bds1984 1,466 #1 Posted July 20, 2016 Well since it seems next to impossible to locate a decent grader/belly blade for less than an arm and leg, I decided to fashion my own blade with a 42" dozer blade I picked up for free earlier this year. I cut the blade in half lengthwise and added a six-inch section to each end to get a total width of 54". Here is my progress. 14 Share this post Link to post Share on other sites
steelman 252 #2 Posted July 20, 2016 Great ideal! I have an old blade with out the handle and may give this a try. Share this post Link to post Share on other sites
bds1984 1,466 #3 Posted August 5, 2016 Well I think I am pretty much done with this blade. Not too bad for a thirty dollar investments (paint, bolts, and cutting edge)! Now to test it out! 3 Share this post Link to post Share on other sites
woodchuckfarmer 333 #4 Posted August 5, 2016 Looks real good. Share this post Link to post Share on other sites
Jason P 7 #5 Posted August 5, 2016 Let us know how it works out. I've been looking for a grader for mine. Share this post Link to post Share on other sites
Horse Digger 52 #6 Posted August 5, 2016 (edited) Yea, great idea, here in Sweden I have never seen much implements för the WH, so finding a grader seems impossible. I made me a snow plow for my small tractor a couple of years ago. Perhaps I should try making a grader, the design looks pretty simple. Attachment should be on rear axle, and hight control at the same lever as used for mower deck, right? Anyone have a picture with dimensions? Edited August 6, 2016 by Horse Digger Share this post Link to post Share on other sites
meadowfield 2,650 #7 Posted August 7, 2016 Great idea, agree deck lift lever will work just as it did on the plow Share this post Link to post Share on other sites
AMC RULES 37,144 #8 Posted August 7, 2016 Nicely done. Let us know how it works out. Share this post Link to post Share on other sites
