaner was. She says, all out.... So I start to pilfer through the cleaning materials, in the house to see what I may be able to conger up..... Head to the basement, nothing in the cleaning cabinet that catchers my attention.... I see it... SHOUT. This stuff is amazing on clothes, why not give it a try on carpet.....To make sure I don't "over do" it, I mix a bottle of 1/4 SHOUT, 3/4 water...... Here is what I did. I started with the back area. I vacuumed all the dirt first, then I used the solution, on any area that had a stain.... Soaked it real good.... Then I went to each passenger seat, did the same thing... Finally did the driver and front passenger area. This gave the rear time to settle into the stains.... Then it was time to find the carpet brush.... NO BRUSH...... I used the tip of the Shop vac to scrub first, then I turned on the vac.... All I can say is, I wish I would have taken photos of before and after.... That stuff works AMAZING! I think one could do a 50/50 mixture on really tough stains.... I did have a couple that I will try the 50/50 on. the 1/4 mixture did eliminate most of it, just needs some final "muscle" to lift the stain...... Thought the members could post what they have come up with as little detail tricks that maybe we have not thought of.... Rob

Martin. Nice job. Just like when you do a tractor. Carryover. First class. Glenn

We are ready for snow in Central Pennsylvania. (Not Buffalo Snow)! I would like to say I won't need to even fire them up this year. I find the older I get, the less I deal with snow and cold weather!

Just finished getting ready with the 417's. Had to make a new frame for the snow cab and added some new weight to the blower tractor. Need to paint these in the spring.

the past few years I've been using a blade and my walk behind Ariens. this year hopefully i will be using the blower that I'm almost finished rebuilding.

EEEWWWWWW!!!!!!!!!!!!!

I'm lost on what to do this 420 lse has 290 ish hrs price is but has been poorly maintained and cared for runs good he says and no # on plate out of 200 just has guys name and specail edition. Price e is 2000 obo comes with tiller that's almost new.

Ahh...there's the profit. Selling rides on it at the big show... I'm in...for a buck.

Oh yeah, almost forgot... folding the laundry on the HY-2 702.

Issues.....

And the year before that, and the year before that, and the year before that. What, for about 6 years now?

Nope...down in the basement sniffing for gas fumes.

Might be a challenge to flip that one for profit.

Hey now, that's a good tip... is that where you keep your Mrs Geno?

I don't know... them damn sediment bowls do impart the vintage look... but, seem to always develop fuel leaks of some type. Nothing worse than a in the garage overnight...and being awakened by a shrieking Mrs. in the middle of the night... with the dreaded..."I smell gas" "What? Are you trying to kill us?"

Martin: One of maybe ten people in the entirety of the United Stated of America -and the world for that matter- cursing teenagers FOR doing manual labor...

I had these two out of the garage today while I was doing a little cleaning and figured it was a nice time to get their first picture together..I bought the 854 off Buckrancher for my son Cole a few yrs. ago at the BIG SHOW. The only thing other than maintaining it that we have done is add tri ribs and ag tires.. The 854 hasn't been run in at least 5 month's,. I added a little fuel bumped the key and she was off and running. You won't ever see the 854 in the classified's...

Bob, I thought he meant getting ready for T-day....like stockin the basement fridge with beer, making sure the TV remote has good batteries and that my eatin pants are laundered! Mike..........

Won't the sediment bowl somewhat separate water from fuel?

I would run both, done it for years. You get the extra filter to do the work and keep the sediment bowl for the coolness factor.

Very nice job Martin, very professional.

Pulled the left side plate off and removed all the gears. Aside from the axle bushings, seals and brake shaft bearing everything else looks good. Bob here's a pic of the inside of the 2/3 gear.

Hey Brian, don't throw out all your bent and broken parts. By the time you are finished you will have a complete set of patterns to build another one!!!!!!....... very nice work by the way, piece by piece, exactly how i would expect you to handle it. this old girl has been waiting for somebody like you to once again make her look and operate like she did a long time ago.

Great tip Rob, but shouldn't it be in the SHOUTBOX?

Was nice to hang out with you again Ken, it's been a while. Tractor definitely went to a good home. She treated me well last winter, and hope she does the same for you.

Mack - Nice Fleet! I'm still on the look for a FEL.... Sure would like to find one at a decent price.... Denny - those Illinois winters can be LONG and COLD! That should help keep that white stuff at bay! Ron - you also know those Illinois winters..... I like the pint job on the 857, well done! When I was grwoing up, my neighbor had a Case 446, I always did like it. He had the rear hitch also. Paul - glad to see you and Shaun survived..... Great seeing some action shots of that MONSTER chute in use! Martin - OUTSTANDING job on the rebuild. Can't wait to see some videos of that in use. Scott- I was wondering when the every popular "V" blade would appear! If you ever want a project for an "xi", let me know! That blade ia aswesom! Boo - NICE PHOTO! I think, you are probably the only member thus far, that has decided to als be part of the herd pic... We all know the horses don't move unless someone is setting in the seat! Looks like you have duals on the one with the FEL... Looks good. Rob

coming apart......

that seems to work for me too. just don't lean on them too hard, rock them back and forth a little.... don't get impatient and try and unwind them all the way in one go. once you get them to break free, go back in a little and back out again. at least with the kohler k series you aren't dealing with aluminum. now thats some fun times.......

glad some of you guys are happy with the final result. there are quite a few new members on the forum who made it this year and unfortunately some of the regular calendar finalists didn't make it. there is only so many spots and it would have been even harder if there was only one version of the calendar instead of two. I'm sorry if some of you were expecting to be in there and are disappointed, but i think the results are a well rounded selection. and with spaces so limited, there was no way to squeeze any of mine in there. guess i will just go and make my own with mine in it.....

Here is what I was and mostly will be clearing snow with Here is my backup

My 857 does a great job if the snow isn't too deep. BUT,there are times when I need to get out the big gun, my 4016 Case w/ a 48" snowthrower. I find plowing is a lot more fun then blowing.

guess were ready !